He already mentioned it's too short.
When buying a new PSU I will make sure that this cable is long enuf to connect to my mobo.
And I find Corsair PSUs cable length is adequate

Actually u all could remove one of the [/quote] tags from the post.

my noob sleeving job


too messy...


This post has been edited by owikh84: Jun 6 2011, 10:40 PM

most important thing is the heatshrink.
need to cut it the same length and straight then align correctly.

Well done supernothing
I thought niclas said it's 3mm ID? your sleeve is even thinner.
hard to get a good result with MDPC coz its sleeve and heatshrink are fatter than the weave type. Not easy to stuff those thick ends into the connector.

Btw bro curious ur weave heatshrink can be used on MDPC sleeve or not?

This post has been edited by owikh84: Jun 7 2011, 01:57 PM

FIXED

I've seen Niclasteoh to be da best sleeving service privider.
Pls check out his threads for da results. It looks perfect to me.

yes, hv to admit that it's not cheap but still didn't hit RM100 though.

I strongly agree with u coz i also got one extension cable sleeved by niclas as well and i reallly love it. I challenged myself to beat or at least match his workmanship but couldnt make it lol. Think i need more practices. Jz grabbed several cable stuffs from niclas today want ti make fan Y splitters for GTs.

Labour cost only. Sleeving kit is self prepared keke.
I cant really comment on their quoted price coz it depends on their cost price for sleeves+heatshrink+labor etc.
For cable sleeve length u can always go to jonnyguru to check. eg. for Corsair AX1200

ATX connector (0.6m) 24 pins x 1 = 0.6 x 24 ~ 14.4m
EPS12V/ATX12V connector 8pins (0.61m) x 1 = 0.61 x 8 = 4.88m
PCIE 6+2pins (0.6m) x 1 = 0.6 x 8 = 4.8m
Molex 4pins and SATA cables can be left unsleeved.

For instance my SLIed GTX580 needs a total length (without Molex & SATA) ~ 38.48m sleeve; heatshrink 10%
For safe side, grab 4 sets of 10m MDPC-X sleeve+ 1m heatshrink = RM45x4 = RM180.

so depending on how many GCs and ATX8 needed u could roughly calculate the total length of sleeves for ur rig.



His pocket is super deep I wont be surprised if he's willing to offer more than that.
But I'd find niclas anytime, due to strong friendship between us. Moreover he got all the materials needed for a complete sleeving solution.

This post has been edited by owikh84: Jun 9 2011, 08:15 PM

can get some dust filters specially designed for HAF-X bro
http://www.performance-pcs.com/catalog/ind...oducts_id=28942

Dual ATX 24pins adapter cable custom made by niclasteoh => 100% satisfied!

dual PSUs.
so that i could push the power button one time to power up two PSU simultaneously.

Good news for Corsair PSU owners, now you can buy individually sleeved cable kit separately.

RM3xx for AX1200 i'd say quite worthy, considering the cost needed for sleeve+heatshrink + time for the whole sleeving process.

http://www.corsair.com/power-supply-units/...ccessories.html

Thumb up to Corsair for listening to buyers.

No idea on time of availability.
You might wanna check with Legend86 <= Corsair Freak

Saw an ad on top banner of LYN

http://www.moddiy.com/news/5/High-Quality-...lar-Cables.html

So in no time I've dropped them an email inquiring quotation for a custom length-sleeved for AX1200