what the vcore there? sometimes the "Auto" will messed up the vcore..depends on board..
btw u shud know tx3 is not good enough..another solution..undervolt.. i think reduce 0.05v is not a problem..

u did try copy ah khoo's setting? include subtiming..
higher divider no good also bro?

hey2 sifu..
if there such thing that proc dont like certain multi?
i thought intel only got.. i just realize it now..

ram i knew.some ram/mobo/both combo not like some divider.. .
but CPU multi kindda new to me.. i just encounterd once.. 5 min reboot in 13.5x but 1hr prime stable in 13x..
huge stability different..

anyway..thanks sis.. update result of ur ram faster..

ok..got it..
last time (years ago) xixo did said.. dont use .5x multi..but his reason is superpi giving worse score with that.. not saying about stability..

btw..thanks sis.. lub u

id say that a hell of different...
at least CL9 is ok.. really2 rare for ppl to set CL11 @1600mhz..

@cludwan..

go go go!
(just change the "8tvt" to "cloudwan" and u good to go )

This post has been edited by kuntawakaw: Aug 21 2010, 09:35 PM

may i know how that ram perform with that board?
ur eco and evo..

worker fail is very nice la unker.. ram tweaking hardly restart.. after worker fail, can use win based software to tweak.. no need restart2..keke..can prolong HDD life also

btw..to avoid 1 line spam..

seems like the ram react well with low divider..
pls note this is a 667mhz ram..

oic..what a waste

is bro eh? i tot is sis since he/she always use girlish avatar..

btw..my lowly ram able to meet my lowly expectation
caution..low OC result below.. nothing impressive..

but want to ask.ah khoo or xixo or anyone else.. max read latency, u guys normally put how much? since the number auto change is quite a lot.. sometimes 69, sometimes down to 5X.. depends on setting..
change abit (~5) not result stability issue..

trfc normally 110ns.. if me, i will only put 160ns to gain high freq only..

keke..
might need to check with AOD also sis..encounter this few times.. but i trust AOD/cpu tweak more..
reason is because when leave like that (bios 110ns / cpu tweaker 160ns) prime stable..
change cpu tweaker to 110ns, prime fail..

kate nk kalahkan dura ace.. make it 3.6 and pi 32m la..want to know also the figure...

auuu.. rugi bro..
last time i manage to get 1600mhz 8-7-7 je..my hand limit that


somehow i manage to tighten quite alot..
but... 812mhz 5-5-5-15-18 fail
donno y.. need to stay only at this speed..just play with timing..

kekekek.. not to mention tend to fail more compared to 1m..
if fail at loop 1 i can tolerate..if loop 23? kekeek

agreededed..kekek

and am3 chip is physically fit into am2 mobo.. just i dont think mobo manufacturer want to make it support am3 chip..
but to have am3+ socket that able to work with older proc is just fine.. not totally have to overhaul the PC..at least able to salvage the main brain,and change bulldozer later after. for those that low in budget la..if like cloudwan, throw away thuban straight away angkut bulldozer..

btw

btw..im happy this able to boot..

got rumor ke 32nm?
eleh.. u, even last time x4 not fully utilize jump to 6cores also..
and i believe most ppl here is enough with 2cores..but.... itu sume nafsu
i have no passion like u cloudwan.so kenot..hold that torch urself.kekeke. also no money..kekeke

erk..why my post messed up?
i was replying to nicholas0507 and just realize it was gone
@nicholas0507
no.that is not kvr.. ss belos is kvr.. cant go further since not react well with high dvider..
max...i mean low freq tight timing i can go..


This post has been edited by kuntawakaw: Aug 25 2010, 11:14 PM

tu la..great board..i saw also.. but dont care..
have only 320 cash..kekeke..

btw shinjite.. ur ram is ocz reaper right? mind posting CPUZ + cpu tweaker with subtiming SS?

u call my name short.. quite weird
hi shinji..kekeke (i think the meaning is believe in japan)

ok2..thanks.. btw u have any problem with what ram divider eh? mind to tell me? or no prob at all?

im facing a prob with 800 and 667 divider..
1066 divder works well..but since my proc is not a BE, the NB freq will only at low freq.. nvm.. try to solve this prob later..
just notice from or siggy my ram also not same as urs.. i tot urs is 2gb kit.. kekeke..

i dont think the chip inside the same.. but bengang betol cuz 800 divider cant be used.. is either 1066 or 533..400 will be toooo low

aiya bro..kenot la..fx500 dont have ddr3 imc

This post has been edited by kuntawakaw: Aug 26 2010, 05:07 PM

yeah..normal..
stock cooler and hyper 212+ got huge diff yo..

and trust me, my system prime @ <40c

kekeke.. ofkos not ur proc..and ofkos not high vcore..

just to say that cooler is quite good considering the price offered..

mine is regor.. 2core with no l3 cache..sure very cool....using cooler master 212+

here.. tmpin1 is the cpu temp..
i donno kvr on elpida can do that high..suicide run or stable run sis? vdimm?