Welcome Guest ( Log In | Register )

120 Pages « < 22 23 24 25 26 > » Bottom

Outline · [ Standard ] · Linear+

 ASUS k40AB/k50AB v2, Good budget laptop w/HD4570

views
     
kucingfight
post Nov 7 2009, 05:36 PM

Look at all my stars!!
Group Icon
Elite
5,784 posts

Joined: Jan 2003
From: Shah Alam



yeap on k50ab.

8vvt (on k50ab) has some issues too..where regardless of any bioses, he doesnt seem to hav the option of toggling btwn power express & dgpu. only dGPU all the time
aiklone1314
post Nov 7 2009, 05:46 PM

Getting Started
**
Junior Member
59 posts

Joined: Jun 2008


why i using cpuid to check my ram,it shows..

Memory Information :
Type : DDR2-SDRAM PC2-5300
Frequency : 333.2 MHz
DRAM/FSB Ratio : 5/3
Supported Channels : Dual (128-bit)
ECC Diagnostic : No
CAS Latency (tCL) : 1 clocks
RAS to CAS (tRCD) : 3 clocks
RAS Precharge (tRP) : 3 clocks
Cycle Time (tRAS) : 3 clocks
Bank Cycle Time (tRC) : 11 clocks
Command Rate : 1 T
Shared Memory (video) : Yes

not pc2-6400 one?
NaGeNaZ
post Nov 7 2009, 05:58 PM

MS03-GNX001
*****
Senior Member
783 posts

Joined: Apr 2005


The problem with switching starts when i update the graphic driver. After windows login, the screen went blank, so end up using dGPU.
So far any noticeable battery life with HD3200 & HD4570 on K50AB? Coz i am losing 1% battery life for every minutes of movie. In average my battery just gave me 100 minutes of normal usage with 0.9v

This post has been edited by NaGeNaZ: Nov 7 2009, 05:59 PM
Batusai
post Nov 7 2009, 06:01 PM

Weeeeeee
*******
Senior Member
2,066 posts

Joined: Oct 2007


QUOTE(kucingfight @ Nov 7 2009, 05:36 PM)
yeap on k50ab.

8vvt (on k50ab) has some issues too..where regardless of any bioses, he doesnt seem to hav the option of toggling btwn power express & dgpu. only dGPU all the time
*
he has the ql65 version.. might be new hardware i guess.. his set dont even have to option so switch..

now its the ql64 version.. with the ability to choose the VGA type... but it doesnt detect the hardware..
kucingfight
post Nov 7 2009, 06:01 PM

Look at all my stars!!
Group Icon
Elite
5,784 posts

Joined: Jan 2003
From: Shah Alam



QUOTE(NaGeNaZ @ Nov 7 2009, 05:58 PM)
The problem with switching starts when i update the graphic driver. After windows login, the screen went blank, so end up using dGPU.
So far any noticeable battery life with HD3200 & HD4570 on K50AB? Coz i am losing 1% battery life for every minutes of movie. In average my battery just gave me 100 minutes of normal usage with 0.9v
*
yeah i was doin 100 mins too on movie watching. on dGPU. tryin HD3200 later
kuroda1226
post Nov 7 2009, 06:05 PM

Getting Started
**
Junior Member
203 posts

Joined: Oct 2009
QUOTE(aiklone1314 @ Nov 7 2009, 08:00 AM)
o...maybe i see wrong place...
but why the effective clock of my everest shows only 647, not 667?  shocking.gif


Added on November 7, 2009, 8:06 am
i bought k40ab few weeks ago...
haven do any update on the bios till now...
actually what is the benefit in updating the bios? icon_idea.gif


Added on November 7, 2009, 8:10 ammay i knows why sometimes when i shutdown my computer,just a second before the computer completely close, it make some noice (e.g jiza jiza) like it is going to burn out...
but when i start it again no problem at all...
it is likely comeout from the built in speaker of the notebook...
anyone encounter this problem before on k40ab?
*
for i using k40ab ql64 update the bios can fix the computer wake up from sleep mode..
that is 1 of d bios update..update bios is fix d bug issue on d hardware ..sumthg lk tat..
the sound u hear smthing lik buzz buzz is driver..u should update to new sound driver(via)
Batusai
post Nov 7 2009, 06:08 PM

Weeeeeee
*******
Senior Member
2,066 posts

Joined: Oct 2007


QUOTE(kuroda1226 @ Nov 7 2009, 06:05 PM)
for i using k40ab ql64 update the bios can fix the computer wake up from sleep mode..
that is 1 of d bios update..update bios is fix d bug issue on d hardware ..sumthg lk tat..
the sound u hear smthing lik buzz buzz is driver..u should update to new sound driver(via)
*
and the bios update enales u to control ur brightness in dGPU mode..

some sets have problem with the buzz buzz thing when installed srs.. thats wad happened to mine.. i installed srs and now its working fine..
kuroda1226
post Nov 7 2009, 06:10 PM

Getting Started
**
Junior Member
203 posts

Joined: Oct 2009
i using the k40ab bought in august d..
my bios from 203>213>216 is work fine...there is still a option to choose the graphic card...dunno y other cant choose..
but nw using win7 i haven tried switch yet..
Batusai
post Nov 7 2009, 06:16 PM

Weeeeeee
*******
Senior Member
2,066 posts

Joined: Oct 2007


QUOTE(kuroda1226 @ Nov 7 2009, 06:10 PM)
i using the k40ab bought in august d..
my bios from 203>213>216 is work fine...there is still a option to choose the graphic card...dunno y other cant choose..
but nw using win7 i haven tried switch yet..
*
ah.. so its working for u.. are u on powerxpress or dGPU??
aiklone1314
post Nov 7 2009, 06:22 PM

Getting Started
**
Junior Member
59 posts

Joined: Jun 2008


QUOTE(Batusai @ Nov 7 2009, 06:08 PM)
and the bios update enales u to control ur brightness in dGPU mode..

some sets have problem with the buzz buzz thing when installed srs.. thats wad happened to mine.. i installed srs and now its working fine..
*
may i know what is srs? blink.gif


Added on November 7, 2009, 6:23 pm
QUOTE(kuroda1226 @ Nov 7 2009, 06:10 PM)
i using the k40ab bought in august d..
my bios from 203>213>216 is work fine...there is still a option to choose the graphic card...dunno y other cant choose..
but nw using win7 i haven tried switch yet..
*
got 216 for k40ab?
i cant find from asus website.only 213.. shakehead.gif

This post has been edited by aiklone1314: Nov 7 2009, 06:23 PM
NaGeNaZ
post Nov 7 2009, 06:25 PM

MS03-GNX001
*****
Senior Member
783 posts

Joined: Apr 2005


QUOTE(aiklone1314 @ Nov 7 2009, 06:22 PM)
may i know what is srs?  blink.gif


Added on November 7, 2009, 6:23 pm
got 216 for k40ab?
i cant find from asus website.only 213.. shakehead.gif
*
Got removed for unknown reason.

This post has been edited by NaGeNaZ: Nov 7 2009, 06:30 PM
Batusai
post Nov 7 2009, 06:26 PM

Weeeeeee
*******
Senior Member
2,066 posts

Joined: Oct 2007


QUOTE(aiklone1314 @ Nov 7 2009, 06:22 PM)
may i know what is srs?  blink.gif


Added on November 7, 2009, 6:23 pm
got 216 for k40ab?
i cant find from asus website.only 213.. shakehead.gif
*
SRS.. one of the audio driver.. u can find it in the stock driver installation cd...

216 was released around 2 months ago... but now asus has removed it... no idea why.. now only 213 is available..
GothFebrio
post Nov 7 2009, 06:32 PM

too long...did not read
******
Senior Member
1,304 posts

Joined: Jan 2009
From: Kuala Lumpur


QUOTE(aiklone1314 @ Nov 7 2009, 05:46 PM)
why i using cpuid to check my ram,it shows..

Memory Information : 
Type : DDR2-SDRAM PC2-5300
Frequency : 333.2 MHz
DRAM/FSB Ratio : 5/3
Supported Channels : Dual  (128-bit)
ECC Diagnostic : No
CAS Latency (tCL) : 1 clocks
RAS to CAS (tRCD) : 3 clocks
RAS Precharge (tRP) : 3 clocks
Cycle Time (tRAS) : 3 clocks
Bank Cycle Time (tRC) : 11 clocks
Command Rate : 1 T
Shared Memory (video) : Yes

not pc2-6400 one?
*
doesnt matter. because its running at 667Mhz too. but urs is better. lower latency.
kuroda1226
post Nov 7 2009, 06:32 PM

Getting Started
**
Junior Member
203 posts

Joined: Oct 2009
hmm..i am back..
jz nw i try swicth to 3200 at bios and i success go into window..
after that the window automatic help me install driver n i restart.
(still in power express mode)
after that i got the power express change at the right click at desktop,but it seem no work..the ati CCC detect is hd3200,but not show hd4570 at CCC..
(previously it got show at vista).
and i using the gpu check,i check it show the 3200 but it seem not running and show temp,n i check 4500series(it show after automatic install) it run and got temperatue...
now i swicthing bec to dgpu mode..the right click express switch mode is gone,and ati CCC show my 4570 is 4500series...


Added on November 7, 2009, 6:36 pmand i got the 216 bios if u wan...u can put ur email n i will attach to u..
but flash at ur own risk,i dun responsible it..hehe
i download it when it release last time..
before that i using mod drive it will show HD4530/4570 at CCC but now it show 4500series does it will decrease performance??
>.<


This post has been edited by kuroda1226: Nov 7 2009, 06:36 PM
GothFebrio
post Nov 7 2009, 06:37 PM

too long...did not read
******
Senior Member
1,304 posts

Joined: Jan 2009
From: Kuala Lumpur


QUOTE(kuroda1226 @ Nov 7 2009, 06:32 PM)
hmm..i am back..
jz nw i try swicth to 3200 at bios and i success go into window..
after that the window automatic help me install driver n i restart.
(still in power express mode)
after that i got the power express change at the right click at desktop,but it seem no work..the ati CCC detect is hd3200,but not show hd4570 at CCC..
(previously it got show at vista).
and i using the gpu check,i check it show the 3200 but it seem not running and show temp,n i check 4500series(it show after automatic install) it run and got temperatue...
now i swicthing bec to dgpu mode..the right click express switch mode is gone,and ati CCC show my 4570 is 4500series...


Added on November 7, 2009, 6:36 pmand i got the 216 bios if u wan...u can put ur email n i will attach to u..
but flash at ur own risk,i dun responsible it..hehe
i download it when it release last time..
before that i using mod drive it will show HD4530/4570 at CCC but now it show 4500series does it will decrease performance??
>.<
*
it will not decrease the performance. 4570 is under 4500 series.
kuroda1226
post Nov 7 2009, 06:44 PM

Getting Started
**
Junior Member
203 posts

Joined: Oct 2009
haha...the left is let u all discuss....who wan 216 can ask from me...but flash at ur own riskk..
Batusai
post Nov 7 2009, 06:58 PM

Weeeeeee
*******
Senior Member
2,066 posts

Joined: Oct 2007


kuroda check ur pm.. i have mailed u my add... please send me both the 213 and 216 u have.
kuroda1226
post Nov 7 2009, 07:00 PM

Getting Started
**
Junior Member
203 posts

Joined: Oct 2009
ya send ady...
niZtelrooij
post Nov 7 2009, 08:00 PM

New Member
*
Junior Member
6 posts

Joined: Jan 2009
i just bought k40ad last week from johnjay

but i hv a question

is it ok to install only ati tray tool.

or install both with CCC?

i try to play fifa on9 2 but not on full screen. why ah?


aiklone1314
post Nov 7 2009, 08:22 PM

Getting Started
**
Junior Member
59 posts

Joined: Jun 2008


QUOTE(niZtelrooij @ Nov 7 2009, 08:00 PM)
i just bought k40ad last week from johnjay

but i hv a question

is it ok to install only ati tray tool.

or install both with CCC?

i try to play fifa on9 2 but not on full screen. why ah?
*
go back to 1st page. got teach to solve this problem. rclxms.gif


Added on November 7, 2009, 8:23 pm
QUOTE(aiklone1314 @ Nov 7 2009, 08:22 PM)
go back to 1st page. got teach to solve this problem.  rclxms.gif
*
for ur convenient:

http://forum.lowyat.net/topic/1022386 laugh.gif


Added on November 7, 2009, 8:30 pm
QUOTE(kuroda1226 @ Nov 7 2009, 06:05 PM)
for i using k40ab ql64 update the bios can fix the computer wake up from sleep mode..
that is 1 of d bios update..update bios is fix d bug issue on d hardware ..sumthg lk tat..
the sound u hear smthing lik buzz buzz is driver..u should update to new sound driver(via)
*
but i already downloaded the lastest version audio driver.

Version V6.0.1.7333

Description VIA Audio Driver
VIA Audio Driver for Win7 32/64 bit

rite?

This post has been edited by aiklone1314: Nov 7 2009, 08:30 PM

120 Pages « < 22 23 24 25 26 > » Top
 

Change to:
| Lo-Fi Version
0.0273sec    1.06    6 queries    GZIP Disabled
Time is now: 4th December 2025 - 08:02 PM