gskill FC ..
still tweaking ..
cpuz

This post has been edited by ray99mond: Jul 17 2005, 11:52 AM


Attached thumbnail(s)

3. kelvin_hata - 8044 PTS - Corsair PC4400 TCCD @ 8-4-4-2.5 @ 1T @ 321 MHZ @ 3.07 VDIMM
4. babyelf - 8002 PTS - Corsair 3200LL 1.1 BH-5 @ 5-2-2-2 @ 1T @ 267 MHZ @ 3.5 VDIMM

321 MHZ @ 8-4-4-2.5 almost similar to 267 MHZ @ 5-2-2-2

that's the power of tight timing..

In AMD64, the clock speed must be concerned in the memory bandwidth too. The faster the clock speed, the higher the memory bandwidth.

Just wanna ask u guys which prog u all use to test the mem stability? I've heard of Memtest86 but when I Google it, there were so many different types of Memtest86! Which 1 shud I download? From www.memtest86.com?

my favorite flavor of Memtest86

OCZ Technology's Memtest86

http://www.ocztechnology.com/displaypage.p...ame=ocz_memtest

Thanks. Will download that then.

no more record breakers ?

no more...cannot go aledi...i also wanna try to break record (my own record lar) oso cannot bcoz mobo kong`ed out aledi...uwaaaaaaaaa

dinster, my gskill is 3.1vdimm and 1T timing .
thx

score : 5108MB/s
CPC : 1T
RAM = 4x512MB corsair CMX512-3200 3-3-3-8 Black
chipset = TCCD 0507
Vdimm applied = 3.2 vdimm
system = amd64 3200+ @ 2.10GHz


http://valid.x86-secret.com/show_oc.php

This post has been edited by Westley: Aug 1 2005, 03:04 AM

Westley, Voodoo 3 PCI?

ya, i can tell you, is true.
not joking...
and i'm using it wif a 21" monitor...

my new score... ... haha just only 1 point ahead of e-jump...huhu

RAM = 2x512mb Kingston ValueRam PC3200
chipset = Hynix DT-D43
Vdimm applied = 2.83 V
1T OR 2T = 1T
system = AMD Atlon 64 3000++ (Winchester)
CPU speed = 2565.5 MHZ

wah..bro..u hav a good mark wit ur dt ya...

boost more lar HTT.....ur rams can take more of it.....but HT stabilisation have to not exceed 1100 otherwise will easily reboot when ur doin test...

btw congrats...


p/s: antonio no more overclocking...will leave the arena soon....

This post has been edited by antonio_zth: Jul 30 2005, 01:40 PM

haha...just follow @ahpaul setting there...hehe ....he managed to squeeze 260fsb on his dt's...

mekasih..... but can only manage to got 259 fsb ja bro...but quite hard to take the screenie...pc oledi restart..uhuk uhuk...

but rzonealley tested this ram can go furthermore 264fsb on his msi k8n platinum...but dunno 1T or 2T...oledi forget....

p/s: hehe.....ur winnie quite 'taiko' la...can boot up to 2.7ghz....takper bro..u've oledi feel the power of the SLI-DR.there's still more things to play...haha.. ...

RAM = 2x512MB Kingston ValueRAM PC3200
chipset = Hynix D43
Vdimm applied = 2.85 V
1T OR 2T = 1T
System = Athlon64 Winchester 3500+
CPU speed = 2800 MHZ

Score = 7447.


Attached thumbnail(s)

RAM = 2x256mb Twinmos SpeedPremium PC3200
chipset = Winbond CH-UTT
Vdimm applied = 3.3 V
1T OR 2T = 1T
system = Athlon XP
CPU speed = 2460 MHZ

Score: 5619
RAM: Kingston Value Ram
Chipset: BT-D43
Vdimm Applied: 2.8V
Timing: 3-4-4-8
Speed: 250Mhz
CPC: 1T
System: P4 2.8C @ 3.5Ghz

hehehehe..to avoid restart.....after print screen lower back lar settings....apa lar lu nie....wakakkaka...btw i did think twice about leaving....but as far as i can see i just cant really stop...after sold my utt rams i was like 'huh....'

now wanna play pentiums....SLI-DR needs time and patient....i got time but not patients....