How much the total? Lazy to count all..hehe
Then ur engine is campro or mitsu?

u quote wrong ppl liao

that's a mitsu engine coz it has two fan belts.

Well, how do they recon an engine head? I'd say that the current head cracked after sending for water test at machine shop.

As for the workmanship, thats too cheap if the piston rings are replaced.

Did the mech take the whole engine down, or just took off the head?

The mec did a right thing by checking and replacing all parts esp the rubber hoses as most mech tend to leave them out.... but did he get your permission on replacing the lower arms, brake pads, and other undercarriage bushes?

---

Added on October 5, 2010, 10:22 pmthe shop did make some money on the parts judging by the price of the spark plugs.

Overall, looking on what has been changed, you are not likely to face anymore problems and should have a super smooth undercarriage especially when you go over speed bumps .

---

Added on October 5, 2010, 10:22 pmthe mechanic would ask you to go back to him after 500 or 1000km for an oil change. If he didnt ask you to do so, then keep in mind that the conrod bearings and piston rings were never replaced

---

Added on October 5, 2010, 10:23 pmall in all, you were never chopped, unless you never gave the green light on repairing the undercarriage

This post has been edited by ThunderGod_Cid: Oct 5 2010, 10:23 PM

+1 on bolded text

btw, the spark plug price are just ok if it is a platinum spark plug.
The rotar skimming is a lil pricey though i guess

its ok la since they charge 35 per side and no labour to take it off

thx for the feedbacks.. well i did asked them about the kluk kluk sound (metal banging) that came from front passenger wheel.. where they told me a new lower arm is required..

oh ya .. the engine head according to the mech they say the water pump burnt the engine head... so had to change.. for new head = 1200 ..

how did the water pump burn the head =.=

did the the "kluk kluk" sound disappear after changing the lower arm? it may also be the stabaliser link broken, at least that is what cause to me

poison especially for jerry. http://forum.lowyat.net/topic/1589020

If not correct. 1 Count all ur bill is about RM4475

how that water burn ur engine..............................?
confuse la..

R u Overheated ur Engine
Coz last time wa kena gak.......
Enjin Overheated.. kena RM1800.. sat cari bil.. hehehhe

seriously tht looks larger then our stock rear brake. I duno why Ali say its the same

This post has been edited by WhitE LighteR: Oct 6 2010, 09:54 AM

HELPING HANDs

Tolong Sket
Malam Tadi Abang Member Hilang Proton Waja
sudah Report Polis Mutiara Damansara
warna Waja GOLD KEMASAN Kuning
(code * star silver)
WMB 8530

Bmoh Sudah Tgk ada kat
workshop tanpa nama
Jalan Batang Kali
Dekat2 dengan Bank Rakyat@ Bank Islam
Within 1 Kilometer radius

0195766237-En Daniel

wah.. bomoh

go bank rakyat look at workshops around leh

ada no Bank Rakyat area situ
Thank.. imform kat orner dah...
TQ.. try nak goegle up la kat situ

ko lewat mlm ni free nak threebond? 012-9096996.
bleh reflash gak

Belom boleh lagi kot
RM aku dah kurang sebab Pertukaran alatganti total out RM399 tu
tgh tunggu payment kerja 2 kecil..

Reflash mungkin tak mampu threebond boleh gak aku usahakan RMnya hehheh

if am not mistaken, this one should be of 265mm disc of earlier evo twinpot.
but still need 16" wheels to clear the caliper.

sent my car to PRS, seri kembangan to service my shocks. RM540 for rear

guys, is it normal that the acceleration pedal vibrates especially at high speed like 130km/h?