tat fan on ur megashadow is sure sexay!

thanks bro...but its megahalems oni...
no moneh to buy tat megashadow...

looks like magashadow, i got conned, haha lol
gonna get the same fan as urs 2day, cant wait!!!!

haha...yeah2 in the dark its looks little bit like megashadow,with the right lighting...
i already add another 1 fan at the back of it...
doing push n pull config now...
nice bro,go grab it...

juz got my fan, nice guy dealing wif linloong, recommended seller!

My RS (soon just Black Scorpion) waiting to be fitted on 955BE C3 in 770-C45....at first want to use CM blue fan, but me think want to use Delta FFB1212EHE... wonder how far can 955BE go on these combination?

hi all,
Nice forum here.

I bought two sinks today, "SilenX iXtrema IXC-120HA2" and "OCZ Vendetta".

According to frostytech.com, Vendetta is one notch above Thor's Hammer, and SilenX is one notch below HDT-SD964...

Wanna ask:
1. How much roughly the two Xigmatech i mention above: Thor's Hammer & HDT-SDT964?
2. Anyone tried using just the heatsinks without fan?

---

Added on January 16, 2010, 8:11 amFrostytech here: => http://www.frostytech.com/articleview.cfm?...eid=2475&page=5

This post has been edited by alexei: Jan 16 2010, 08:11 AM

XIGMATEK UTgard (Transparent Side Panel) = New Arrival! Available in Garage Sales Now!
Model: CPC-T90DB-U02 [Without PSU]

Official Product Link - Click Me
Spec / Special Features :
All mesh design on front panel.
Screw-less tooling for 5.25" bay installation.
Screw-less tooling for expansion slot installation.
Four 3.5" HDD in three 5.25" bay adapter.
Preinstalled 170mm top orange fan with white LED.
Preinstalled 120mm front and rear orange fans with white LED.
RPM speed control knobs for six fans.
Back window for easy CPU cooler back plate.
Back holes and clips for cable management.
Anti-vibration rubber for PSU.
Dust filter for PSU cooling fan.
Tool-free holder for bottom 14cm fan.

Overview :
Classic chassis exterior contains pure black coating interior even with each screw. It is more elegant and fancy design than any other mid-tower chassis with ATX, Micro-ATX, ITX form factors.

Utgard was designed by gaming and cooling thinking within tool-free hard drives and add-on card installation, easy installation CPU cooler back plate window, four pipe holes for water cooling system and seven cooling fan space at most.

0.7mm SECC chassis body, both side 5.25" tool-less holders, anti-vibration rubber on PSU space, and HDD tray with rubber screw holes are all the user-friendly and system-stable concepts.









This post has been edited by lingloong: Jan 23 2010, 12:56 AM

Not bad ler.. Match with DK P55 board

the front panel look like K62 or CM690

Hi bro lingloong. the UTGARD casing side panel is how??.. i saw the website got 3 type.. so the 1 u r selling now is same like

the pic u posted in first page?? THXs

Supplier only bring in Transparent Sidepanel Only at the moment Sorry for the confusion

Model: CPC-T90DB-U02 [Without PSU]

bifrost user reporting in... bifrost that revived my dead 8800gt.

[attachmentid=1449110]
sori pic low quality. camera phone.

waiting for someone to sell me used dark knight... anyone?

can i join here?
Xigmatek Asgard user here

picta coming soon....

---

Added on February 20, 2010, 12:13 amwanna get a cpu cooler
which 1 better between both of these?
Red Scorpion S1283 or HDT-S1283
and what is their price respectively?
tq

This post has been edited by happyfamily: Feb 20 2010, 12:13 AM

Hi everyone. I'm new to the forum but from what i can see it's a good one.

I have some enquiries re the Xiggy Thor's Hammer.

I purchased my Thor's Hammer on 12/10/2010 from a dealer in Imbi. The base looked flat,i.e it did not let any light through between the aluminium shims, and the
base had been ground so the nickel plate was removed showing the machined copper finish. Can i take this to be Version 2? How do i positively identify it as one?

Also, i read here that though the TX-3 TM compound is supposedly the more advanced one from Tuniq, the earlier TX-2 works better for HDT cooler because it's higher viscosity
allows it to permeate the gutters between the aluminium shims and heatpipes well, making an effective heat conducting interface. TX-3's lower viscosity makes this
harder to achieve.

Correct?

Are any further mods required on The thor's Hammer if it is version two?

Thanks

hey guys, i wanted to buy lancool k62..compared with Utgard, is there a big difference?

Correct me if I'm wrong, but I think both are the same, except for the fan used.

I myself originally used Red Scorpion, now the fan changed to Delta FFB1212EHE because I can't really see the led (HSF facing down because motherboard/casing limitation)

hye xigmater 550w psu user here, going to find casing fan for bottom intake and cpu cooler

how much is this casing?

Anyone know when will XLF-F1455 be available in Malaysia?