i almost kill my r3e tho...i'm not sure what's the reason..but is restart's suddenly and then i was unable to booted up even on default settings...

BSOD comes in whenever after BIOS loaded.. ..tried to completely off for 10 mins and run again..

i was so relieved that it booted up safely.. ..but i could here some current on the board SB when load.. ..

o.O
ur using any waterblock or something bro?
macam ada leak je .
try check for any current on casing

cannot find any leak bro..

i'm using full block on board..at that time my QPI/VTT was at 1.4v@ 34xx uncore..is that too much..??..i'm on i7 965..can't expect to lower the vtt on c0's..huhu..

dem.. u using same case as mine .....

---

Added on June 1, 2011, 3:19 amgot leak..? aiya scary.. better go take hairdryer and blow.... let it for two days or so if u lazy to dismantle the block.. hmm can meh..????

This post has been edited by kakicam: Jun 1 2011, 03:19 AM

i don't leak is the issue here..coz the water in the res doesn't becoming lesser and lesser..

maybe is due the high QPI/vtt.. ..btw, i just let it at stock for now..

i dont mean ur WC leak man >.<"
i mean current leak .
not good grounding or something .
got static on ur casing or something ?

current leak..? how is that possible.?

idk how to say la .
but i dunno if u've experienced it before .
mine if i plug my PC into multi socket, normally i will get static all over my casing .
i have to use a dedicated wall plug just for the CPU .
idunno y it happens like that .
that's wat i meant .

maybe current flowing through the whole system .
current leak >.<"
electric not water .

not sure if it gives effect to hardware or not .

i've checked everything bro, no current leak at all..i think is due to my proc IMC or my setting for oc is not set correctly,

it's all started when my system restarts automatically when i was playing game, after that, i didn't manage to booted up to windows even on default setting..BSOD comes in after the window loaded...

however i've manage to take not on the BSOD ss, it indicates something bad pool management or head someting like that with the code 0x73fe6473 and memory management error 0x0000003e..

i'm quite scared to oc now..afraid will loose my board for the second time and it take quite some time for rma..

Try with different set of ram??Ram might be one of the culprit

yup ram can also be the problem

that's what i suspected too..but, i got no extra rams to try..

i can hear an 'eeee-eeee' sound on the board and it is obvious especially when extracting the files..

besides that, i'm facing some kind of lagging or jemm for several seconds when playing games sometimes..huhu..

maybe u can test with just one ram at a time and see if the problem solved. that way u'll know which ram is damaged..

hurm, well like me i do get lag sometimes but mine is bcos main hard disk dying i think .

hopefully not for the next few months cause im doing my final year project .
aih .

last night instead of 3gb of rams, my system detected only 2gb..

i've took one stick out to find which stick is the culprit..however, i found that all stick actually works after trying each stick on only one slot..after that, i tried each slot...all slots are working.. ..

trying to re-slot back all the rams, 3gb detected back..

ur R3E sot sot liao... better check properly..

what do you mean bro....??

i've run linx on default setting w/o issue..kinda weird..

my ur oc not stable bro??
or the plug got problem or PSU??

Lol.. funny. Dont you realize you're also using TJ07??
Or just pretend to be ... ?

This post has been edited by gengstapo: Jun 2 2011, 05:02 PM

ZzZz
its still expensive bro >.<"

anyway, 3gb detected bcos ram clocking unstable man .