Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 DFI nF3/4 series (LP and Infinity) users come in, Overclocking ability and troubleshooting

views
     
Evogenix
post May 11 2005, 03:54 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
200-on-2.0-02-05-02-07-14-02-02-01-01-auto-auto-enable-auto-0-lv8-lv2-7.0-auto-16-disable-16-07-disable

my utt set on timings above on default clock...
just adjust alittle if you into oc-ing

Evogenix
Evogenix
post May 11 2005, 05:09 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
laugh.gif
quit burning for some time edi...

currently building a cool and quiet environment for my rig tongue.gif

Evogenix
Evogenix
post May 11 2005, 06:48 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(De_Cruelz @ May 11 2005, 06:01 PM)
Evo, so what's the oc setting you settling for day to day use?
*
as in my siggy 2.4GHz laugh.gif
almost 24/7 folding

my way to cool down the PWN area
user posted image

laugh.gif laugh.gif
Evogenix

This post has been edited by Evogenix: May 11 2005, 06:49 PM
Evogenix
post May 11 2005, 09:19 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
laugh.gif
go ahead... its just a simple add-on

i got sumthing in my mind now brows.gif brows.gif

Evogenix
Evogenix
post May 12 2005, 11:48 AM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(remysix @ May 12 2005, 09:10 AM)
how did u manage to get those fan hanging over the mobo?
*
the TT smart case fan was lockecd to xp120 heatsink
then i screw the 92mm onto TT smart case fan tongue.gif


Evogenix

This post has been edited by Evogenix: May 12 2005, 11:51 AM
Evogenix
post May 13 2005, 06:32 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
just flashed to 331-1 BIOS
folding for hours at 2.4GHz edi..
so far so good tongue.gif

from what i found @ 331-1 :
- updated and bugs fixed memtest86 from 1.51 to 1.55
- added a new fuction that enable to add 0.03v to vdimm that 3.2 or below [this is good for those that need aliitle bit more voltage to stablize their ram]

Evogenix

This post has been edited by Evogenix: May 13 2005, 06:33 PM
Evogenix
post May 14 2005, 05:18 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(De_Cruelz @ May 14 2005, 05:13 PM)
Well I got 1Gb of Twinmos Speed Premium with UTT chips. Wouldn't boot on 310 BIOS at default. Have to jump start using my BH6 then replace with the TMSP to get it up and running. Now it seems my TMSP is dead as it won't boot. One of the sticks I tested is not working sad.gif No signs of burn whatsoever though, it just won't boot.
*
eh... we have some same luck here...
1 stick of mine just wont boot sleep.gif"
now running at single channel doh.gif doh.gif

just flash to 510-2 BIOS
testing on it tight now =)

Evogenix

This post has been edited by Evogenix: May 14 2005, 05:18 PM
Evogenix
post May 14 2005, 05:23 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
what i found from BIOS 510-2 :
- updated memtest 86+ v1.55
- added new feature - capable to add 0.03v to <3.2 vdimm same with BIOS 331-1
- ram bootable into Windows using slot1 aka yellow slot [havent test on slot 3 due ram wont boot sleep.gif"]
- added new feature - "dram respone time" in ram setting table

Evogenix

This post has been edited by Evogenix: May 14 2005, 05:26 PM
Evogenix
post May 14 2005, 05:29 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(De_Cruelz @ May 14 2005, 05:22 PM)
Are both your sticks running properly now Evo? These UTT chips really don't seem to be that good after all. There's just so many cases of dead RAM with UTT chips nowadays.

How's the new 510 doing for you?
*
nope... my utt can codsider half dead...
sometime it works... but some time just unconscious
i dono want to RMA it or not... cause it havent dead yet sleep.gif"

Evogenix

This post has been edited by Evogenix: May 14 2005, 05:29 PM
Evogenix
post May 14 2005, 06:30 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
// De_Cruelz :

i found this on DFI street :

QUOTE(Angry Games @ DFI-street)
Western Digital parallel-ATA hard drives obey a somewhat different set of jumpering rules.

* If the drive is jumpered to be MASTER, the system will expect to find its slave and will keep looking until it does, or the IDE detection phase of POST times out.

* If the drive is jumpered to be SLAVE, the system will expect to find its master and will keep looking until it does, or the IDE detection phase of POST times out.

A master or slave setting without the counterpart being present usually appears as the system hanging or freezing. On detection timeout, the system usually tries to continue booting, often with the boot drive not being found either. Attempted warm reboots sometimes allow the system to boot, but with some risk of subsequent data corruption.

When the jumper is removed, the drive is set to run in single (stand-alone) mode. CS (cable select mode) generally works the same as single mode in this case.

CS mode often works with other IDE/ATAPI devices but in general, it is better to use CS mode only with another hard drive. With an optical on the cable with it, use master/slave settings.


hope this info helps you
Evogenix

This post has been edited by Evogenix: May 14 2005, 06:31 PM
Evogenix
post May 14 2005, 06:47 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
// De_Cruelz :
how many hdd you using??
do you select first boot priority to the hdd that installed your OS??

if you got more that 1 hdd... i suggess you pull out others and give it a try.. it might work tongue.gif

// ray99mond : nice htt there...
whats your
vcore, LDT voltage and chipset voltage??

Evogenix
Evogenix
post May 15 2005, 01:03 AM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(kvmcom @ May 15 2005, 12:28 AM)
wan play sli any idea for me?

i used utra d galaxy 6600 gt i saw at low yat gigabyte have sli bride can mix brand 4 sli?
*
yupe... you board MUST able to hard mod to nForce4 SLI
then you need to find a sli bridge, any brand will do...
then switch the jumper to activate the sli...

you need dual pcie vga card of coz tongue.gif

Evogenix
Evogenix
post May 15 2005, 02:33 AM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
woot.. my utt alife...
after afew hours of "mogok", it work back tongue.gif

comfirmation : BIOS 510-2 able to boot into windows using slot1 and slot3

Evogenix

This post has been edited by Evogenix: May 15 2005, 02:36 AM
Evogenix
post May 15 2005, 03:19 AM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
http://forums.vr-zone.com.sg/showthread.php?t=20409

c'mon... dont lazy with googling... answers all there...
just key-in the magic words "ultra d sli mod" then the result will came out sleep.gif

Evogenix

This post has been edited by Evogenix: May 15 2005, 03:20 AM
Evogenix
post May 15 2005, 08:08 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
QUOTE(De_Cruelz @ May 15 2005, 05:03 PM)
Evo, what exactly did you do to revive your TMSP?  I tried mine again once and managed to boot in with just the problematic stick. After that it wouldn't boot already and I got lazy so decided to put it back in the cover.

Hopefully I can make the RAM work again. I'm already short of so much money and a dead stick now is gonna set me back more sad.gif
*
no idea at all =/
after i plug in... it just boot into BIOS
btw, each time it able to boot, my working ram is on slot1/slot2 and the half faulty ram on the slot3/slot4

Evogenix
Evogenix
post May 16 2005, 12:57 AM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
// De_Cruelz :
all setting as in my siggy
no change =)

// winc87 :
nice to heard that... goin hard mod uh??

Evogenix
Evogenix
post May 20 2005, 06:39 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
// chris251285 :
go into BIOS, set first boot device to cd-rom
then save and reboot

if you are with the default BIOS 310, use the orange slot2 if you use single ram and slot2 + slot4 for dual channel

p/s : try to edit your post insteat of multipost

Evogenix

This post has been edited by Evogenix: May 20 2005, 06:42 PM
Evogenix
post May 20 2005, 07:34 PM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
// chris251285 :
i think you missunderstand what i said laugh.gif

your first question about boot into cd-rom:
if you want to boot into your cd-rom, you must select cd-rom as your first boot device in BIOS

your 2nd question about ram:
Since you can run dual channel without problem, i think the single channel failure might caused by BIOS.
try to flash your BIOS [310p] and see how it goes.

Evogenix

This post has been edited by Evogenix: May 20 2005, 07:35 PM
Evogenix
post May 21 2005, 12:51 AM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
// chris251285 :
yupe... that was an official BIOS and recommanded for most DFI ultra-d user

i m currently using the 510-2 beta BIOS. so far so good for this beta BIOS

Evogenix
Evogenix
post May 21 2005, 09:55 AM

I Missed LYN Grey Skin T_T
******
Senior Member
1,809 posts

Joined: Jan 2003
// winc87 :
it only got lv1- lv3 for "data drive strength" in BIOS 510-2
and added a new function "dram respone time"

Evogenix
« Next Oldest · Overclockers United · Next Newest »
 

3 Pages < 1 2 3 >Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0470sec    0.19    7 queries    GZIP Disabled
Time is now: 2nd December 2025 - 05:28 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.