nevermind SLOWLY BUT SURELY.

i see.

nevermind slow slow, if i anak datuk then i can buy all at one shot.

i paid for everything already.

1 x HK540GT - RM540 (Brand New)
2 x Flightmax 2200 3s RM205 (Brand New)
1 x Futaba RS617 SGD120

i got Futaba 6EX 2.4Ghz already.

All i need is someone to set it up then im flying CCPM

---

Added on May 16, 2010, 4:53 pmnext month i'll get a 2nd hand balance charger...what type of charger should i get any reccomendation?

---

Added on May 16, 2010, 5:16 pmSelling PROLUX PRO3830 Lithium charger DC Li-Po 2-4 Cells
With Li-po Charge Balancer for 2-3-4 cells battery pack c/w JST-XH connector

Features:
1. Switching power supply technology in AC input
2. 10 bits microchip controller provides efficient and precise charge
3. Voltage booster 14.8V DC that can charge a 4-cell Li battery pack
4. Selectable charge rate 500mA, 1000mA and 2000mA
5. Automatically detects cell count and selects errors
6. With LED light and beeper to indicate the charging status
7. Short circuit protection for input and output
8. Use DC 12V ~ 14 V input
9. Combine with Pro3837A to become balance charging feature.
10. 12 bit microprocessor design can control the voltage accurately.
11. Four sets of LEDs show charging status for each battery pack.
12. Can inspect the inferior battery pack.
13. Work with Prolux Lipo charger. This balancer can be used to 2,3,4 cells battery pack.
14. Short circuit protection.
15. Compatible with Lipo charger from other manufacturers as long as it is for 2,3,4 cells charging.


This post has been edited by sLapshock: May 16 2010, 05:16 PM

No, it didnt came with the Rx and its $150..nevermindla i buy already, sigh..still need to pay $10 to change the modes.

nevermind bought already

Tried mode1, tried mode2 too. Im good at mode1, and i can hover well with mode2. But my brain refuse to tell that im using mode2, somemore most of the ppl flyinf at my side using mode1 and most importantly im comfortable with mode1 so... Mode1 tho i wish i could start with mode2, but i dont want to learn all over again.

Anyway, qiw, how do u set ur trex? I suppose mine is the clone of urs, so any tips?

Havent la, my ccpm only arrived tomorrow with disassembled rotor head and tail boom. I wonder if i could fix it on my own.

I also dont know how to set it at all, sigh. heliguru.com.sg charge sgd180 for settingup, i dont have the money lol.

Anyway, can u guys advise me regarding the charging and balancing.

I understand that, charging with 1c means i put a power of 1000mah into the batt in 1hour right? so in that case for 2200mah i charge for 2.2hours for a full charge?

Also i understand that balancing is a function where u balance all ur cells to 3.7v to make all the cells equal?

Can advise me on method of charging, what to set etc etc, coz my flightmax 2200mah 25c arrving tmrw as well.

Ok so let see if i understand.

1c equals to 1.8amp.

So for 2200 charge it at 1c or lesser.

Time its fully charge will determine by the charger (it will indicate u if its fully charge).

Balancer is a funtion where it will charge, determine each cell and if one of the cell overcharge, it will charge the specific cell to make all equal?

---

Added on May 17, 2010, 7:05 pmRegarding locktite, is it something like super glue? How much does it cost?




This post has been edited by sLapshock: May 17 2010, 07:05 PM

i got my hk450gt already!!

I GOT TWO SHOP.

one shop charge me rm500 for all setup done.

another shop charge me rm70 and he hover in front of you.

DUE TO MY STUPIDITY I THINK I BURNED MY RS717FS THAT I JSUT BOUGHT. I GO AND PLUG IN MY 2S BATTERY AND IT BURNT OFF!

---

Added on May 19, 2010, 3:14 ami still couldnt believe what have i just did. it was supposed to connect to the ESC not straight from battery. oh my god.i felt damn suck. now i am months away from flying.

i wasted $80 for R617FS.

---

Added on May 19, 2010, 9:14 amDamn i still couldnt forgive myself.

This post has been edited by sLapshock: May 19 2010, 09:14 AM

because it sparks off fire. f*** man. i bought it at a steal $80 only which is freaking cheap! the guy even test that its working. now i dont know why i did that. my whole room smell.

i thought esc connect to channel 3?

yes. its a steal. i bought it for SGD80 but look what happened? i rather not bought it.

so how do i test if the receiver? connect the esc to battery and the esc to receiver? that way?

i friend my sgd80 too

remember 2s lipo got 2 hole, i plug it in.

so how to test the receiver then?

so esc got the power from battery and rx got it from esc la..

hmm... sigh man.. i dont know why i did that~

---

Added on May 19, 2010, 10:12 amwhat is the sequence of building up heli?

1st assembled the kit
2ndplace all the electronics

then?

This post has been edited by sLapshock: May 19 2010, 10:12 AM

all the steps i know.

i only need u to eloborate on the 6th step.

thanks guys.

i have this.

http://helifreak.com/showthread.php?t=41692

yes i build all by myself, i havent locktite yet tho.

yeah, build it myself and got burn my motor.. freaking hell!

where can i get cheap pitch gauge?

no i mean, fix myself and burn the receiver. haha. but the rest are pretty well work. i just need to loctite but i need to test hover first, if confirm the locktite.