if no one to one exchange then too bad. ur in jb rite? iirc alphamatic got branch there. do try ya luck. if they got stock, should be able to do one to one exchange.

yup, to unlock, u gotta put ht multiplier @ 8x a.k.a 1600.

stock fan is as gud as nothing if u wanna unlock + oc. get a 3rd party cooler. cheap one like cm hyper 212+ will do d job, if want cheaper, go for tx3.

i mean i want change it to auto.
now it looks like 100% fan speed.
noisy.

by default it should be auto, d fan spin 100% coz d chip is hot, need to spin faster to lower down d temp. that's d logic...

This post has been edited by ah_khoo: Sep 30 2009, 10:46 PM

oic,using default.

eh guys does using HDMI output on your GC to power HDMI LCD cause the FPS to drop ? even if the resolution is still 1920x1080 ?

can teach me how to ulock 550 be step by step ?

ur board i think need modded bios, i heard that before
@ah_khoo where the office?? landmark?

This post has been edited by duncan880409: Oct 1 2009, 12:33 AM

i read a lot thread .
but i still not sure how to unlock.
can teach me plz.
i just tried and my pc cannot on.
and i reset the bios.

u flash the bios edi?seek the same bios as i posted at 1st page..or get newer mod bios..
try seek at xtremesystem... i cant find the bios source since my connection too dem slow..

after flash bios... using MSI live updater i guess..then seek for the ACC and set at Auto..thats all..(before that need to set at "special"..argh..i fogot..later i unlock again my fren mobo i post to u)
MSI c45 easy..no need to lower HT link whatsoever.. just make sure ur proc having healthy hidden core..if not, then need to tweak abit la

thx for help.
but not manage to unlock.
i din flash bios,must flash bios ?

flash bios is a must if not, u will not have ur proc unlock...
it will stay as 2cores or cant boot..
so that is y ppl mod the bios in order to get the cores unlocked..

these things are compulsory
1. the proc must have locked cores.. (easier if good batch/ healthy cores)
2. bios that able to unlock
3 mobo that have ACC (or NVCC)
4. and ACC enable...(depends auto or all cores or per cores..)

one of this missed out, cant unlock for sure..

1:i m not sure
2:i download w9105vms but don know how to use
3:got acc

successfully unlocked to X4 B50 using asus M4A78-E,but is it ok at the cpu vcore at 1.48 - 1.5V?
lower than this never boot to windows

This post has been edited by villa07: Oct 5 2009, 08:46 AM

What clockspeed?

-pWs-

Increasing vcore helps unlock cores?

Or did you OC your cpu?

nope..clockspeed at the default setting,3.1GHz

Oh? So with your vcore at default you can't unlock your cores? and by increasing it, you managed to??

Cos if that's true, there may yet be hope to unlock my processor!! LOL

@ChaSm
No harm have a try to get extra 2 cores right?

-pWs-

Haha.. That's true.. Shall try it later on..

Just wondering, if i adjust voltage, CnQ will be disabled right?

no news for these stepping?
0930FPMW
0930FPMW
0931GPMW
0931GPMW