Today i took out my spark plug for a look and i got these



does these means detonation and too much fuel?

This post has been edited by Chan320: Jan 2 2011, 02:17 PM

solved
steering rack mounting bush kong
change for 36 buck for 2 piece
steering very precise now but damm stiff

hi,

my iswara i want to change the wheel nut.. currently, the nut is cheapo type with the bolt thread exposed. i want to change wira type which covers the bolt head. anyone know what type of nut? 1.25 or 1.5? and how much eh? i duwan fancy nuts (eg. alu) as it cant stand the airgun tightening most mechanics use...

so cheap?
i need change the whole steering rackv

LMST got 2 types right? One w/ small exhaust tip the other w/ big "vroom" one? Mine is small tip, if bring to Proton service center can ask them to change? Any experiences? How much will it cost me?

---

Added on January 3, 2011, 2:05 pmJust changed my rim to 15" Lenso rim yesterday. Yes I know Thai brand only but still excited I finally changed from the stock rim

This post has been edited by Rhadykall: Jan 3 2011, 02:05 PM

hello guys.where can i get cheap rapid stop brake pads.i live at shah alam.
and i want to scheme my disc too.can any1 help me suggest some nice and affordable work shop nearby

sure steering rack kong ?????
have ur forman check properrly 1st oh
i sent to my workshop the boss was my buddy but was not in so 1 of his new sin ka lan worker help me check say my rack kong la my lower arm kong la this kong that kong
then i wait till boss come back ask him again he check then discover only mounting bush kong

if wanna tk out rear drum brake, after screw out the tire screws, do i need open d center cover and unscrew it to tk out the drum brake? tire screw size 21 right? how bout the center one? hiding behind the cover protector

anyone?

sifoo kalian....any suggestion on the replacement of stock filter aka the paper typed filter?? i plan 2 buy k&n or mayb sum other cheaper brand like redline?? which is more worthy?? currently i'm using open pod...plan 2switch back to oem filter box but not using back the paper filter cuz itz restrict most of the airflow....and i oso plan 2 drill a hole at the side of the bumper to install a cooling hose

Try redline,its much cheaper than k&n.been using it on my car and response is much better

rm180 most probably include installation...
60bux timing belt usually just the stuff... which i dont recommend... try get more reliable brands... Gates timing belt kit cost approx rm100... MMC slightly higher...
remember to change ur water pump as well... its a 1 time job, coz changing water pump in the future requires removal of ur timing belt...

carbon deposit building up... most probably makan minyak hitam d... all 4 also same condition???... or just 2 pc??...

go outside any exhaust shop la... far cheaper den do at proton...

http://www.rapidstopbrakepads.com/index.ph...e&id=7&Itemid=2

yes u need to remove the center cap... not sure what size though...

got budget i recommend k&n... if tarak, any washable filter also can laa... as long as rajin wash it and make sure the filter element is not damaged and still allowing airflow going through it...

Sifus, can tell me what side skirt this LMST is using? I never bothered changing front and rear bumper because I never found any side skirt that is as low. Love how the DAMD front and this side skirting look together. Thanks




Below: My ride as it is now. Very tak hebat, I know



This post has been edited by Rhadykall: Jan 4 2011, 06:40 AM

cheh....mine free and DIY also..... ..........

im jus add little piece of rubber AKA piece of used timing belt to hold bush.....normaly change bush just can stand while.....then it kecut.....

---

Added on January 4, 2011, 8:04 amwah...itu mau tipu-tipu......

---

Added on January 4, 2011, 8:08 amwhere?? murah tu....i malas mau tukar sendiri coz x de barang...... ......

This post has been edited by GMS FearLess: Jan 4 2011, 08:08 AM

[quote=the_catacombs,Jan 4 2011, 03:21 AM]
carbon deposit building up... most probably makan minyak hitam d... all 4 also same condition???... or just 2 pc??...

Bro,all 4 are like that but the one closes to the pulley have more white coating but my exhaust din emit any white smoke.hmm....probabily due to my gasket leaking already.if so do i have to change the spark plug as well after i change gasket?

melaka... murah ke??...

yes... better change sparkplug as well... carbon buildup'ed spark plugs tend to misfire more as current cannot jump the plug electrodes...

[quote=Chan320,Jan 4 2011, 08:54 AM]
[quote=the_catacombs,Jan 4 2011, 03:21 AM]
carbon deposit building up... most probably makan minyak hitam d... all 4 also same condition???... or just 2 pc??...

Bro,all 4 are like that but the one closes to the pulley have more white coating but my exhaust din emit any white smoke.hmm....probabily due to my gasket leaking already.if so do i have to change the spark plug as well after i change gasket?

[/quote]

my exhaust olso doesnt emit black blue smoke but the spark plug inside blacken within 2 month

---

Added on January 4, 2011, 1:24 pm[quote=Rhadykall,Jan 4 2011, 06:12 AM]
Sifus, can tell me what side skirt this LMST is using? I never bothered changing front and rear bumper because I never found any side skirt that is as low. Love how the DAMD front and this side skirting look together. Thanks


Below: My ride as it is now. Very tak hebat, I know



[/quote]

custom made la the skirt

---

Added on January 4, 2011, 1:27 pm[quote=pitywoman,Jan 3 2011, 08:14 PM]
if wanna tk out rear drum brake, after screw out the tire screws, do i need open d center cover and unscrew it to tk out the drum brake? tire screw size 21 right? how bout the center one? hiding behind the cover protector

anyone?

[/quote]

yes
very hard to pry out the drum 1 wor
if pry out wrong will ruin the bearing
i try once and give up

This post has been edited by sinister_sid: Jan 4 2011, 01:27 PM

Thanks for fast reply sifu

depends on what black is it laa...

wet wet black
u see the pic be4 ma
neh the tak tau focus pic forgot d ????

gila murah.. usually 400-500 to change it.....

mana tuu ??can share where the place??milage for the item??

---

Added on January 4, 2011, 6:08 pmhave technique to pull out the drum...actually bearing outside and inside same........you must provide clean place to put drum and in case bearing pull out....if contaminated with sand......
replace the bearing

This post has been edited by GMS FearLess: Jan 4 2011, 06:08 PM