UPS dont understand bro can tell me step by step.If got SC better for me.

Thx bro already update new bios version.

aku dah cube OC proc aku

cpu speed 3.9ghz with 1.5vcore

and temp aku plak arround 70 - 80 'c max , 30 minute test AMD overdrive
proc aku C2 ,

ada harapan leh pegi jauh x?

hi amd folks, its been a long time iv been here..

looking forward for amd's clan guidance for my problem :
http://forum.lowyat.net/topic/1500823
please help

that one shud be temp related, or not enuf volt pumped into the proc, correct me if im wrong sifus

my computer > property > advance > start up & recovery > system failure > uncheck automatically restart. 

Finally got back my rig, fixed the leak and currently priming at my OCed settings of 300x11 = 3300Mhz with 1.46V on load (yeah, it needs that high without crashing )

Custom prime settings with enabled FFTs = avg 45c, max is 47c (aircond room), gonna try without aircond tomorrow (results are wonderful, way better than last time)

Now I think back, no need to prime so long ler
1 day me not gonna use the CPU for like more than 3 hours?

HAHAHAA.....as long don't crash on me can adi
OCZ's running at DDR1000 with 5-4-4-10-19-2T at 2V
So far no problems

Maybe I will try 4-4-4-10 for the lulz tonight

fuhyoh ddr 3 2.1 v  not hot ka?

tengah nak main ddr 3 >1.66 neh tapi takot siot!

u can email them for d bios update, they should provide d bios eventhou they're ledi outta desktop mainboard business. i believe thuban still can run decently on those boards eventhou they're optimized for 8xx series. 

yo saturn, old news dee, go google la, they quit in mobo business dee

yup! DFI already bungkus nasi lemak...you can see the info at fudzilla.com! Or you can pm malaysia dfi distro to help u to get the latest bios.Convergent is dfi distro in malaysia,they located at amoda building,but cant remember which floor! LOL

Damn, I came across the time that I hate the most during OC~~
Previously can prime error free no problems, now with the same settings for RAM, error at 56 minutes at Core 1....haih

Well, don't care ler.....lol
As long as during load no BSOD or instant crash is good enough for me hahaha

Mine is at OC state....oh well, probably I know whats the problem
Go back and try again.....hahaha

The thing is processor nothing wrong, only when I prime with custom settings for RAM then error. Custom settings for proc no error ~_~

Like example: Vcore full load at 1.46V, processor no problems, passed 1 hour nicely, RAM error (NB at 1.2v and VDIMM at 2.0v). Then I upped the voltage, full load at 1.47V, RAM error again, then to my same settings as last time 1.48V load also RAM error at Core 1. Lastly I haven't try at 2.1v VDIMM. Go back and try later