no dare to mod vdimm but dare to mod L12 ?

well xcrue.. which L12 mod you want? The soft mod L12 or the wire mod L12.. most of tictac's modded bios are L12 soft mod embedded.. except for the D27 modded bios which required the wire mod... just be vewy-vewy carefull when doing the wire mod eventhough it's look easy.

how to do the wire mod???

Just a quickie... I notice a sudden drop in sandra's scores when using modded bios (D26 and D27), has anyone experieced this or my mobo goneded ledy

@ amok

which mod. bios you tried ? normally tictac's bios give lower momery bandwidth than merlin's one. have you try tictac's d27 fire 3D ? I cant get fsb over 230mhz....

normally the soft L12 are not as good as the wire trick L12 i use to remove the L12 Wire trick to prove it..... and i got stable at 240Mhz only.... can't go 250+ stable without that wire trick...

my nf7 cant go more than 220fsb without modding...

need some advise on wire trick guys

vyvy noob question here...

NF7-S2 can change multiplier , voltage ?

Well it was both the D26 Mantaray's and D27 3D fire's bios by Tictacs.. my max fsb is 245 (with L12 wire mod of course) but i've got some temp issue which causes instability when priming.

i think do the wiremod yet.ahah..scare risky

sound like wire trick can give extra fsb, going to mod soon

using mantaray xt d26. want to ask about l12 soft mod. is it enabled automatically? how to set it to 166 or 200? i use athlon xpm 2600+ 133fsb. want to set 200fsb default.

if 200 fsb u can set at bios...

if u wanna do l12 wiremod u can refer to previous post by amok..

@ amok

one question here, i wonder how you connect the wire for the L12 mod? going to mod soon but no idea about it

u got the pics rite ? i suggest better use tictac's for more stability juz use a very very small piece of wire from fan's wire there... lol .... very small to fit in rite ? handle it with care good luck~

my hardwired L12 mod


Attached thumbnail(s)

thanks for sharing,
btw,yours mod is based on tictac's way?

got 1 more question, just put the wire inside without coiling become a circle?

This post has been edited by gsan: Jun 25 2005, 01:42 PM

just want to ask how to check my bios version for NF7..?thanks

hey sifu,

cannot fit with my proc at all after i putting the wire.... cannot find a very very very thin wire la...

This post has been edited by gsan: Jun 25 2005, 08:59 PM

NF7 masters:

can I also just slightly put some sloder on the pins of the CPU instead of the socket?