At my hometown Alor Star, my dad's friend shop..

yup.. the price sure is gonna go higher if lots more stuff to replace..
and i want to know to.. where?

Dog bone?

dog bone is rear.. not front...

ive tried to shake the car from the outside.. but cant replicate the problem... i guess when u really compress the thing only it can got sound. wanted to go back to the shop that install it but no time till end of this week.

its driving me nuts

This post has been edited by WhitE LighteR: Oct 11 2010, 04:53 PM

Aloq Staq ka..awat jauh na?

Want to ask some questions.. What air filter are you guys using? High flow? Which brand?

K&N, RM240

UTR high flow steel mesh, RM180

UTR metal flow open pod...

This type of sounds really annoys me.. I know your feeling..

i suspect it was the sound of the spring rubbing against the plate when going over uneven road / bump.
check all of the abs' bolt nut; including top mounting if it was properly tightened. usage of slightly incompatible bolt nut
will caused it to produce the sound after a few days too.

I wonder if a little WD40 will do the trick

Top mount bolt was one of the thing i checked... i shake the car n look for the sign the bolt moving...

i think the spring rub wit the top hat..

This post has been edited by WhitE LighteR: Oct 11 2010, 07:42 PM

wd40 might loosened the thing..jk
last time a friend's car having the same problem, i help her to jack up the affected front area, find a compatible spanner/s and tightened the big bolt nut in the middle, followed by the other 3 and the sound gone.
btw, if you tightened the bolt nut while the car is not jack up , it won'y work. this is due to the weight it has to support.

great info

in fact, while doing it, the bolt nut only tightened a little'(with a short thack! sound).... about 45 degree or so but the sound completely gone.

oh wait.. i nvr look at the middle bolt

u must hav use a damn big spannar since u need laverage to turn it....

you need to open up the rubber cover for the big bolt nut.
lolz...too much of laverage or drill will only kill / loosened the top part of the absorber screw. it's the correct technique that matter.
am using standard size spanner. will foldable( to L shape) one end. bought from ace hardware at 9.90 bucks .
one hand pressing the top part that hooked up to the bolt nut and another hand tightening. a slight thick! or thud! sound that's all.
once you jack up the car, it will be different feel. not as hard
btw, am into fitness as well, so, this is just part of arm workout

let me try wit the tool i hav first...

Campro Radiator what is the capacity?

Wah after i service my aircon for the first time, so cold and the smell fresh..
I ask that uncle he say recommended every 30k km service once..

how did they service.. wat did trhey clean
How about the RM