Hi, may i knw how much to grille a whole double storey terrace house?

Give your measurement if not very hard extimate.

from what i see, if the grilles has less or none flowery patterns. It's not that easy to break.
Either u want beauty or security.
And Of coz i dont like that. But malaysia boleh. apa-apa pun can happen

Another quotation i get.

Mild Steel door & window grilles c/w powder coated.

Door grille (Frame: 1” x 2”, Outer Frame: 1” x 1”, Infill ½” x ½” solid bar)

1)      Mild Steel Door Grille 3' x 7' = RM567

Door grille (Frame: 3/4” x 3/4”, Infill ½” x ½” solid bar)

2) Mild Steel Window Grille

    a) 6' x 4' (Living Hall) = RM528

    b) 2' x 4' (Living Hall) = RM176

    c) 4' x 4' (Kitchen) = RM352

    d) 4' x 2' (Kitchen Bathroom) = RM176

    e) 6' x 4' (Master Bedroom) = RM528

    f) 2' x 2' (Master Bedroom Bathroom) = RM88

    g) 4' x 4' (2nd Bedroom) = RM352

    e) 2.5' x 2' (2nd Bedroom Bathroom) = RM110

2) Swing Aluminum Gate as attachment size 10' (W) x 6' (H) with powder coated

Mono = RM2,850
Auto system = RM1,500 (OAE Brand)

Hi,

can someone tell me from the quotation:
a) Frame: 1"x2" is mean what?
b) outer fram: 1"x1"?
c) infill bla bla bla ?
d) i read of gap 4"1/2 bla bla bla, what is that mean?

Since alot of people recommend Three Kim Metal works, do they provide service in Melaka as well?

For the Three Kim Metal Works happy customers,

Can provide some comments on their pricing? Expensive if compared others? Any warranty??

So far I have compared a few, their window and door grill are quite on par with others..as for main gate their pricing is better per foot run..quotes are very detail and transparent, so you have option to select the best cost that suit your budget..in mine for less critical area, i opt for mild steel grille while others wrought irons

example: bathroom..i opt for mild steel grille with powder quote since more moisture..so in quote just add on those sq feet with powder coat cost..others may put a minimum cost for that few items

For me, I do not look into cost only but pay much attention to workmanship and finishings..since they are well known for their finishing, I don't mind the few hundreds (conditionally I put it as max 4% of the total cost) extra.

I believe this is the same for kitchen cabinets..materials and accessories, it will be not much different company to company..but workmanship makes much difference..we are the ones going to stay in a house for a very long time, so are we acceptable to having view that poor workmanship day to day..this is of course varies among individuals

What we look at..is value for the money..as another bro says..expensive may not means good..cheap may not means low quality..and the worst scenario, you pay peanuts, you get monkeys

Need to know is it reasonable for this quotation i get. Please see my attachment & give me advise. Thanks

Do you mind to share the supplier contact no.?

don't jus choose cheaper one...look at the workmanship part too...lots of my fren regret choosing the cheaper price one...cos workmanship suck...

Very much agree.. save 1-2k end of the day more trouble! My experience is even worst.. its my bro in law who did it for me. Using non-pure aluminum for my gate side door and internal house, say powder coat but the edging all rusty. And its just less than 3 months. Charge me 10k for the whole house. Wtf..