the headspeed loss problem gone after i change back to governer, but even during governer i an feel the headspeed changing to be faster at times.

now the problem i faced, i dont know why suddenly my tail rod is SHORT. cant even get my tail slider to be at center now, funny thing is, before this i could (i have to really elongate the tail rod by unscrew the ball link to its max before it came off)

NOW. i dont know why, the tail rod is too short, i cant get center the tail slider when my servo is at 90deg, unless se v2 version where i can move the tail frontward or backward to get center tail slider, this time coz the servo is fix, i need to adjust the ball link...

CANNOT GET CENTER. tail rod too short.

---

Added on August 20, 2010, 10:16 amwhen my servo is in rate mode fix on the mount, i cant get my tail rod - tail slider 90deg... its off by alot!!!

suddenly this happen...

feel like my rod is shorten by itself....

i place the tail boom at its hole already, at its house...nicely ...

This post has been edited by sLapshock: Aug 20 2010, 10:16 AM

your other alternative .. boom mount the rudder servo (u have to get teh v2 control rod) or customise a new control rod (i made mine from CF rod and mounted from original position)
i have always felt the original control rod was a little too short anyway .. hehehe

is there anyway that i can get a longer control rod?

thing is, i could that right before, but not now anymore, even what i have tried..still the same...

is the rod shortened when i sleep???

---

Added on August 20, 2010, 1:35 pmok found out the culprit, now i pushed my tail boom to the max already until it cannot be push anymore....

---

Added on August 20, 2010, 1:35 pmnow...still vibrating problems...hate this

This post has been edited by sLapshock: Aug 20 2010, 01:35 PM

still vibrating ??
tail rotor shaft (1 set together with gear type) maybe bent then ... did u change that ??
i read u have changed the gears ... front and back ??
if u did ... then the only thing left is the torque tube itself and the bearing

btw ... why did u have to run gov mode to not have power dropout ??
set a straight line throttle curve of lets say 80 or 90% ... if u run that curve and power drops drastically when u pitch pump then u have some problems i would say ...

i just changed my torque tube to a new one, problem still persist.

i set to governer mode, because if i set to soft startsoft start and i do pitch pump... power loss headspeed..

---

Added on August 20, 2010, 2:49 pmwait..did u mean, set back to soft start... and set a flat curve? and see if power loss?

This post has been edited by sLapshock: Aug 20 2010, 02:49 PM

IF u have set soft start .. once the heli is spooled up and flying around .. u will have to be at ZERO throttle for about 2 secs b4 soft start is enabled again
so flying around and saying soft start is interfering is not possible unless u are at ZERO throttle in the air for a couple of secs

set one of your throttle curve at flat 90% or something .. then hover it around and do some pitch pumps
if u experience during this pumps than there is something wrong .. pinion slipping or something
setting it to gov mode makes the motor try and maintain HS without worrying about anything else ie. if u have a problem then the esc dont care it will just want to keep the set HS so u dunno if there is anything wrong
setting a flat curve and doing pumps will no doubt create a loss of power during those pumps ... but u have to judge for yourself how significant is the power loss
if it is enuff to make the HS drop til u have no tail authority then it is very bad and ther eis some sort of problem somewhere

soft start and flat curve are 2 different issues .. i am just trying to explain to u how soft start works

Wow, Trex550e looks like quite popular, mymega already back orders .......

go ahead and order ....
tell us when u get it .. hehehehe
the costs of the lipos oso will be a headache already

llllllllllll

Honestly, I am so tempted .... but not willing to pay so much now ....... Lipo should be getting cheaper next year for 6S but now still around 300 bucks each.

hehehehe, for sure I will let u guys know once i got it, but dun know when. Just here to talk and reduce my desire to own this bird

---

Added on August 22, 2010, 3:22 pmwhat are you trying to say? i dun understand alien language one

This post has been edited by daddoo: Aug 22 2010, 03:22 PM

i oso dont understand alien but i think he is trying to say he hates his trex450PRO laa ... hahahahaaa

Hahaha... Me want to fly another heli lor... dah bosan wt my trex pro. nak fly mini titan plak.

that is why plane easier ... can have multiple planes
different day or mood fly different plane .. hahahhaahaa
heli oso can .. hehehe

yuckkkk .... that 550e still has some issues to be solved. Guess that there might be v1, v2 thingy in the future just like the 450 sport .......

But overall comment to this heli is still positive ... u guys know about any others?

i more interested in SMALL helis laaa
now waiting for NINE SOLO PRO to come in stock so i can fly in the house .. hehehehehe
CHEAP maaa ... and i dont need to invert in the house oso

Changed your mind? Hehehe, you said you don't like fixed pitch heli last time

that one is big size .. this one is less than 10inch in length laa
small heli super sensitive one laa ... SYOK

Just drop by to say HI to fellow pilots here....I just got a Lama v4, learning hover indoor. Hope to one day fly outdoor n get to know members here..

Happy flying!

welcome to rc flying
lama v4 is a good starter for u to get hooked
once u have mastered the lama ... be prepared to bust your wallet .. hahahaha

eehh ?? rc helis all bungkus liau ah ??
all hate their helis already now ??