damn, now I dunno why, my core 0 still will fail instantly when run small ffts, blend, and large ffts. Last time no problems

Can't do anything, voltage increase won't cut it, increase NB also won't cut it. What went wrong also I don't know...haihzz...
Currently running on stock, no problems ~_~

RAMs are okay~~
DDR1000 at 2.1v only, its cool to the touch

adng but can pass Super PI 32MB on all 4 cores flawlessly
prime95 + occt fail ~_~ core 0

Oh I use Hyper PI passed all 4 cores for 32MB
Yeah maybe I should go for a better processor already

Hey come to think of it, its an X2 unlocked to a quaddie
1 of the 2 cores or both will have problems sooner or later, it so happens right now hahahaa

Yup, confirmed
Now running in dual core mode, no problems priming whatsoever at same settings

Probably need to use way higher Vcore

This post has been edited by shinjite: Aug 5 2010, 02:15 AM

Yours even on stock also got error.....even worse
Did you try priming back at dual core?

Anyway, there is always option B, just don't bother as long as it doesn't crash or BSOD on you while you are gaming and etc
AMD disabled the cores for a reason

Found out something today
I went back to stock 2.2Ghz quad core and ran small ffts test
No errors at all, but I found 1 thing that justifies the prime error that keeps popping out recently

After stopping the tests, I found out that Core 0 (which always fails) is actually slower by 10 tests (6x compared to the other 3 cores at 7x tests) <---Oh My.....

Yeah the weaker core among the lot
And found out something too.....custom blend test, all 4 cores ran superbly for 1 hour 6 minutes (33 tests)
Blend ok, small ffts Core 0 slow....weird

Oh well, don't bother much haha

Yup, you can set it to 3 cores as well~~
In BIOS for my MSI, under Cell menu>Core control>enable/disable

Should have no problems

4Ghz range it depends on your skills already hahaha

790FX still consider premium....RM400 is impossible unless its used (got chance)

G Skill RIPJAWS?? Awesome!!!

Gaaahhh....guess must venture into DDR3 as well hahhaha
DDR2 can't quite cut it already

Hentam terus 890FX

Whats the voltages did u use?

1.58V is very high indeed for AMD
You using water cooling kit?

Run prime95 and see whether it fails at stock speeds or not

X6 1055T 4.3Ghz is sweet already