AMD® Socket AM2&AM3 Overclocking V19, There's still few beasts hiding...
|
|
 Jul 15 2009, 10:07 PM
Return to original view | Post
#21
|
 
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....  
|
QUOTE(xcen @ Jul 15 2009, 09:59 PM) I think it is quite normal as Phenom II proc are quite cool. My proc idles at around 27C. oic..since my fren proc idles at 36c..cloudwan's also.. u using what board? just notice..same board..27 is below room temp..its water temp i guess... so is there any issue with our board? This post has been edited by kuntawakaw: Jul 15 2009, 10:08 PM |
|
|
|
|
|
Jul 15 2009, 10:38 PM
Return to original view | Post
#22
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(under18 @ Jul 15 2009, 10:10 PM) i'm also idle 35c..nice temp u 2 got nice temp if its true...25 is almost imposible for me... now im idling at 28c..also quite weird... u using what cooler what mobo sir? QUOTE(xcen @ Jul 15 2009, 10:27 PM) I'm just using air cooling CM Hyper TX-2 lol. u increase..i decrease..now run at 3.55ghz 1.26vcore (not yet stable) but the temp realy weird.. i wonder..My overclock is just mild OC, 3.2GHz, with just 0.025vcore increase for better stability. I don't think it's any issue with our board, for me it's quite normal. When stressed it will go up to 41-43C. calling for another ta790gx user..pls... |
|
|
Jul 15 2009, 10:54 PM
Return to original view | Post
#23
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(strife_personified @ Jul 15 2009, 10:34 PM) yeah, for my board 284 was the highest i could go with all the other components at their lowest multiplier. Vcore was +200mv, so the final Vcore was 1.264 according to cpuz. what board u using?nb volt been pump? the mobo volt... i wud love to see that chip run at 3.0ghz at least..huhuhuhthe main limiter with the 9150e is the locked multiplier. without headroom there you're limited by your max FSB, and the highest most can go doesnt need more than 1.3V  QUOTE(cloudwan @ Jul 15 2009, 10:43 PM) Miahaha tabik spring if it's really only 25c cloudwan..ur fotress easy to reach the proc? can u pls to some hand job at the proc ( the point part,that not covered by cooler)..or mebbe the cooler base..i cant sense any heat from there...  |
|
|
Jul 15 2009, 11:23 PM
Return to original view | Post
#24
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(cloudwan @ Jul 15 2009, 10:58 PM) The casing is no prob but its the CCF and fan that's blocking me to do a hand job on my cpu to test the temp i did touch all the heatpipes that very near to the base..and did touch the other side of my proc... also the cooler base -while IBTingonly the slight heat can be detected..deng... im worry bout it.. any 550be + ta790gx user here? pls help |
|
|
Jul 15 2009, 11:34 PM
Return to original view | Post
#25
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ventrilocks @ Jul 15 2009, 11:29 PM) x yh riso...just low vcore will do.. yeah... but if the cooler not well?mean if it sick..hehe crap cooler..cant expect much... and at aod..i can set the cpu and nb-cpu volt..but both will be exactly the same.. the slider will show same value after i apply.. haish..too much prob ar this board..sell off and get a gxe instead. blend = 1sec then 1 worker fail small = can run until i stop at 10mins large= can run until i stopa at 7mins IBT maximum 7loop = pass what is the prob?cpu and ram can run atleast 5mins stable..but if blend then cannot..  here some ss.. » Click to show Spoiler - click again to hide... « it said cant utilize FFT code..what is that? This post has been edited by kuntawakaw: Jul 16 2009, 12:12 AM |
|
|
Jul 16 2009, 12:20 AM
Return to original view | Post
#26
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ventrilocks @ Jul 16 2009, 12:17 AM) blend test is good for testing ur system stable.. everyone knows that...the thing that amuse me is torture run with 0 errors but stopped..and said FFT code cant utilize..means the torture is halted before working... im  Added on July 16, 2009, 12:21 am QUOTE(ventrilocks @ Jul 16 2009, 12:17 AM) blend test is good for testing ur system stable.. everyone knows that...the thing that amuse me is torture run with 0 errors but stopped..and said FFT code cant utilize..means the torture is halted before working... im This post has been edited by kuntawakaw: Jul 16 2009, 12:21 AM |
|
|
|
|
|
Jul 16 2009, 06:40 AM
Return to original view | Post
#27
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(AMDAthlon @ Jul 16 2009, 01:28 AM) Since blend cannot..There must be something wrong with your RAM and NB Frequency tuning.... nope nope nope...i hope u read my post properly...For now..try tweaking the RAM and NB Freq..You gotta try..no matter what  If we dont try..we wont know.. QUOTE blend = 1sec then 1 worker fail small = can run until i stop at 10mins large= can run until i stopa at 7mins IBT maximum 7loop = pass what is the prob?cpu and ram can run atleast 5mins stable..but if blend then cannot.. it said cant utilize FFT code..what is that? small >>>pass..proc stable large>>> pass..ram stable @bolded it stopped before it start... and i just restart, and then primable... i donno for how long...wake up it failed.. and ts..i did mention few times edi.. i know my ram limit edi..and nb freq, i roughly know.. 3.6ghz can up to 27XXmhz..3.8ghz have to lower down to 25XX im tired of burning in... can i just make it 2hrs only? here some ss... my undervolt program.. » Click to show Spoiler - click again to hide... « This post has been edited by kuntawakaw: Jul 16 2009, 08:16 AM |
|
|
Jul 16 2009, 08:38 AM
Return to original view | Post
#28
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ventrilocks @ Jul 16 2009, 08:30 AM) thats makes me blur..the theory is Core speed increase..NB speed must increase too..but in ur situation is different..sometimes need to lower a bit..dunno which one is true..hard to OC in AMD.. i think... nb speed need to increase to able to coupe with the fast proc... so no bottle necking of nb occur..but increase nb will sacrifice stability..so in order to stable at that vcore and nb volt, i lower down the nb freq... i did tried with 28XX at 3.6ghz..its cant even prime at 10mins..lower down abit, i can... correct me if im wrong then |
|
|
Jul 16 2009, 09:22 AM
Return to original view | Post
#29
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(strife_personified @ Jul 16 2009, 08:51 AM) could you post your settings? i'm not sure how the options are in prime 95, but when you use stress prime (which is a prime 95 front end) and you run more than one instance of blend, it does indeed cause one of them to fail due to lack of ram (they both fight for the whole thing, i think). at default... just press blend..i guess the aod thing la...just installed aod last nightQUOTE(AMDAthlon @ Jul 16 2009, 09:17 AM) Then..i said again..lower more ur NB Freq..maybe around 1800?Since it help reduces stability..We are finding max clock for CPU...later time we will manage the NB.. the figure i gave u earlier is the max i can obtain..the 3.8ghz @1.392 is stable with the nb freq at 19XX..so i guess the figure is chun edi..or i need to reduce a bit more? |
|
|
Jul 16 2009, 09:50 AM
Return to original view | Post
#30
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ah_khoo @ Jul 16 2009, 09:28 AM) biostar boards are known to be AOD unfriendly, i only use it for ACC adjust most of d time coz it's too unstable for even voltage adjustment. it's a fact that u gonna live w/ it as long as ur on biostar 790gx board. alternatively u can use biostar oc tool to tweak d volts... blend test fail mostly related to mem, be it timing, vdimm or imc. a fast google session tells me that it (d error ur gettin) could be page file related.  Source ya..similar case...but i dont think its relate to page file for my case...just notice when change few thing at AOD it comes to it...but not everytime... it ramdom.. still but nvm.prob solved. QUOTE u ain't need 28xx nb freq for 24/7 especially when no benchies are ran, a 2200MHz is more than enuf ledi... noted.. and 2000mhz suits me well.  and my oc mode is done... need to pack up things and get back to uni edi...the chip cant take further abuse... |
|
|
Jul 16 2009, 03:16 PM
Return to original view | Post
#31
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
another man falls down...to a ddr3
cloudwan...how hot ur tracer running last time? i have 2 80mm fan blowing at the top and bottom of ramslots..still i can feel the heat when run all four sticks.. when run 2..not as hot as this .. i touched the outermost ram..so no "air flow there not good la" for me... (and i priming with another 2x1gb ram have no activity at all... 32bit os tho )my casing airflow not so good. 1-2c (nb and cpu temp) increase when close the side panel.. huuu..even added a fan at the 5.25" bay |
|
|
Jul 16 2009, 03:37 PM
Return to original view | Post
#32
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ah_khoo @ Jul 16 2009, 03:30 PM) R & R for ah_khoo nowadays: change it next year ah khoo1. must not have extra stuffs pilin in d room. 2. old stuffs must go b4 new stuffs come in. 3. no more loan unless old ones cleared. u see my situation bro... i thought ur sellin off ya raven? d $$$ can buy more than a board ledi...  so then i can buy ur mobo leh..huuu QUOTE(cloudwan @ Jul 16 2009, 03:32 PM) Perghhhhh, u run 4 stick but when i was using it i only use 2 sticks no..i feel the most right and most left (left side of #1 and right side of #4) so no bad airflow at those 2 place.. in between yes..  Of course the temp goes high coz the heat is hard to dissipate due to the tight fitting between 4 rams RAM temp never was an issue to me b4.. but still hotter then when running 2rams... nvm la..will take out later.. just wan to see the bling2..hehehe @ah khoo.. ur right..it short circuit.. i put a "half screw" (donno waht to call it) at the place that have no hole at the mobo..so the ramslot lands on it... haish..sorry last time This post has been edited by kuntawakaw: Jul 16 2009, 03:39 PM |
|
|
Jul 16 2009, 03:53 PM
Return to original view | Post
#33
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(ah_khoo @ Jul 16 2009, 03:46 PM) yup, that's d latest price from kitkit in garage sale bro. u should have wait for few more weeks... kitkit also selling the 790gxe 128 at rm335..demm makes me wan to sell off my board..luckily i will head back to perlis tomorow..so cant cod with buyer from kl..so cant sell..lucky2 i am.. yup, d el cheapo ddr3 i reserved few days back... cheaper than my ex reaper which is sold @ $110... can't wait next year bro, else my ddr3 will turn rusty...  u can't just put like that mah... u dun have platic type one meh?  huuu..no.so now i put some doubletape ( i got alot when wrongly bought 3m tape twice ) to make sure no iron/electical conductive thing in contact..huuhuhuh haish..this sem my ptptn finish edi even havent start class yet..so i miss the chance to DFIsm myself @cloudwan ya..thankfully not burn..since i did tried it dozens of times la.. hehhe.. ya.bling2 cant apart from me.. but the hard part is, when want to oc, i need to take off the side panel.. or just take everything out. huuuu This post has been edited by kuntawakaw: Jul 16 2009, 03:56 PM |
|
|
|
|
|
Jul 16 2009, 05:16 PM
Return to original view | Post
#34
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(stardust_kkk @ Jul 16 2009, 04:26 PM) just found out my XFX 750a board actually hav ACC function..anyone hav phenom 2 550 can borrow me try see can unlock core or not?? all i know the 9XX series did have the nvacc and its the "renamed" 750 chip..eventho rename i think it not support the nvacc... donno..not a nvidia chip userand quite hard to heard nvidia chip can unlock... QUOTE(cloudwan @ Jul 16 2009, 04:48 PM) Or me and kuntakawakaw favorite: heheheh » Click to show Spoiler - click again to hide... « for sure will buy that when jump..the led is more distributed.. mine only at the middle of the stick..huuu now my temp make sense..at least a bit idle at 30...(isit becos of the higher ambient? hmmm) Added on July 16, 2009, 5:23 pm QUOTE(cloudwan @ Jul 16 2009, 04:46 PM) Buy these: 1  <= My vote, but the price is kinda high kot? 2  3  4  QUOTE(cloudwan @ Jul 16 2009, 04:56 PM) This is what listed at hardwarezone.sg: This post has been edited by kuntawakaw: Jul 16 2009, 05:23 PMG.SKILL Trident PC3-12800 DDR3 Dual Channel Memory Kit USD75 Kingston HyperX 4GB DDR3 1600MHz Non-ECC CL9 USD85 OCZ DDR3 PC3-12800 Platinum AMD Edition USD89 Patriot DDR3 Gamer Series for AMD Black Edition USD96 crucial balistix tracer $89.99 |
|
|
Jul 16 2009, 05:34 PM
Return to original view | Post
#35
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(stardust_kkk @ Jul 16 2009, 05:27 PM) Yea..i didnt notice tis function all the time..till last night i playing with bios only i saw it at CPU section there below the cool n quiet option hehehe..gud luck..i think its quite hard la eventho u have..wah..if can unlock i no need buy new board already  last time someone did ask the same thing..but he failed.. donno what kind of fail..but fail besar.huhuhuh QUOTE(ah_khoo @ Jul 16 2009, 05:27 PM) if want bling2 why not go for normal ram + geil cyclone mem cooler... ayoyo.. lagi gempak...  » Click to show Spoiler - click again to hide... « wierd la... the TT case fan also i look at it with emotion...if can customize the words there, ok..but ThermalTake and Geil makes me  ventrilock.. just get a kingbox ram..hahaha also have led wat This post has been edited by kuntawakaw: Jul 16 2009, 05:34 PM |
|
|
Jul 16 2009, 05:44 PM
Return to original view | Post
#36
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(babyyi @ Jul 16 2009, 05:41 PM) any 1 heard Corsair XMS3 Platinum DDR3 1333 CL9.9.9.24 ni? u really wan to change to ddr3 a?btw taken from ATI thread.. and i very sure that its belong here... TWKR for sale!! |
|
|
Jul 16 2009, 07:38 PM
Return to original view | Post
#37
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(momuchi @ Jul 16 2009, 07:23 PM) TA790GX 128M with new beta bios 78DEA715, can unlocked 0915FPMW and pass 2000MHZ HTT. mind to tell me what is ur proc temp? just doing a survey..this bios also detect X2 550BE.. load and idle pls... at the best case airflow...can? |
|
|
Jul 16 2009, 09:43 PM
Return to original view | Post
#38
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(verdict @ Jul 16 2009, 09:03 PM) kunta now had a highest OC result 3.8Ghz with stable unlocked core! sure ppl will beat mine la.. look at their board..look at their cooler...look at the vcore they able to push for 550 BE user,fast fast beat his record! BTW 955 is good running with DDR3! in AM2+ hard to make it stable! for me 3.8ghz at 1.392vcore is consider good edi for my personal record... hard to make it stable at that vcore u know...few attempts fail.. so that is the max..no more update from me and also no more daily update on ur thread edi..u may rest in peace This post has been edited by kuntawakaw: Jul 16 2009, 10:11 PM |
|
|
Jul 16 2009, 10:34 PM
Return to original view | Post
#39
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(xcen @ Jul 16 2009, 10:32 PM) 4 core @ 3.8? x4 3.8 @1.392vcore? u gila ka..This is what I call pro hahaha its x2 la... x4 afraid to do any prime stable test..my mosfets is burning.. so better aim for x2 1st...later dont have things to play edi..huuu |
|
|
Jul 18 2009, 11:33 AM
Return to original view | Post
#40
|
|
Senior Member
3,795 posts Joined: Nov 2008 From: Varies....
|
QUOTE(verdict @ Jul 18 2009, 04:39 AM) New OC result with so so setting! yeah..wheres the record breaker result?i want more..4.0 since u using wc... if air cool also i wan 4.0 since u an otai.. » Click to show Spoiler - click again to hide... «  wakakakkaka bobiac, u break my record edi or not? huhuhh 1day only not able to online,u all spam alot..huuu |
|
Topic ClosedOptions
|
| Change to: |  0.0562sec
 0.34
 7 queries
 GZIP Disabled
Time is now: 30th November 2025 - 03:29 AM |
Quote
