me also not yet reach pro noob yet...

Can show someone show me how to hold the 24pin behind the motherboard tray ? Mine keep getting off its position and cause the panel unable close

most important thing is the heatshrink.
need to cut it the same length and straight then align correctly.

good work on the sleeving job owi. looks freaking neat. very hard to achieve with mdpc sleeves.

custom length 2mm tight weave sleeving for my pci-e connector. more to come

This post has been edited by supernothing: Jun 7 2011, 09:35 AM

but yours dont have heatshrink?
is that heat shrink something that must-have?

it's 2mm sleeving, have to custom made every single wire. crimp the contacts together with the sleeves.

require lots of patient

Well done supernothing
I thought niclas said it's 3mm ID? your sleeve is even thinner.
hard to get a good result with MDPC coz its sleeve and heatshrink are fatter than the weave type. Not easy to stuff those thick ends into the connector.

Btw bro curious ur weave heatshrink can be used on MDPC sleeve or not?

This post has been edited by owikh84: Jun 7 2011, 01:57 PM

@owi i didn't get this from niclas. and not using any heatshrink either. this is coldzero sleeving. it's freaking small. requires a lot of patience just to insert the wires into the sleeves. crimping also another pita.

the learning curve is about 2 hours a lot of patience, and mistakes required.

the sleeves are small enough that you can sleeve the usual mdpc way and have the sleeve + heatshrink in the connector. but because the sleeves are so small and tight, it's pretty hard to push the wires + metal contactor into it.

moar pictars.







haven't finished my sleeving works yet. waiting for some sata stuffs from niclas. will post the completed work once it's finished.

wha bro.. where u got that small sleeve from...? anyone selling..?

This post has been edited by kakicam: Jun 7 2011, 08:49 PM

bought it from coldzero, portugal. they have an online shop. http://www.coldzero.pt

This post has been edited by supernothing: Jun 7 2011, 11:07 PM

FIXED

damn nice..

swt!!

anyone provide sleeving service for psu? i don't mind to pay them for the help.

i'm using an old FSP 700W modular psu with fixed cables. meaning to say, they're not detachable as today's psu. so, it's kinda cluttered with all the cables.

I've seen Niclasteoh to be da best sleeving service privider.
Pls check out his threads for da results. It looks perfect to me.

yup ... but be prepare.. dont expect to get it cheap as the cost itself is already high

yes, hv to admit that it's not cheap but still didn't hit RM100 though.

you get what you pay for. the cost of sleeving the wires yourself might be more expensive than just buying it from niclas. i bought some custom length sleeved cables from niclas before, best workmanship in this forum i must say.

I strongly agree with u coz i also got one extension cable sleeved by niclas as well and i reallly love it. I challenged myself to beat or at least match his workmanship but couldnt make it lol. Think i need more practices. Jz grabbed several cable stuffs from niclas today want ti make fan Y splitters for GTs.