they're speaking about the IR sensor bro.

if both the TV and BD goes off simultaneously, it sounds like a power problem. maybe the plug/power socket to the TV and BD has a problem?

Sounds like a HDMI handshake problem. Might need to set some settings correctly if it continues to happen. Turn Deep Colour off. Try another cable. Else somewhere along the line there is a HDCP/HDMI negotiation error.

1st thing to try would be to change another HDMI cable. Then change the settings in the BD player (try different video settings etc....)

oh oh........

Thanks for the advice guys!

I think the power socket is not the issue as I had checked them just now and they look fine. The TV and BD player use 2 separate sockets and they look ok as the rest of the electrical appliances also connected to these 2 sockets work well without any intermediate cut off.

I supposed I would change to a new HDMI cable as anfieldude suggests and see how it goes... hopefully the problem will go away!

thanks bro karheng, found 47" cost RM4500 at USJ

from jintex? RM4500 is cheap for a flagship model

guys, need help, just bought 42RV600E , everything perfect to me. : ) .

but when am selecting picture size, i will only have
wide
4:3
Super Live
Cinema
Subtitle
14:9


Now my setting dafulted to Super Live... But how come i can't see 'Native' ?

I would like to change my calibre to sample given in page 35 ....



what is the best blu ray player that i can purchase (must suit rv600e) and can play file in many formats ( if possible can use source from usb ) other than PS3?

This post has been edited by rizvi: Jul 21 2010, 09:59 PM

bro can i know where you bought it..??i interested with it too...any shop recommended

Native only appears if u connect HDMI.. if u connect Component/Composite, your best choice will be wide

in Shah Alam but with price 3800 (with transport), maybe u can get cheaper if u find it in Puchong/Kepong.



I think this one is better than Samsung LCD 40C650 . especially in term of PQ and sound ( altough i think 40C650 has richer features ).

---

Added on July 27, 2010, 5:02 pmthanks ..


i have one more question, does anyone knows whther 42RV600E works well with A.C Ryan?....

This post has been edited by rizvi: Jul 27 2010, 05:02 PM

its near august already, where is the LED model?

Hi all Sifu , i just connect my desktop to my 42zv lcd using hdmi cable at chanel HDMI 3, it seem like that the hdmi just support video only cox my lcd no sound at all,any solution ?

have you try other HDMI port?
are you sure your desktop can output audio through HDMI? settings correct?

last time i was connect my laptop to my TV, also no sound, untill now also no time to test after got my Media player.
I think it will not like DVD player, just plug and play because computer run video and audio in different output.

So if your desktop got HDMI port, you may try this. ( since your video is fine now, no need to do anything on video )

Configuring audio for HDMI
To configure HDMI audio, first connect an audio or video device, such as a high-definition TV, to the
HDMI port on your computer. Then configure the default audio playback device as follows:
1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then click
Playback devices.
2. On the Playback tab, click either Digital Output or Digital Output Device (HDMI).
3. Click Set Default, and then click OK.

To return audio to the computer speakers, follow these steps:
1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then click
Playback devices.
2. On the Playback tab, click Speakers.
3. Click Set Default, and then click OK.

Based on user manual (pg 34), you need to connect to HDMI1 port of your TV for PC audio

In user menu, go to SETUP > AV Connection, you will see the setting for PC/HDMI1. Select "PC" for the audio input.

Thanks for all the reply, I think my hdmi on my desktop does not support audio,I am using hdmi 3 at my LCD n connect the audio to my AVR so the sound was coming out from my AVR , it is any solution that my LCD could play both audio n video?

When i boot up my desktop, I can't view BIOS or any display.

But once booting windows, I can see the windows starting up.....

Sifu....please advise.

Then you may need another audio cable to connect directly from your PC to the PC/HDMI1 Audio port at the back of the tv

---

Added on July 29, 2010, 7:32 pmI guess since the OS was just started to boot up where your PC display card driver has yet to be loaded and fully running, there won't be any signal sending to the TV. That's could be why you could only see it when windows booted up and all drivers and system files were running during windows startup.

This post has been edited by darenlks: Jul 29 2010, 07:32 PM

Toshiba LED Tv 42XL700E RM 5999 RCP

But why monitor can see but not TV ?