yalo...coz i cpu volt use 1.56v...then only can stable it..run prime arn 15minute

---

Added on August 9, 2010, 11:44 pmnow trying new setting in 4.15ghz...hope will seccess run prime in 1 hour..

---

Added on August 10, 2010, 12:18 amwoho!...jus finish run prime test 1024k...

This post has been edited by alan kc: Aug 10 2010, 12:18 AM

^bro what mobo r u using? ch4? evo?

C3f

i update my oc to 3.7ghz..
mine stock ram is 1333mhz..

now 14++mhz.. it's ok?

or need to low it down?

If its stable at higher speeds than 1333Mhz, then its okay if not, then you set the RAM back at 1333Mhz default

if i low it down.. i cannot boot the windows..

after up the ratio to 3:8 aka 14++mhz.. can load the windows..

Ur running on KVR? If KVR shuld be ok at 14xx, i'm running my KVR at that speed with low 24-7-7-7 timings vdimm volt 1.65v..

nope.. i'm corsair..

tgh prime nih..

kalo stable, prime akan show sume takde error kan?

Yup, if stable prime will run no prob

Ram volt brp?

---

Added on August 10, 2010, 12:22 pmvery dissapointed..last night cn prime over 1024k..bt 2 day i can run prime jus only 1 minute then 1 of d core stop working..can any1 tell me wat problem?

This post has been edited by alan kc: Aug 10 2010, 12:22 PM

Increase more voltage or bump down the speeds

Bump down d speed?u mean is??nw i using 1.55v wit enable loadline calibration..my tmpin temp go until 71,then core temp#Is 50

finally.. windows freeze.. low voltage?

Wat ur cpu volt?

3.6Ghz i set in bios at 1.3+V

try 3.7Ghz at 1.3+V.. freeze when prime..

i think i need to increase more voltage..

my mobo is overvoltage..

My Cpu-Z Validator

This post has been edited by faiz2036: Aug 10 2010, 01:04 PM

Haha..1.3v to low d la..u try 1.4 then u up to 3.8 ghz..bt bcareful ur temp..wat cpu cooler u use?

like i said before my mobo is overvoltage..

setting up 1.3v in bios.. when speed increase at top 3.6..

cpu-z show 1.408v..

i need to more careful to handle overvolt mobo..

need to increase bit and a bit..

this evening, i go moderno to buy 212+..

Bt 1.3v ur mobo overvolt??asus mobo go until 1.45 then d colour turn to yellow, then 1.75 turn to red...yellow mean mid volt,red high volt...buy 212+ better go for v8...

i dont have such a big budget for hsf and i do a minor oc..

i think hyper 212+ is enough because very annoy with stock fan hsf sound..

nope, i think u misunderstand..

i means overvolt means overvolt automatically..

i set 1.3V but it spike to 1.4volt..

that's what i means..

Oh...haha..cpuz reading nt d real volt..jus only d real volt is see at d bios..last time my volt go until 1.75v,cpuz jus go until 1.42 only..haha