ok..jayacom 380..might able to bargain to 370.... seems nais la..

wooot??!!! x8 PCIE..running quadfire ka bro?kekeke (i dont think u to do simple mistake like salah pasang/need reattach or wrong bios config)
what kit u have there? 2200mhz cl7 eh..i wonder what kit.. let see how it perform under pro hand

if want to test the temp..try IBT i guess..
so long havnt use IBT.... maybe i have to try it...with my stock cooler

yeah true not intel chip..but this software also can find error for amd chip..just not that precise..

on my past exp (when i use alot of IBT since lazy to wait) sometimes IBT able to detect the prob way faster compared to P95..
but also sometimes, it unable to detect any bur p95 can..

about the temp.. im think it will make chip hotter than p95 esp when set to use more mem..nvm..will run an exp later to see..

im agree with u about the stressing part.. and overall p95 is the best.. since IBT have some uncertainties (sometimes can detect error sometimes cant)
that is y now i also using prime..but about the temp.. 275secs of IBT beats 17mins of small prime (im checking the max temp only).. even after every calculation of IBT, the temp goes down (means not 100% stress) still it can beats 1c for a short period of time..
on my system la.. donno other system..

alah..biar la..ini small matter..just suggesting the shinjite to check the max temp..not to check the stability on the 1st place.. jgn mara unker

kita berbeda

last time i only orthos for 5min.. kekeke..but not for perfect stability.. just to make it fast to reach the wall.. after reach wall with 5mins, so will reduce freq to make it prime stable..

now only prime for long hours..

fast not ensure stability..real helpful if u still process of finding the max/wall..

intel burn test.. google it..
if normal stress.. usually i make it around 10loop.. if max stress..means use alot of Ram, only 5loop..
depends on u la..

just a reminder.. system might pass IBT but not sure will pas Prime..

yeah.. but 1 weakness..unable to stress either ram or CPU..all stressed at once.. i think la..since no option to change..if isolate wont be a prob la..

btw..correct me if im wrong then..

aiya..melepas!!
cloudwan.. i just came back from temerloh..u temerloh isnt it?

sorry sis verdict.. i had few things to do.. went up to perlis.. and to pahang.. so just read ur msg.. and i sedih lo xdpt pigi..

@8tvt
sempron 140 and any other 800 board.. serious budget...unlock..budget with performance...

This post has been edited by kuntawakaw: Jul 31 2010, 11:53 PM

yeah..u have point there..

believe me.. take ah khoo's advice if u want to use that board for a long time..
ask selferino for the exp of OCing the mobo with 955BE/965BE..kekeke

not all..but during the OCing process, normally ppl turn it off..

so do i..but after finalize to daily usage OC, i turn it on..

short circuit wont make the mobo burn i think..since i encounter many many times of short circuit..
just the PC wont able to start for few secs..need to off the power 1st.. PSU thingy..not mobo..

imma cheapo man.. connect fan to mobo also dont have those 3pin connector..direct selotape to the pins

btw abg otromen..the remaining money been deposited..check ur PM

+ superpi is a single threaded prog..
unless hyperpi la..kekeke
ofkos it will pass..

may i know the prob stated? rounding less then XX or FTT blablabla?

vdimm pls..
how about slightly lower then 1600mhz sis?
that is 2gb kit..dont disappoint me..kekekeke

btw..done revert back to ddr2..
im retiring di usia muda..kekeke

id say..go for more.. 2.5ghz is not sufficient these days..
i never play with phenomI before so i really dont know..but i think there still few rooms to go ahead..but ofkos with vcore add..

and i rike yui too

occt or prime doesnt matter..but ppl here rike prime95 more..
what mobo? bios sucks or the mobo itself?
if oldskool cheap mobo..better dont increase vcore and prime..
cheap like having extra large mosfets.. using coil choke (That the coil is visible) and extra large caps..
sked will die during prime..kekeke

edit: owh fogot...yeah..yui FTW..but maki-chan FTW more..kekeke

This post has been edited by kuntawakaw: Aug 6 2010, 07:31 PM

@saturn.
the 1st pic is the older one..
the 2nd is the improved one..s
and now all choke seems like a cube only.. and i donno if there still coil inside..

no la
he dont mean about normal task manager..

here u go.. i guess..
the logo reminds me of procmon..so i googled some for u
http://www.howtogeek.com/howto/windows-vis...lorer-in-vista/

that HW is not vcore..its vin1.and with my giga, vin1 is the vdimm..
with this biostar..its vSB..

so most probably this vin1 is vdimm..
and thuban TS..not deneb..still both loves cool

woot..
warm up already this much..
u aim how much unker?

aik..i tot cloudwan will buy team dark..
settled with geil ek..

wait..must ask what cooling and what mobo 1st..
later mobo goes to RMA...sape nk tanggung .. if run short period myb ok..if long hours? kekekeke

@shahriranuar
what mobo.. if mobo good enough..run prime fore 1hr or 2..