A64 2800+ socket 754
DFI LPUT nF3 250Gb
ADATA 256MB DDR600 @ 2.5-4-4-8 1T 2,8v

This post has been edited by embuhnator: Jun 2 2005, 06:21 PM


Attached thumbnail(s)

almost 8k already.. i change back to 310 bios later tonight


RAM = 2x512mb Corsair 3200LLv1.1 BH-5
chipset = Winbond BH5 (1st generation)
Vdimm applied = 3.5
1T OR 2T = 1T
system = A64 3500+
CPU speed = 265x11= 2922mhz


Attached thumbnail(s)

push it to 270mhz and u'll break 8k marks

this bios won't let me do that
310 will.. haven't change back yet.. will do so soon

hopefully 310 will let me clock my proc higher as well.. cause i need the 11 multi

din...unofficially i got 69++.....still waiting patiently to get the rams burns...not burn out..burn in...



This post has been edited by antonio_zth: May 30 2005, 07:39 PM

erm... just want to give opinion

isn't that it's kinda unfair S-754 Athlon64 to be compared to S-939 Athlon64, coz the differences in performance of single channel and dual channel Athlon64 is quite obvious

i think the category for amd should be divided to
Socket A (Athlon/Athlon XP/Duron/Sempron)
Socket 754 (Athlon64/Sempron)
Socket 939/940 (Athlon64/Athlon64 FX)

This post has been edited by soulfly: May 30 2005, 12:41 PM

8k? hehe

RAM = 2x512mb Corsair 3200LLv1.1 BH-5
chipset = Winbond BH5 (1st generation)
Vdimm applied = 3.5
1T OR 2T = 1T
system = A64 3500+
CPU speed = 267*11=2937


Attached thumbnail(s)

Vdimm applied = 32.8 <---------------

even if it is 3.28.. i think it's wrong as well..

3.28 V for TCCD...

This post has been edited by dinster: May 31 2005, 01:13 AM

nice idea..

no Sandra screenie + CPU-Z screenie + template = not verified..

err, dinster.. my rig is s754 ler.. anyway, tak brani OC yet becoz my PSU not good..

dun wan lar....the gigabyte mobo wanna sell edi....dun wan to do anything until get the DFI....DFI mari 4.5volts aku sumbat....biar padan muka aku...muahahahhaa...

tapi as i surf the net for info...the actual highest mem bench for 3000+ is around the the 71XX mark....mebbe i've reach the max for my proc....maybe la...any comments...

RAM = 2x256mb Corsair XMS PC3500
chipset = Winbond BH5
Vdimm applied = 3.52v
1T or 2T = 1T
system = Athlon XP-M
CPU speed = 2500 Mhz

ehehhee...salah copy the screenie lar...next time update again....hahahaha... btw ok or not the placement of the fan???

attention Samsung TCCD / TCC5 + DFI NF4 users......

some guide for u.....

http://www.bleedinedge.com/forum/showpost....70&postcount=11

This post has been edited by dinster: Jun 2 2005, 12:29 PM

abang din, plz update ur database although my ranking still same

these idea is not mine..

but it's intended to cool down your Winbond BH6 / BH5 / CH5 / CH6 based RAM at HIGH VOLTAGE

damn that's really BIG.. and must be heavy..

huyoo...damn good n heavy...

the 1st 2 coolers are made by a Japanese..

and the last mem cooler was an idea from a German..