no, check our the shape (bentuk) of the Mitsubishi cyclone manifold.
that triangular shape... looks familiar?





This post has been edited by masao343: Nov 11 2009, 12:05 PM

wow, cool lei.... like this design?

(suck) lol

if u mean not changing the engine oil after 5000km then build-up of sludge, lubrication characteristics of the oil will decline, resulting in engine friction, wear or even damage in the long run.

depends on how big is the crack.
small crack = cant feel
large crack = no "pickup"

unless he got a very very valid reason to do so, it is very wrong. advise u to stop going to such shitty shop in future.
both rear tyres should be shifted to the front in a "cross" manner (left-rear to right-front, right-rear to left-front)
depend on ur tyre condition, if ur threads are very uneven, now u will have better grip in the wet on one side of the car - very dangerous!
i also wonder if ur mech bothered to check the rotation direction of ur tyres before he swapped

This post has been edited by masao343: Nov 12 2009, 10:06 AM

Happy Birthday Alvin!



(updated: this cake better)

This post has been edited by masao343: Nov 12 2009, 10:07 AM

he installs a time-bomb inside the car, so if u dont pay him, later he detonate the bomb muahaha *evil laughter*

cheeann u very scary lei pls dont make cheeann angry!

guys, wanna ask. is it difficult to change the foot pedals for our wira? can it be done DIY style?
what types can we change to? only from MMC cars, or can use from other cars too?

This post has been edited by masao343: Nov 13 2009, 09:17 AM

lengzai, nei yao mai mou?
how do you install if u dont drill? i tot the mugen one must drill for gas pedal?
pls advise, thanks!



This post has been edited by masao343: Nov 13 2009, 11:43 AM

hmm, u r right. if the pedal stuck or something, very dangerous hor

anyway, who wanna race with this car? sure lose... check out his exhaust, hohoho... V12 engine inside

how come i nvr notice tat 2 lubang? pai-sei....
i also wanna look closely at my pedals later
do u remove the rubber pads from the brake/clutch pedals first?
(u got sell or not, pedals for wira MT?)

This post has been edited by masao343: Nov 13 2009, 12:09 PM

hmm since u say like tat, ok, i ask him la.
JH pls later show the photos, can? i wanna see how it looks and the distance when installed on Wira MT.
thanks!!!

cannot fit, unless u mod the knuckle.
satria neo's PCD is 114.5 while our wira is pcd 100.

go have your wheel bearings checked. should be worn bearings.

wow, before and after.... totally different beasts!
that blue is nice, how much was the painting?
i'm planning to change my car's colour too next year end. possibly to full white

no la... planning on plain white only, cheaper rite?
coz i not rich... furthermore, plain colours are easier to maintain (i hope?)

your blue is metallic or considered plain blue?
coz trying to compare the prices lor (salarymen like myself, hai...)
u say narrow places means the "celah-celah" like when u open car door, can see old paint?

yours got pearl dust is rm1500 means if i really ask for plan white, should be a lot less?
i'm hoping below 1k i can settle everything, coz i need to do some "tampal" on my skirtings also.
the rivet holes kinda ugly... also, did u knock ur car to remove small small dents too? all those included in your price?
sorry if i ask a lot, coz i really wanna plan how much to prepare...

ei... CPS engine can mount into wira engine bay?

coz when those ppl implant a MMC engine, their old one i buy off their hands cheap cheap ma

this guy trying to sell the fake turbo whistle, so ignore that part.
but i think the flame thrower kit is cool. wonder how much to get it installed also (can BBQ when hungry)
wa... so many things so nice (but so little money!)


This post has been edited by masao343: Nov 13 2009, 05:31 PM

cyber workshop (ala cyber cafe)