Sure there is a 'puk' even you turn it off via remote control (volume fade out slowly) then you press the on/off switch behind the subwoofer.

just bought R501 yesterday...
got dis prob...
my output for SL & C seems has changed to each other...means that the output of the centre located at SL while the rear left is at C...why???

one more thing...my right rear seems isnt produce sound...
the satellite is okay...i oredi tested it...ma
it seems the output at the subwoofer have prob....
do u have same prob???

if i send warranty...when will i get the replacement/repaired R501???

thanks u!!

i get a feeling that i heard crack sound coming from my subwooferr but if i lift it up using my hand, i cant hear those crack sound owh yeargh...just paired it up with philips aurilium...really satisfied with the speaker and the soundcard

u guys cant imagine using r501 with internal sc for 1 years but now got crack sound pula owh yeargh....this crack sound just recently happen after a week using philips aurilium....hurmm...any ideas?

This post has been edited by death_nite: Sep 7 2006, 01:43 AM

try to update the latest driver for ur sound card.

dude! erh..pls reread my post its not driver probs...y? cos when i lifted up my subwoofer with my hand n hold it, no crack sound... i repeat the same song over n over again to make sure its not driver probs...

This post has been edited by death_nite: Sep 8 2006, 12:37 AM

u can send ur speaker to Low Yat Plazza 4th floor to check.
(When u buy this speaker??)

I just bought r501mkII through direct com last week. The sats were good but the sub was booming. However it is more powerful than my old altec vs-4121. (This is my 3rd edifier after r201 and r401)
I was having the same output problem and later found out that one of the colour coded cables doesn't match with my sound card's color coded input. I'm using soundblaster 5.1 live and my connection are as follows

1. Green cable from green input (sub) to green output (sound card)
2. Black cable from orange input (sub) to orange output (sound card)
3. Orange cable from black input (sub) to black output (sound card)

Hope that helps

Follow the words writen on the manual and sub, make your self a color blind will helps

dammit.how come i dunno must terbalikkan the black n orange cable at sb live 5.1 then only can use!!! i could hv save up more than rm400 instead of buying another new high end card. nevertheless i m hepi with it though.

This post has been edited by skylinegtr34rule4life: Oct 8 2006, 10:56 AM

anyone know where to buy the speaker stand for r501 MKII??? beside the one selling in edifier showroom model,still got any other choice??? i saw in IKEA got sell the speaker stand ,but not sure whether can use in r501 or not........thx for help

Can, but need something to stick it on..

how to say??? ant example?>

Sorry for the typo error. The correct connection are as follows

1. Green cable from green input (sub) to green output (sound card)
2. Black cable from orange input (sub) to BLACK output (sound card)
3. Orange cable from black input (sub) to ORANGE output (sound card)

Use #m tape or if the stand have a mounting on the back then its better, as in my mind, IKEA stands only have base, so you need 3M double sided tape help

Correct, follow the instruction but not colour..

ic~~~thx for helping

OMG end of semester, i dunno how to pack these speakers!!!!

This post has been edited by pk Tokan: Oct 27 2006, 12:22 AM

i dunno y, my system doesnt give out enuf bass. Always kalah to the AtLec Lansing V4121 crap.

Whats your speaker model?
What sound card?

Good new to R501 user. The R501 speaker stand is now availble at our showroom. For those who are looking for the stand u can get it fr our showroom now.

Now Edifier stand available