Update, 49c maximum after 1 hour of priming (guess its enough ler, lazy adi )
But avg 43-46c depending on which FFT it is calculating
Idle around 29-30c in aircond room, non aircond around 34-36c

So without aircond should be estimated 53c max, need to add another fan for the radiator. Currently using 1 fan only

This post has been edited by shinjite: Jul 29 2010, 04:44 AM

Found out that priming FFTs at 8k uses more power hence higher CPU temps

Currently priming small FFTs without aircond, 8k can go up to 55c max, next 1 at 10k, dropped to 51c load. Improvement indeed a lot
Air cooling around 58-62c

Now I think back, no need to prime so long ler
1 day me not gonna use the CPU for like more than 3 hours?

HAHAHAA.....as long don't crash on me can adi
OCZ's running at DDR1000 with 5-4-4-10-19-2T at 2V
So far no problems

Maybe I will try 4-4-4-10 for the lulz tonight

This post has been edited by shinjite: Jul 29 2010, 02:27 PM

OCZ, 1066 (533) at 2.1v is 5-5-5-15-24-2T

Bro, its DDR2, not DDR3 XD

if DDR3 hit 2.1v, dah lama habis lol

Asalkan ada cooling should be good to try
Precaution taken first, better than none

Your mobo overvolting on load....same like mine just that your overvolting is more extreme than mine

Can OC more for sure but fear the mosfets can't take the beating

Amoda 7th floor....I remembered because I RMAed my Crucial Ballistix Tracer RAMs 1 month plus ago

If you didn't buy the RAMs from them, you have to pay for the freight charges of RM50
Not only Crucial RAMs but I did RMA my KHX DDR1 RAMs and my old Abit IS7-E mobo there be4 too years ago

This post has been edited by shinjite: Aug 3 2010, 11:48 AM

Damn, I came across the time that I hate the most during OC~~
Previously can prime error free no problems, now with the same settings for RAM, error at 56 minutes at Core 1....haih

This post has been edited by shinjite: Aug 4 2010, 11:22 AM

Well, don't care ler.....lol
As long as during load no BSOD or instant crash is good enough for me hahaha

Mine is at OC state....oh well, probably I know whats the problem
Go back and try again.....hahaha

The thing is processor nothing wrong, only when I prime with custom settings for RAM then error. Custom settings for proc no error ~_~

Like example: Vcore full load at 1.46V, processor no problems, passed 1 hour nicely, RAM error (NB at 1.2v and VDIMM at 2.0v). Then I upped the voltage, full load at 1.47V, RAM error again, then to my same settings as last time 1.48V load also RAM error at Core 1. Lastly I haven't try at 2.1v VDIMM. Go back and try later

This post has been edited by shinjite: Aug 4 2010, 01:43 PM

I am using prime95

ASUS M4A88TD-V EVO

Or any good mid range mobo with 8+2 Phase

Nope, they won't state

Can't really say but the custom test that I did was focusing on the memory
I'll go back and tweak somemore and see how it goes haha

ASUS would be the M4A89GTD which uses the 890GX (RM600) from Czone