Outline ·
[ Standard ] ·
Linear+
-+♦+- LYN OFFICIAL PROTON PERSONA THREAD V8 -+♦+-, Our Pride N' Joy
|
jackyap84
|
 Jul 1 2010, 11:43 PM
|
|
QUOTE(jasontantenghuat @ Jul 1 2010, 11:09 PM)  My AT 3000rpm at 110kmh. mine is about 2.5k rpm when reach 100km.
Added on July 1, 2010, 11:46 pmQUOTE(jasondotcom @ Jul 1 2010, 12:11 PM) 1. Taking screws from another stock car is just plain irresponsible. Malaysian mentality. 2. No my car doors are easy to close. In ur case, perhaps u need to send to SC to have it re-adjusted properly. Most likely the door locking mechanisms are not properly aligned with the door lock striker. For mine, my driver door needs to be re-adjusted because if i didn't close properly.. the door could suddenly open again but of course not fully opened because there is a secondary safety lock that prevents that. For me, i will be adjusting it myself. Easy easy la. Btw, if ur gonna send it for adjustments, request them to re-grease the hinges and locks at the doors for you. It helps pretty much as well. 3. Salesman utterly loves talking crap. No crap no sales. You believe the salesman? Not one salesman i met is honest enough. 4. Below drawer that you mentioned. Yes there is a "hole" there. I also believe Proton could have designed a cover to cover up that part.
Added on July 1, 2010, 12:12 pmCan why not! will send to SC and check. besides, these 2 days i drive without turn on any music to monitor the car, i notice that the some sorf of air-con sound come from front passenger seat under the drawer there... is it normal? it come out periodically. This post has been edited by jackyap84: Jul 1 2010, 11:46 PM |
|
|
|
|
|
summer9uy
|
Jul 2 2010, 01:25 AM
|
New Member
|
[quote=jackyap84,Jul 1 2010, 11:43 PM]
mine is about 2.5k rpm when reach 100km.
Mine 2.9k rpm @ 110KM
did tries 4k rpm @ 160km (testing only)
|
|
|
|
|
|
muslayer
|
Jul 2 2010, 06:56 AM
|
Getting Started
|
hhm....why all different? mine MT 100 km/h = 2.9k rpm
|
|
|
|
|
|
jasondotcom
|
Jul 2 2010, 08:41 AM
|
|
|
QUOTE(dattebayo @ Jul 1 2010, 09:55 PM) noobie here, what is the purpose of having a VS? it was just explained at the upper portion of this page. |
|
|
|
|
|
chew1188
|
Jul 2 2010, 08:47 AM
|
New Member
|
QUOTE(jasondotcom @ Jul 2 2010, 08:41 AM) it was just explained at the upper portion of this page. mine is 3k rpm running 110km/h |
|
|
|
|
|
ralf
|
Jul 2 2010, 09:36 AM
|
|
|
AT(Non-IAFM)
70km/h - 2000rpm
80km/h - 2200rpm
90km/h - 2500rpm
100km/h - 2800rpm
110km/h - 3000rpm
120km/h - 3250rpm
140km/h - 3800rpm
160km/h - 4400rpm
170km/h - 4700rpm
180kmh/h - 5000rpm
190km/h - 5400rpm, forget liao..so fast, didn't look at speedometer what's the revv
200km/h - so fast, didn't look at speedometer what's the revv
|
|
|
|
|
|
jackyap84
|
Jul 2 2010, 10:30 AM
|
|
|
i noticed that another problem after 2 days drive the new PE H-line. There is some metal knocking sound come from front driver side (near the top of obsorber area) when doing cornering to left hand side and it happen when on unflat road. it is very obvious when i going up parking lot which turn around with the round shape all the way go up and with the unflat road all the way.
what do u guys think of it? what is the possibility?
|
|
|
|
|
|
jasondotcom
|
Jul 2 2010, 11:18 AM
|
|
|
QUOTE(jackyap84 @ Jul 2 2010, 10:30 AM) i noticed that another problem after 2 days drive the new PE H-line. There is some metal knocking sound come from front driver side (near the top of obsorber area) when doing cornering to left hand side and it happen when on unflat road. it is very obvious when i going up parking lot which turn around with the round shape all the way go up and with the unflat road all the way. what do u guys think of it? what is the possibility? Damn Proton! I thought they have solved that issue. I bet its the orifice valve needed to be installed into the power steering line near the tank. Once installed it will be 99% ok. Go SC tell them.
Added on July 2, 2010, 11:19 amBtw, do u guys know that the redline of this car is about 7.2 / 7.3k? Try revving it to the max till it hits the rev limiter. Anyway just FYI. I wonder why they put 6.5 as the redline on the gauge. But then since engine power drops before that......so that does not matter though. This post has been edited by jasondotcom: Jul 2 2010, 11:19 AM |
|
|
|
|
|
jackyap84
|
Jul 2 2010, 11:21 AM
|
|
|
QUOTE(jasondotcom @ Jul 2 2010, 11:18 AM) Damn Proton! I thought they have solved that issue. I bet its the orifice valve needed to be installed into the power steering line near the tank. Once installed it will be 99% ok. Go SC tell them. erm... the sound is weird, only happen when doing continuos cornering toward left hand side and the sound come from front driver right side. the sound like the metal knocking metal sound, feel like something is loose. but there is no sound when doing right hand side cornering. * it happen on unflat road only. |
|
|
|
|
|
jasondotcom
|
Jul 2 2010, 11:46 AM
|
|
|
QUOTE(jackyap84 @ Jul 2 2010, 11:21 AM) erm... the sound is weird, only happen when doing continuos cornering toward left hand side and the sound come from front driver right side. the sound like the metal knocking metal sound, feel like something is loose. but there is no sound when doing right hand side cornering. * it happen on unflat road only. if that is the same sound that i think you think it is..... then its not the sound of metal knocking actually. its the sound of "excessive fluid pressure" as mentioned by the mech. So thats why orifice valve needed to be fitted into the steering power line under the power steering reserve tank. Get it fitted! Anyway it costs about RM3 plus per piece and ya u need one only. And for me, it solved 99% of the sound. |
|
|
|
|
|
jackyap84
|
Jul 2 2010, 01:12 PM
|
|
|
QUOTE(jasondotcom @ Jul 2 2010, 11:46 AM) if that is the same sound that i think you think it is..... then its not the sound of metal knocking actually. its the sound of "excessive fluid pressure" as mentioned by the mech. So thats why orifice valve needed to be fitted into the steering power line under the power steering reserve tank. Get it fitted! Anyway it costs about RM3 plus per piece and ya u need one only. And for me, it solved 99% of the sound. Okie. Will go to SC and ask around. Is all the SC aware of this? Just mention of orifice valve need to install will do? |
|
|
|
|
|
d3x
|
Jul 2 2010, 02:44 PM
|
|
|
QUOTE(Kevio @ Jul 1 2010, 09:36 PM) So how does the red look under the sun? Is it nice? Is it slightly orange red? Can seem to see an actual Persona Elegance Brilliant-Red on the road yet. I'm thinking of getting this colour too but still undecided...
Added on July 1, 2010, 9:44 pmMay i know why? I'll take some photos and post it up tomorrow. In the mean time, here's a quick pic I took last week at around 6pm. Color's a bit off due to the camera. » Click to show Spoiler - click again to hide... « Drive-by-wire has this lag which is quite noticeable to some, including me. Maybe if Proton had programmed the ECU better..  This post has been edited by d3x: Jul 2 2010, 03:32 PM |
|
|
|
|
|
jackyap84
|
Jul 2 2010, 05:32 PM
|
|
|
Anyone successful modify Lokatoo A903 to Garmin so far?
|
|
|
|
|
|
arfaie
|
Jul 2 2010, 05:59 PM
|
|
|
QUOTE(jasondotcom @ Jul 2 2010, 11:18 AM) Damn Proton! I thought they have solved that issue. I bet its the orifice valve needed to be installed into the power steering line near the tank. Once installed it will be 99% ok. Go SC tell them.
nope..they dont solve it yet. mine also got that sound..and to make it worse,the tech and service advisor wont listen to me when i request them to install the valve for me..the tech claimed he already tighted some nuts and ask me to test first..but the sound still there..really fed up with proton edar..can we request the valve at authorised SC? |
|
|
|
|
|
AndrewTan90
|
Jul 2 2010, 06:01 PM
|
New Member
|
My PE rear left side drum brake got some weird sound why braking down,last nite i have been send for the first service and asked them to solve the problem...when i pick my car i do ask them 1 more time that izzit my problem solve edi,the merchanic told me that it's solve edi...
afther i drive away and braking down...i do heard the sound..
They dint even fix the problem and just told me that they have solve the problem...what kind of lame service are these ? >"<
|
|
|
|
|
|
arfaie
|
Jul 2 2010, 06:12 PM
|
|
|
im now waiting their phone call asking for feedback..sure will bash kaw2 this time
|
|
|
|
|
|
jackyap84
|
Jul 2 2010, 06:15 PM
|
|
|
I hope our gang here can share with us which SC can install this valve when we explain the problem to them straight away.
|
|
|
|
|
|
wilsonjack228
|
Jul 2 2010, 06:36 PM
|
|
|
Just booked a PE silver H-line  , the SA said will informed if got other color , should I go for other color  Any one got free security tint from their SA ? |
|
|
|
|
|
chew1188
|
Jul 2 2010, 06:39 PM
|
New Member
|
QUOTE(jackyap84 @ Jul 2 2010, 05:32 PM) Anyone successful modify Lokatoo A903 to Garmin so far? yes u can check my previous post. got some guide and link there |
|
|
|
|
|
muslayer
|
Jul 2 2010, 06:53 PM
|
Getting Started
|
QUOTE(arfaie @ Jul 2 2010, 06:12 PM) im now waiting their phone call asking for feedback..sure will bash kaw2 this time Most SC in KL area know about the orifice valve, even the rear drum brake sound.. Taman Midah and Serdang SC know about it.. others not sure This post has been edited by muslayer: Jul 2 2010, 06:55 PM |
|
|
|
|
Quote
0.0258sec
0.25
6 queries
GZIP Disabled