Hardware needed:
Nokia Data Cable(CA 101)
Female 2 Female UDB Adapter
Software/Files Needed:
Kernel Power v45(Get from Application Manager)
h-e-n(Get from Application Manager)
mount.desktop -
http://www.mediafire.com/?53b93ly966qkhqwflash.sh -
http://www.mediafire.com/?53b93ly966qkhqwmount.png -
http://www.mediafire.com/?53b93ly966qkhqwGetting h-e-n to work:
1)Download kernel power 45 & h-e-n from Application Manager/Faster Application Manager
2)Reboot your phone
3)Copy mount.desktop to /usr/share/applications/hildon/
4)Copy flash.sh to /usr/bin/
5)Copy mount.png to /usr/share/icons/hicolor/48x48/hildon/
6)Open Terminal
7)Type “root”
8)Type “chmod 777 /usr/bin/flash.sh”
9)Exit from terminal & add “Mount Data” shortcut to your desktop
10)Connect the data cable,female 2 female adapter,your preferred device & the phone to each other
11)Run h-e-n application
12)If your device is using FAT32 file system tap the following : High Speed Hostmode -> VBUS boost ->Enumerate->Mount->Mount
13)If your device is using NTFS file system tap the following : High Speed Hostmode -> VBUS boost ->Enumerate & now minimize the application & tap the “Mount Data” icon at desktop.
14)Open “File Manager” your drive will be displayed there.
15)In order to unmount the device you can simply close the h-e-n application.
Notes:
The h-e-n application must be running as long as you want the storage device to run.
After setting all the files,next time if you want to use your storage device you just have to follow step 11 to 15.It’s quite easy to use OTG now.
The reason why NTFS mounting different is because this file format is developed by Microsoft & normally not supported under Linux.Different mounting command needed to do this.
In case you’re stuck under reboot loop after installing kernel power v45 use the following command to flash your phone.I’m assuming you’re following the frontpage method of flashing so I’ll be using R.bin as image name.
CODE
flasher-3.5 -F R.bin --flash-only=kernel -f -R
Credits:
Titan : kernel power v45
h-e-n team : h-e-n application
Eiraku : Desktop shortcut suggestion
meLi : For suggesting to execute command using busybox
If there is any mistake in my shortcut do inform me & I’ll rectify it.