You imagine a board vibrating and you put your hands on to stop or reduce it.

it works for wooden enclosure too, coin is because it is more dense, sticking or putting it there makes that part of the enclosure denser than other part.

Second that

Yes you need burn in, but before and after might not have amazing big difference depends on how you find it.

Disconnect one of the polarity on each of the satellite, let the woofer sound only, see is it really not functioning properly or not.

Should be using the DAC function, not the amplifier function. Pairing with amp can kill the S530D amplifier by overloaded input, and never give better sound quality.

Edifier M3400 or e3100.

Want more bass then choose M3400, e3100 is smaller on woofer but the satellites seems to have better sound compare to M3400. M3400 has wired volume controls for convenience, e3100 stuck at woofer there.

Does not matter with the age, as long as it sounds great you'll never regret it.

So no worries, do audit 1st before you buy.

Make yourself a stand using some stiff material such as board




Another thing to share with edifier users, if want a little more performance from the speaker without modding, you can find something lift the interconnect from ground. In my case i done like this:


Remember also try stay far from power cables and let it as less contact to wall or anything.

I should quite easy to find the difference on Edifier speakers, the hints is the sound more relaxed and like floating up.

Theory behind this? i can't really understand it, it is about cable resonance or static electricity affects it. At first i thought this was a extreme troll then i tried it on a hi fi equipment, and it really got me stunned.

I did notice more grainy on the sound after i lifted it up.

Overloading the input voltage will kills the amp, when overloading amp power and loud volume will overheat the voice coil in the speaker if the speaker cannot handle such high wattage. Not that easy to kill Edifier speaker because thier quality control is really good. I remember i had burned in 5 hours straight with loud volume 200hz and no problem to my speaker, while my friend Z2300 burn in moderate loud volume for 2 hours had its voice coil killed.


Oh yea about the lifting stuff, lift up interconnects and speaker cables will give bigger effect. I had mine lifted both and sound smoother and more open compare to lifting interconnect only.

Welcome to da club


I always wanted to upgrade my speaker to Edifier bookshelf but my M3300 still running fine and sound good....

I wonder does edifier sell separate parts or not...thinking of changing the satellites speaker to e3100 or S330 model

You should go loud burn in for few hours.

If there are ppl running loud with PA system nearby i'll definitely kill them....

They like clubbing SPL few hours a day, thats enough to make me killing them....

And when you hear a system has slow sounding, just consider it is blur....the BPM of the song is still same, but the details are lost make you feel it slow.

Provide good source and cleaner main power the Edifier speakers can perform as expected better performance.

I kenot go liao >.<

I wanted to
but hard assignments and final exam starts killing me

Sry bro me seems like so many problems one....
Saturday class until 1pm ~.~