Sorry for you, bro. What's a new lung? Air intake? You using workshop car right now, ar?

---

Added on September 24, 2010, 11:14 amYeelin04, not really sure about your problem. Maybe it's a sensor problem? At your next service complain to SC lar. Ask them to check.

This post has been edited by +Newbie+: Sep 24 2010, 11:14 AM

yeelin04
check battery.

Finally the common problem started to plague my BLM after a year of usage.

The rat noise from the alternator bearing during cold start. Started to happen since this Monday, after i went back hometown from JB-Ipoh-JB total 1100km journey on Saturday-Sunday. Before this i'm sure didn't have these noise.

Actually i'm not worry since the noise will dissappear after 2 minutes. just I feel Campro in terms of durability is not so satisfying, because everytime i will found new problem after such long run.

1st my IAFM started to give noise during cold start right after the same journey on last June, now the bearing/bell. I didn't speeding at highway one, 99% maintain at 3.4k rpm @ 105km/h. I still suspect the short gear ratio has lead to unnecessary heavy work for the engine during long distance cruising will finally bring disaster to the engine in one day.

But luckily the FC are still same as new car, at that speed managed to get 16km/L @ 6.1L/100km.

I really think Saga is not suitable for long distance journey, how you guys think?

Anyway, tmr or Sunday probably i will go to sound proof my car, flooring 1st, quoted RM1.3k.

This post has been edited by coolkwc: Sep 24 2010, 02:13 PM

Where are you going for the sound proofing?
What kind of material?

Hi...can i know what is the pcd offset for saga blm?

thanks...

Famous Audio @ Tmn Impian Emas, Johor.

The material is STP bitoplast, RM80 per piece, roughly need 12 pieces for flooring purpose. Workmenship 250, after sound dampening, need to add sound insulator, need 2~3 pieces, 140-200.

sorry i mean new heart...

This post has been edited by xshiro: Sep 24 2010, 04:27 PM

nowdays half cut campro how much?

dunno last time 3-4k can get ady..now maybe only engine lantai can get with that price

This post has been edited by xshiro: Sep 24 2010, 04:43 PM

I think u better get back campro engine. U no need modify ur mounting or other stuff. Plug and play

what car you are driving bro...

me is BLM big brother....

Search for Campro CPS?

Brought to proton edar today at KL.

Firstly tell me key transponder spoiled. Changed, still can't start. Then tell me settings wrong, reset still no avail. Fock now tell me ECU unit might be spoil wtf man. Need a major check up and can't even take car today. Even told me not sure cover by warranty or not, worst the mechanic keep asking me did I do any personal alterations to the car

Proton, seriously once is enough.

guys, my mileage is nearing the 20K km, refering to proton service is around 400++,
so if send service to under pokok cherry workshop what warranty will void?
anyone knows?

how far oni consider long distance??=x

Sifus , please help me on detecting the pics below, which part they are supposed to be ? i can only tell myself that its from the bottom car.

jus nw i was washing my car and outta sudden heard this sound "tingting" something fell on the ground and i picked it up and uploaded it here. Thanks.

Image might takes a few secs to load . file size kinda big

sounds like ur right. but what would hppn if i choose not to do anything bout it as in replacing a new one ? will my exhaust pipe falls off

better do the firewall part ...

Im Looking to get a SAGA SE Red Colour AT, Anyone knoe where can i get full loan for it ? around old klang road ?