so fast buy the 8FG already ah .... PG orang memang RICH !! hahahaha

benny never persuade u to buy M3D meh ?? hehehe
super light and fast heli worr that one .... no personal experience from me la of coz

u will find the 8FG a very flexible/versatile radio
good luck on your 600E build ... hehehe

we live and learn ...
anyways ... i am enjoying myself with my quad for now
new firmware makes it fly like a champion .. hehehehe

gonna put some LEDs on it for nite flying soon

waaa .... u never tell your dotter to stay away when u flying one meh ?
i always tell my kids to stay behind me if i hovering or flying with them around ... danger danger

if your swash is as level as possible then almost no trim needed ... very very minimal trimming
try to hover it at least 1m off the ground otherwise ground effect/rotor wash will make affect it
watch for wind oso when trimming ... hehehe

why la wanna let go this hobby ?
selling off your stuff u will lose a lot ...

u know what to do the next time ... hehehe
if u did not panic u could have just punch the heli up high high ... but too bad u did ..

this guy damm popular laa .. got video just for him only .. hehehe

just have fun ... that is the most important
can always request pics not to be taken one if camera shy like me .. hahaha

there are 3 RC shops in amcorp mall PJ
and there are a few RC shops in berjaya times square too
go take a look ...

---

Added on November 1, 2011, 9:10 ami noticed mr daddoo trademark is cigarette and coke can during his flying sessions .. hahahahaaha
die lorr .. his habits oso kena spotted .. hahahahahahaa

This post has been edited by QiW: Nov 1 2011, 09:10 AM

this one ah ?
very hard to see the heli laa ... or maybe my eyes old liau cannot see ... hehehe

eh ? i tot someone said no $$$ for 8FG ?? hahaahahaaa

anyway ... i set mine to SWITCH instead of CONDITION (default)
so i can flick it between rate mode and HH mode anytime i wish .. this is useful for getting the full travel of the servo @ GY401 style gyro setup in rate mode
when set to SWITCH then use the #1 #2 #3 to set the modes and switch ON/OFF positions

---

Added on November 1, 2011, 2:43 pmanother thing ...
why la u FLY SO HIGH one ?? hard to see orientation leh ... hehehe

This post has been edited by QiW: Nov 1 2011, 02:43 PM

10m is 30ft+ ... apprx 3 floors up
quite hard to see already lorr ...

u no $$$ ??
loan shark ??
maybe U ARE THE LOAN SHARK laa .. hahaahhaahahaaaa

ps. i can see your TOYOTA HARRIER in the background one maa .. hehehe

---

Added on November 1, 2011, 5:00 pmyes .. i use one of the 3 position switch to select what i want
just change the ON/OFF position for #1 #2 #3 on the same switch

told u 8FG damm good radio .. hehehe
i will be performing surgery on my 8FG soon ... to boost/extend range

This post has been edited by QiW: Nov 1 2011, 05:00 PM

time to re-build my PRO
stripped a gear after playing around with auto ... hehehehe
changing cyclic servos too ..
re-wire everything nice and neatly

i dont like the v2 canopy ... too long
i prefer the PRO canopy shape .. roundish type

thats becoz it was made ready for 3 axis gyros
just inhibit the others and use rudder only if u do not have 3 axis gyro .. hehehe

who knows ... maybe u might get a FBL system in the near future ? hehehe

u should enable all the gyros if u using 3 axis
to avoid tip over ... do simple test
just hold the heli and tip it sideways as well as forward/backward ... look at the swash and see if it tries to level itself
if it does then gyros are working in correct direction properly
if it does not then change gyro direction ...

most tip overs are caused by not checking gyro directions .. hehehe
the rudder gyro no need to say u know how to check la for sure ...

it is your job to make sure there is minimal vibration maa ..
initial setup dont set your gain too high lorr ... just set the rudder one high enuff to hold ... the rest can slowly play play ... hehehe

my only experience with 3 axis gyros are my 4G6S and my multirotors
so i dunno how to play with FBL system .. ehehehe
if i ever go FBL and 3 axis ... u would be the one telling me what to do already ..