GONG XI FATT CHOY guys..


Options>Files>Add files to download in pause mode(disable)

HighID = port forward OK.

If you want to keep your firewall on, you need to allows eMule traffic to passby, not close it. You can check Bitdefender's manual on how to do this. Where you download the server.met? Just edit with notepad, you should know what it is inside server.met. Should put into eMule>config folder.

Gong Xi Fa Cai to u also, playsafe

hi all,

i have a lil prob, my download speed is really bad even though high ID and also I leave my pc on over nite for few days. I have changed the ports to a higher number above 10000 but still no help. Although High ID and also KAD status is open, when i test the port under emule's Options>Connections, my TCP test failed... any reason for this? I connect via a router which I have already configured the Virtual Server and firewall properly with a static IP.

and may i know which broadband package and which area are u staying at now?

---

Added on March 18, 2007, 8:43 pmMy emule speed with lowid tops at around 10k only.

This is my emule speed with wifi from my neighbour. Not nice to ask to change his settings to portforward la



PS: Consent obtained verbally for using his wifi

This post has been edited by skma: Mar 18 2007, 08:43 PM

Anyone can show the port range suitable for emule? I only know that 4661 is default port for emule.

This post has been edited by CuteSniper22: Mar 22 2007, 01:15 AM

try look at here ... http://portforward.com/cports.htm

From v0.46c, eMule does not has default port, you can use any ports you like.
Just use the range between 49152 and 65535, these ports do not have any program assigned to them.

Any port will do. As long as it's properly opened (forwarded)

i just started to use it.......and why it won't start download?

Because there is a queue system to prevent leeches ?
Still working awesomely at my end.

Ok, here's my problem. My comp crash while I was downloading 2 files with eMule, but when I boot it back up, one of them is gone from the task. I still have the unfinish file with me, is there any way to put the task back into the list?

Thanks.

As in the temp. files ?
What happens when you try to reload the ed2k link ? It doesn't automatically rehash ?

Are you using the latest version of eMule ?

Yes, the files in the temp folder. I'm using the lastest 0.47c verycd build. When I try to rerun the ed2k link, it starts again a fresh file. I didn't want that as my previous file was almost completely finish. Is there any way to run the incomplete file again to resume the download?

Check you eMule TEMP folder, there should have 3 type of files inside
*.part.met.bak
*.part.met
*.part

Sample:
Most of the time this happened coz of the *.part.met was missing. Before start, pls shut down eMule. If your broken download is 003.part, check if the 003.part.met izzit still there? (probably not) If not, you can create a copy of 003.part.met.bak, and rename it to 003.part.met. Launch eMule again.

Hi guys, sorry if this has been asked, i tried to search but cant find it, how do i use the schedule option in Emule?

i set it to start at a certain time, but then it doesnt do anything. Do i have to leave it connected and pause the download? (i think i tried this, but still not working)

---

Added on April 29, 2007, 12:51 pmSo uh, nobody uses the scheduler here??.....

This post has been edited by xavier7: Apr 29 2007, 01:01 PM

Hi xavier7, Not sure bout that.. You can check this as reference
: http://www.emule-project.net/home/perl/help.cgi?l=1&rm=show_topic&topic_id=117

---

Added on May 3, 2007, 3:52 amEmule 0.48a Beta1 Released

The mainfeatures of this version are:
• First step torwards Vista by fixing most glitches and problems Vista had with eMule and by this also support of multi user installations (for all OSs)
• Support for UPnP
• A spam filter for search results
• Several GUI improvments like smiley support for IRC and messages , nicer file tooltips and so on
• And as always fixing several bugs and adding other small changes

For all the details, check out the complete changelog below!

: http://forum.emule-project.net/index.php?showtopic=123724&st=0

- - - - - - - - - - - -

Download:

v0.48a BETA1 - Installer


v0.48a BETA1 - Binary


- - - - - - - - - - - -

Support for UPnP..

This post has been edited by playsafe69: May 3 2007, 03:52 AM

i dunno if this is previously stated but i hope u guys dun mind if i repeated.protocol obfuscation should be enabled n port forwarded correctly(u noe it when the earth icon is both green) u shud also maintain ur ul ratio so u can rotate queue faster...4 me i can easily max my dl speed with popular files...

This post has been edited by samuel89: May 5 2007, 12:04 PM

Beta 2 released!

0.48a BETA2
-----------------------
- May, 08. 2007 -
-----------------------
Ornis: Changed to wizzard to set file proper file permission on installed config files
.: Fixed another Bug in the SourceExchange, which caused eMule to not response to requests in certain cases [Xman1]
.: Sorting for cumulative stats in the sharedfiles list is now properly remembered when restarting eMule
.: The "Disable UDP" and Enable "Kad" options now exclude eachother [leuk_he]
.: Fixed a bug in UPnP when the UDP port has been disabled by the user [leuk_he]
.: IRC optional serverports should work prorperly now
.: Fixed a bug in IRC when receiving ed2k links from other users
.: Added a excess flood protection for eMule IRC responses

-----------------------
- May, 05. 2007 -
-----------------------
.: The Spam indicator icon has been replaced [icon by Daan]
.: The first time wizzard is now using the proper ports when testing UPnP in case a user has changed the ports in the wizzard
.: Fixed eMule (error-)handling for files whose paths exceed the operation system pathlength limit
.: If eMule started the Windows UPnP Service but failed to forward ports via UPnP it will shutdown the service afterwards
.: Added an option to disable smileys
.: Fixed a small memleak in the smileyselector window

http://forum.emule-project.net/index.php?s...pic=123724&st=0

sorry guys i cant go through the last 50 pages, it get me tired reading it. just got one question.

currently my pc connecting to LAN, it got firewall in it, and given me a Low ID. so if i want to change to high id i have to unblock the firewall, so if 12pc connecting to it, can i just unblock my port only and leave the rest blocked?
thanks

If I understand your question correctly, yes you can, by portforwarding. http://www.portforward.com/