eh i forgot 1 thing, update bios using bootable drive for R3E is using AFUDOS is it ?

update : done using ez flash 2 >.<"

This post has been edited by monsh: Mar 6 2011, 02:00 AM

2k c6 ?
what chipset is that ?
PSC or wat ?

its good seeing this thread still alive .
anyway, been a bit bz .
cant clock my rig atm .

what do i have to play again for 2k ram and 4.2-4.4ghz ?
vCore, vtt, vdimm, other ?

forgot edi >.<"

what bout ioh n ich ?

Thanks met . Left d rig for so long till forgot how to clock

oh my 2k cl6 with 990x >.<"
this proc is better compared to SB right ?

>.<"
what's the clock ppl been reaching with this 990x ? on WC .

4k uncore is only 1.4v .
anyway, im running mine at 4.2ghz 21x200 2k cl8 PSC chipset
vCore damn high 1.4v <--- not optimize yet cause trying to find get the stability first .
vTT 1.45<--- also very high for 4k uncore
vDimm 1.65<--- seems like now only can stabilize the linX .
before this try lower voltage problem .
will optimize again .

anyway, 62gFlops on 4.2ghz HT off 2k cl8 triple channel = good or slightly low ?

and what's d scale on the PSC chipset ram ?
i want to know the voltage scaling for 2k c8, 2.1k c8

is 100 run linx enough for daily usage ?

the new 1155 is better in terms of performance .
better overclocking ability as well .
paired up with superb custom WC and will get best out of it ^^,

erk, 1.425v for 4.4ghz ht off still fail >.<"
still thinking whether to go further or not .

btw, lowering vtt resulting in lower gFlops .
what does it mean ?

scale of 4.2ghz at 2k ram should be around 62gFlops right ?
after lowering vtt, i get 59gFlops only .
what does it mean actually ?

ergh 1.45v vtt in bios 1.43v in windows .
cant lower that thing, else not stable .
does this has anything to do with imc strength or its just diff mobo diff vtt ?

try loosen timing for ram .
try increase tFAW to 24/30

mine set to 24 will make the ram into 4gb .
set tFaw 30 problem solved .

1 thing with 2k dram is that u have to start altering the subtiming a bit .
its not that simple anymore like 1600 or 1866

well, if its meant not to work at 2k then try lower frequency with tighter timing bro .
i even had a hard time trying to stabilize 2k cl9 on my previous hyperX .
with the new dom gt PSC chipset, it's really easy .
i guess its still based on chipset as well .

every component has different efficiency .
doesn't mean same hardware will give u exact same result .
it'll differ in a way or another .
but it's nice to have same hardware cause then u'll have the full guide for doing it .

T_T
got back from final exam just to find out my GC is dead
really sad case .
no xtra GC so now cannot clock T_T
almost reaching 2k c8 already with 4.2ghz .
4.4 too much vCore.

dunno liao .
didnt stress it also die .
normal la its electronic stuff .
it can die anytime it wants .
d GC doesnt indicate any failure , the LED indicator all green but no display and at post also report no GC detected .
tested other PCI-E lane still d same .
so i assume its dead .
waiting for colabear98 hoping he could lend me a GC for awhile to confirm it .

it strikes me now .
hopefully not next time cause i'll be doing my FYP using my GC .
need the CUDA technology offered in NVIDIA

Ahahaha i dunno y .
yeah electronic stuff mostly bout luck only .
if its meant to live, it'll live for the next few years .
else, it can even live for 2 hours only .

ahahaha macam GOOD je .
not that good la .
just to do comparison on linear programming vs parallel programming

sent for RMA just now .
hopefully can get within 2 weeks time .
ergh

waffak !
ZzZz
u buy la not that expensive wat .
now ddr3 ram darn cheap edi
i can ensure 2k can reach