Our stock GB ratio is gud enuf for pickup actually. Usually wat ppl 1 is a longer ratio for better top speed.

larger diameter flywheel is only for better power transfer between the engine and the drivetrain. Meaning less clutch slip and less power lost for high power engine. It does not effect the gear ratios.

In dat case u nid longer ratio final drive. Using longer ratio will improve the top speed. Meaning dat u can archive higher top speed @ a lower rpm. But u might gonna have problem climbing steep hills unless ur engine is powerful enuf to push it.

Mirage 2WD GB Ppl usually "kacuk" those final drive gear so u can tarik longer

Intake and exhaust. Check the extractor izzit oem or cap ayam or a gud performance aftermarket extractor. after dat can play with hi profile camshafts and etc.

Yesterday nite baru ada TT... U all x attend meh???

TT Shawn and me are planning to make a trip to Genting. Gonna confirm it later after Raya.... Maybe few weeks after Raya kot.

nola, juz a steady convoy trip uphill. Lepak2 yumcha Tok Kok Sing Song thn we take a slow drive balik.

This is not a peksan trip like 4g1series. I m organizing this trip to Genting via Genting Sempah old road in the morning is to make the trip more fun to drive not go flying down into a ravine. For safety sake, I m gonna be strict on this. Convoy ethics will be posted up later.

Kompang.... jgn x kompang....

Apa 522??? Mau kena whack ar??? :unkerfred:

Mine 16.4v all the time only.... On ekon and headlights oso still fluctuating between 15.8-16v..... Swap with a dead battery can charge in 6-10mins on idling. Enuf to crank a car.

---

Added on September 12, 2010, 7:44 pmI see a Saga Knight avatar there

This post has been edited by rozz_1291: Sep 12 2010, 07:44 PM

My ISC oso dah rosak. On ekon rev drop till engine vibrate kaw2. sumtimes it even stalled. But weird thing is, early in the morning or cold start I have no problem with my idling.

Cold start: 1500 rpm
Warmer: 1300 rpm
Engine heated up: 900 rpm
Aircond running: 400-500 rpm (FICD)

Gonna change car???

Come down S.Alam and pwn my car.....

I use Myvi only.... 1.3 with sampan handling.... my cilok-ing skills very lauya....

Apa mau??? come laa....

To all who is still on stock steel bumpers, if possible try to keep the steel bumper on. I would recommend to stick with it

Xder la berat sgt as u all sangka. Dah pernah try bukak and angkt??? I've DIY changing it and its not heavy as u all think la....

And it doesn't affect on ur FC, pickup, top speed bla bla bla till its noticeable lor...

Sama ngan body rentung, tebuk lubang 50cents size dat much doesn't make a big diffrnt.

Where got lansi.... Helping catacombs promote only maa....