guys... i just got the solution for scaling problem in windows 7 .. after googling for hour.. huhu

here the step for display scaling in windows 7 using ati radeon base GC...

please use driver from this website

http://www.donotargue.com/page.php?id=1104 (Currently Not Working)

Collection of ATI Modded Driver (New Link)

download the latest driver available

1. first uninstall you installed driver

2. start the installation using DNA.bat

3. that you will see a option like this.



select option number 6 and wait untill it done.

4. reboot.

5 go back to DNA.bat and install option 9 for driver ReadyDriverPlus and use the default option.

6. open the resolution windows

7. Change your monitor resolution to 1280x768 or any res below the native one (Under Display Properties)

8. Open up ATI Control Panel

9. go to Notebook Panel Properties

10. select "Full Screen Scaling Options" (2nd option)

11. Click on the "Apply" button

12. In the confirmation window click "Apply"

13. Enjoy Full Screen Stretched For Games and Desktop

NOTE : im using ati mobility radeon HD 2300 and custom driver version 9.2 from do not argue (DNA)

for nvidia im not yet test this method cause i dont have any nvidia gc now.. but i think its quite similar..

try select "Use NVIDIA scaling with fixed-aspect ration" (2nd option)

hope this help you guys that have problem with games on windows 7..



UPDATE ON SOLUTION FOR SCALING PROBLEM IN WINDOWS 7 USING NEWEST DRIVER FROM ATI ( version 9.9 and above)

1. Install the latest ATI driver from ati website HERE and ATI Mobility Modder from HERE



2. Right click the desktop and click on the SCREEN RESOLUTION



3. Change you desktop resolution below your recommended screen resolution and click apply



4. open your ATI catalyst control panel, go to Desktop and display, and then, click on your display configuration.



5. at scaling option, select full screen and click apply and the click ok



6. after done, set back you screen resolution to the one that recomended



7. Enjoy you game at full sreen scaling..

This post has been edited by syahpian: Dec 12 2009, 03:50 PM

lol i tried ady but i not really know how to use..
after installed the readydriverplus...it will come out in bootloader
then if i choose to boot readydriver...it will ask me to repair my window...
if i choose window 7...i cant see any ati driver

actually readydriverplus main function is to disable Driver Signature Enforcement (DSE) on both windows vista and windows 7, sometime windows will block modded driver. you just install using default setting.. when it boot, it will automatically select readydriverplus first when select windows 7 and select disable Driver Signature Enforcement and its done automatically.

firstly, uninstall you old driver first, then install using DNA 9.2 driver. cause from my past experience, you have to use both driver and readydriverplus
cannot use any other driver.. that the driver supply with the package.

P.S: unequalteck, can i know what model of ati GC u are using now? is it using pci-e or agp interface?

This post has been edited by syahpian: May 8 2009, 11:08 AM

i uninstalled the old 1 ady..
using laptop..
ati mobility radeon hd 4570

ok.. do not install readydriverplus (skip step number 5) but have to manually select "disable Driver Signature Enforcement" on boot option

if you dont mind.. can i ask you.. are you using dual boot windows or just singel boot?

cause in many situation.. readydriverplus have difficulty to boot on dual boot windows environment..

This post has been edited by syahpian: May 9 2009, 07:27 AM

If you want to enter the boot option menu, press F8 before the Windows starts to load. Then select Disable DSE.

thanks Demonic Wrath

is there anyway to disable DSE without need to push F8 everytime?
u might forgot it and i found this is quite annoying...

you can use this method to automatically disable DSE..


"This method works from within Vista and windows 7 so the instructions are the same whether single or multiple operating systems are present.

Click Start, then in the Search box type "cmd". You will see an icon for the command prompt appear in the Programs section. Now right click it and click "Run as administrator".



You will now be presented with a DOS window and command prompt. At the prompt, type the following:

"bcdedit -set loadoptions \DDISABLE_INTEGRITY_CHECKS”



and press enter. Notice there are 2 D's for disable, this is intentional. Now reboot the PC and try to install the driver again. "

please comment on this method.. its it work for you or not... cause i just remove my readydriverplus and test this method. its work very well for me..



This post has been edited by syahpian: May 9 2009, 07:29 PM

unfortunately sir, it didnt work
im using ReadyDriverPlus instead
well, as long its working, i shouldnt bother
thanks anyway

---

Added on May 10, 2009, 4:08 pmoops, i take it back, installing ReadyDriverPlus didnt help
it create another boot option and never load to windows 7 OS

This post has been edited by ultimaweaponx: May 10 2009, 04:08 PM

can you give me you screenshot for the newest method? i mean the cmd windows.. i just want to conform what message you get after you press enter

and if posible.. i want screen shot for ReadyDriverPlus..

maybe there some error i need to know.

and can you tell me more about problem and error you get?



This post has been edited by syahpian: May 10 2009, 04:36 PM

ok sorry
heres the update
after i uninstalled the ReadyDriverPlus and put the command like u did, it get through

btw, ReadyDriverPlus was working fine on Build7000 on my lappy, not on this desktop (Build 7100)

i see.. very happy to hear that..

what i know is.. ReadyDriverPlus only work when u are using single boot and clean install windows..

cause when you using dual boot, ReadyDriverPlus dont know which windows to boot .. huhuhu.. that really painful to me at first.

when i discover the second method. i test and its work very well for me

can i know which GC are you using now? are u already test you windows 7 with games?

This post has been edited by syahpian: May 10 2009, 05:12 PM

here


actualy i just got this 4670 G/C very cheap last month
so far only with GRID, with 8XAA 1680px without lag
now waiting a proper driver that can unleash Hybrid Crossfire with my 780G chipset mobo

---

Added on May 10, 2009, 5:35 pmoh yeah, btw thanks

This post has been edited by ultimaweaponx: May 10 2009, 05:35 PM

WOW!!!!

great GC you have there.. Bump for you..

im only using mobility radeon HD 2300.. its allready okey for me..

now playing the last remnant at medium setting, with full screen scaling and 1280*800 resolution.. huhuhu no lag for me so far.. huhuu

hi all, do you guys face the problem windows 7 shutdown automatically..?

i'm playing grid with medium setting only.. but dono why the computer will shutdown itself...

have you check you cpu, memory, gc or mobo? i guessing that your cpu is overheating or you get memory error or you have problem wit you mobo..

care to tell me you full pc spec?

i guess it might be overheat.. coz this few weeks also very hot and spicy weather..

my PC spec:
intel q9450
gigabyte ep45-ud3r
his hd4850 iceq4
corsair gamming ram 2 x 2gb
200gb maxtor hdd(4 yrs old)
enermax modular 620w PSU

this is my setup.
all using stock cooler, casing side panel opened, with a table fan blowing beside..

This post has been edited by syahpian: May 12 2009, 06:47 PM

have you try to configure you power option setting?


go to start -----> control panel ------> power option ------> any plan you use ( im using high performance plan) -----> change plan setting -----> change advance plan setting

and after that you will see option like this



set both on the system cooling policies to active..

some note for system cooling policies

"System Cooling Policy lets you change the cooling mode of your system. There are 2 options available here. Active increases the fan speed before slowing the processor to maintain cooling, while Passive slows down the processor before cooling the fan speed. Passive saves a lot more power as it reduces the clock on your processor, hence giving your more battery time."

if this method dont work, maybe you have you clean you casing from dust or put on new Thermal Paste for you processor..

This post has been edited by syahpian: May 12 2009, 06:48 PM