just run the software and select the drive you want to recover.. any software will do cause your problem is actually quite simple to solve..

I'm using a WD 80GB hd. I used PartitionMagic to create a new partition but instead created 2 accidentally. So I tried to merge both the 2 new partitons into a single partition but it fails.

Now, my old partiton becomes inactive and hidden. After toying around with a couple of times of merging and creating new partitions, even PartitionMagic could not load now. It states that the partition table could not be loaded. Any idea on what actually went wrong or how to solve this problem ?

Snapshot of my storage management console



This post has been edited by lex: Feb 12 2006, 06:20 PM

like above... try running the data recovery software... the whole table is lost, file locations are lost, got a chance that maybe some percentage of your files will be lost unless you do a raw recovery..

Is this R-studio DOS or Windows based ? Am trying to look for a DOS based one that can access and remove dynamic disks

This post has been edited by lex: Feb 12 2006, 06:21 PM

running recovery...in progress now...shall update youguys on the outcome!

finger crossed!

Use Knoppix LiveCD and run QtParted to fix the partition table. RTFM on howtos and good luck!

good.managed to reclaim back all the photos in my drive..somephotos i think its being resized...not sure..have to ask the owner. I'll try on some audio and video files and see if there are any issues.

Restoring 1800++ files took only 1-2 hours. Vid and audio i believe will take ages. The restoring rate is somewhere between 300-400KB per second. Well depends on your pc spec i believe.

Cheers.


This post has been edited by lex: Feb 12 2006, 06:21 PM

Works on Dynamic disk ? without booting into Windows 2000/XP ?

This post has been edited by lex: Feb 12 2006, 06:22 PM

i've recovered somefiles...but right after i restart my pc...i got some DNS problem..my network completion out and i couldnt connect to the net!

hi all,

can any body help me. i think i have a weird problem. i'm trying to install P2P software call DC++. then after install that software required to do "hashing" in my hard disk in order to share my file. the problem is when hashing process still running ( about 60 % ), i had restart my pc. this is because it take to long to do that job and i could not wait. after restart PC my hard disk cannot be read. i had try to use maxtor tools download from internet to recover even use minimal format also my hard disk failed. so anybody sifoo that can help me on this matter. my hard disk is maxtor diamond 40 Gb ATA/133 HDD. thanks any way.

can give us again the full name of the software kah?

This post has been edited by lex: Feb 12 2006, 06:23 PM

I use the stellar software in the window base

On????k....

Good day,
Anyone know the way to recover the inside the SATA RAID??
Thank you and good day..

i mean the sw u use to recover from ur hdd disaster previously lah.

This post has been edited by lex: Feb 12 2006, 06:10 PM

cheenjeat: thanx

anyway, here's my share of stoopid maxtor drive

yes, i have a maxtor drive. it's an 80gb HDD that is used as a tertiary drive, seldom accessed, keeps all my manga (about 80% full) and suddenly, one fine farking day, the hdd master file table just got corrupted

that was 2 months ago. lucky that i was soooo lazy to re-format everything. i got the chance to recover 100.00% of my files, INTACT, and with ease in less than 2 hours (that's about 250,000+ individual files, mind you)

what software u say? it's none other than the full version STELLAR PHOENIX FAT & NTFS recovery software. works like a charm i tell you. however, ur gonna need another different hdd to store all recovered files (in my case, i have 3 different hdds)

This post has been edited by lex: Feb 12 2006, 06:10 PM

Good day to Lucifah...
Is good to hear that you have recover all your file with the powerful software..

u both using the same version?

This post has been edited by lex: Feb 12 2006, 06:11 PM

hi guys..this is the worst situtation thread we dun want to join in the whole LYN area.

btw, i had become one of the victim now. So BLoodyful lucky.

I got a 2.5HDD cannot access anymore. It is not the Enclosure problem. CUz i did tried wif another good condition 2.5 HDD.

then, i followed u guys getting the Stellar. I still cannot accesed the SPoilt 2.5HDD.

So, how am i supposed to "detect" my Spoilt 2.5HDD wif Stellar?
Connect into CPU? But the Pin socket is not match btwn 3.5 wif 2.5.

thx for advicing approachment~

Most data recovery software works properly with internal IDE interface, and do not usually work with external USB and/or Firewire drives.

Refer to your thread here: Seagate EXT 2.5 HDD no Respond anymore~, Due to UN-Safety remove too many times. You can buy a 2.5 to 3.5 IDE adaptor to use it as an internal IDE drive on your desktop PC.

Yeah dude.. Its my turn to be the victim today!

I dunno why, after doing some maintenance inside my casing, the ckhdsk blue screen is taking place everytime I boot up my pc at my E: drive

[ I have 2 160GB WD SATAII drives. 1 (2 partition, around 79GB each drive C and E) and the other 1 is 4 partition (39GB each) drive D,F,G,H ] - My WINDOWS file is in D drive..

However, Drive C is UNREADABLE and after being fully formatted in Windows, this error message appear.



I lost ALL my videoclips in that drive, and I tried to recover it using File Scavenger.



Question:
1. Is my drive corrupt?
2. How about warranty, is this problem covered?

Thanks for any help!

This post has been edited by lex: Feb 12 2006, 06:12 PM

wow.. lots of HIM video clips... i like HIM

p/s i'm not gay, HIM is a rock group