Most lower-mid range Yamaha speaker i see are usually 6 Ohms. At least the few model i audited.

perhaps u can contact anfieldude for AV consultation.

for yamaha AVR, large speaker means low frequency (mainly bass) will be played at each own channel, without being pass to subwoofer.
subwoofer will only work for its own 0.1 channel.

if u set to small, low frequency from satelite speaker will be pass to subwoofer, make sound together with original subwoofer channel.
crossover setting is to control which frequency point to be pass on sub.

when u set crossover to very high, satelite may sound clearer because less bass give less strain on amp and speaker.
but sub will give muddy or boomy sound, so u might need to play with sub volume and adjust the crossover accordingly.

Do the sub crossover adjusting base on the front speaker lowest hz ? overlap abit or some figure? After that adjust the sub volume?

Hohohoooo.....give me your speaker, haha...

do try out with every possibility.
i find overlap abit give clearer sound because bass already pass to sub
leave more overhead power on amp and speaker to play loud.
now using 120hz to little 4" front speaker
perhaps u can adjust the YPAO mic position more backward to prevent being detected as large

as you know 5.1 and 7.1 movie got independent SW channel called 0.1
when play normal content without 0.1, SW will not work as no sound is feeded, if all are detected as large (crossover disable)
it is almost work like pure direct mode

hehe, 80hz is a reference crossover for THX cinema.
good if u like this setting.

haha...mine is even worse kuah.....from Sony mini compo + Yamaha integrated.

come to think of it, my bass does sound a bit boomy. i'll play around some more with the crossover level. thanks

+ SW overblown my budget. haha..

Yep, Alpha T1 x1 pair, C1 x1 and 100watt SW. So far, no problems, no clipping whatsoever.

Congrats. Welcome to the "real sound for real people" club

How much, brother?

How is the sound?  Not expensive, compared to Yamaha slim 210 already RM1.5k.

eh....thought yours is 5.1.  My current simple 5.1 still boleh tahan lah...

2.2K is for 5 pcs speaker or 3?

Wah...+ve zone ah...No one complain kah?

Mine 673 + sw315 sub + jamo 606
Excellent value for money
You can get the whole system around 4600 now

You plan to have 5.1 or 7.1?

Planning to buy a home theater system, my house is going to start renovation this week. Has aimed for 473 setup with yamaha speakers budget around 3.5K-3.8K. The sales person in HN advised me to get the speaker cables installed first and he has the source to for RM7.00 per meter, how do you think? What speaker cable are you guys using and where to buy it? Hope to get advise from sifu-sifu here. Cheers.