a quick question..

is 2.1vdimm is safe for a mobo with poor ram phase built?
1phase with 2mosfets i guess..

edit: if no cooling solution at all.. just depends on bare passive cooling (just asking for the worse case)


This post has been edited by kuntawakaw: Aug 16 2010, 12:57 AM

both not correct..

if u set vcore 1.30v.. sometimes the bios will not supply the correct amount.. lets take 1.28v as example..
and cpuz will detect the same as the bios detect.. if bios detect 1.28v..then cpuz will be the same.
(bios detect the vcore is not where u set the vcore.. u can find in the Hardware control or whatsoever, the place to set the fan speed mode)

but.. the circuit is not perfect.. so if u check with multimeter, it might differ..

3 diff values..
1- amount u set
2- amount delivured
3-exact amount delivured detect by multimeter..

so..rely on the cpuz instead.. easy..
not the value u set..

yeah..indeed..i not telling u was wrong..just the value stated in CPUZ is wrong (or to be more precise, inaccurate)
sorry for the misunderstanding

change mobo..
but unable to boot..stuck afer post.. at " AMD DMI Pool change.....success" award bios
i check at bios.. seems it detect my HDD..
but turn ahci mode, "no device detected"

anyone?

This post has been edited by kuntawakaw: Aug 17 2010, 10:12 AM

no la..not giga..
old skool mobo with ddr2..
1st i run with native IDE... stuck..
2nd i run with ACHI.. no device detected..
3rd i run HDD-less... and shows no device to boot.. press enter to retry like that..

both 1st and 2nd attempt the bios detected my HDD with exact model..

i think the HDD is dying la.. since last night was OCing and restarted several times

HDD is the 1st to boot..
and the only HDD connected..so it will be the 1st priority..

nvm..will post this question at technical support then...this is absolutely off topic

aiya..not amoi..it edward lol

btw since u the former user of this board..mybe u can help... and ah khoo too..and xixo too..

dfi 790fxb m2rsh..is there any setting i missed out?

2 sata cables tested..3 hdd tested..
both sata HDD is with win7.. IDE with XP..
IDE HDD working Sata wont..

btw the seller told me that is must be the setting..that is y i ask here since there are few experienced user..

---

Added on August 17, 2010, 12:04 pmculprit found in the very old thread u posted ah khoo....
http://forum.lowyat.net/topic/959800/+20
booted..

This post has been edited by kuntawakaw: Aug 17 2010, 12:04 PM

i lambat 2tahun dari u all.. when 7series reduced to death, i baru nk start guna

huhu.. tonnes of setting been experimented..at last ur post saved me

yeah... btw this mobo working fine till now.. will start belek2 tonight.. now dont have much time..
(night temp lower.. so i like prime all night long )
btw happy birthday bro..ur birthday bring luck to me

---

Added on August 17, 2010, 1:44 pmbtw sis verdict..thanks for ur concern.. i found the prob edi.. not related to OC yet tho..

btw sb 1.8v eh? not 1.2 ke default?

This post has been edited by kuntawakaw: Aug 17 2010, 01:53 PM

orang suda xpakai saya baru sebok mau pakai la
kekeke

will test out soon.. because of ur words years ago saying DFI bestest, i bought this..if not..i might wait few more weeks to grab 880 evo..
but i have prob with my proc.. processor model unknown and i believe this is the latest bios d.. might have hard time OC with this proc..

i thought u directed me to put 1.8v.. huhuuh.. if then, there goes my mobo

wah..u also pandai poison like unker ah khoo eh

if im about to change proc.. that will mean thuban..but now no mobo can support thuban with me..old mobo with no newer bios revision..
i dont need anything beyond 2cores..but might need better IMC..
so for now will settle with this proc only..see how it goes..

ha.. one more thing..since u still using the same mobo..what is the "HTT gab XX" cant really remember the term..right below the option to change HTT
it default at 5..

This post has been edited by kuntawakaw: Aug 18 2010, 07:27 AM

no..was asking u what is that.. i stated the default value to make sure u and i talking about the same thing..

u try adjust the value?What will hppen eh? i dont have much time to play last night.. felt sick.

are u talking about 16↑ 16↓ on HT link width unker?
that is not it..

iinm it is HTT adjust gab.. the value can be put is up to 255.. and i dont even know what is that..nvm.. 2nights dont have time to tweak.. sleep early...
hope today im free abit.

---

Added on August 19, 2010, 6:43 amowh...thanks.. yah.. sorry for the spoon feeding..
it works on phenom.. i guess its phenomI.. but still i use no phenom..will not effect me tho..thanks

This post has been edited by kuntawakaw: Aug 19 2010, 06:43 AM

wow...
rempit's module eh? saw bike picture over there..

so far how much u able to push cloudnwan? cl7..
this module really dont like high volt ke? does it perform bad with higher volt? i dont think i see some high volt attempt from u

mem tweaking is veli2 convenient bro...
its either worker fail (if only large test) or unable to boot..seldom restart2.. (but might differ btween u and me tho)

no need backup benching HDD..

or else dont plug in the HDD.. memtest +86.. so go OC those module now!!kkekeke

now im stuck with d9 that not really a volt lover.. he loves volt sket2 je..keke

2.0 is too much to ask.. at least 1.8vdimm ka.. since we all sked2.. not going insane like sir antonio..i belive 1.8-1.85 is absolutely safe volt.

utan now still panas.. keke..

dfi fxb m2rsh anyone?
im not really done playing..but i consider done..only can gain 50mhz more .. just the bios is rich in ram subtiming..i rike
might be using this crap proc hinder the true potential..

no..i need no other proc except thuban.. if no thuban, it will be regor only..keke
i dont play with CPU oc much unker.. since i think i already know the potential,either by reading or keep using same proc for long time..
just OC with stock vcore and see how far..
thinking to let go this mobo la..financial problem...

2nd hand i dont know since i dont even think to buy it.. i own unlock regors..the prev statement means that if not thuban, i wont change...
i still carik2 fund to back to ddr3..that is y i not planning to sell of the team elite..once i sell them, even hard for me to back to ddr3..
and also i dont need a high end mobo that can run my proc at high clock,able to withstand high volt since i dont even clock my proc high. mybe will, but only last max 1 day..
it will be a waste of money..
plus 1 only need a ok ok mobo that have IGP for daily use..

asus premium eh? will be a dream unker..
evo perhaps.. CIVF.. never..

high end - the highest of its product line.. kekekeke.. price might vary..
yeah... still decent board still no need for daily usage..normal with IGP board enough..
i guess i have to separate my daily use PC and gatal2 tangan PC..

im not old yet..but now i not playing any games, do any stressful task that need superfast PC..so even p4 enough for me i guess..