8pcs xigmatek running in my cosmos black
cheers
### XIGMATEK User Club V1 Discussion & Support ###, Pics & Reviews Most Welcomed!
|
|
 Jun 20 2009, 04:52 PM
|
 
Junior Member
412 posts Joined: Dec 2007 From: kl,malaysia   
|
|
Quote|
|
|
|
|
Jun 20 2009, 05:16 PM
|
Senior Member
1,256 posts Joined: Aug 2007 From: Ampang TO Sibu
|
QUOTE(loongking @ Jun 20 2009, 04:52 PM) 8pcs xigmatek running in my cosmos black Wah, 8pcs total! Kasi picta picta cheers   Lai Lai show off ur 8x in COSMOS  Added on June 20, 2009, 5:19 pm QUOTE(kianweic @ Jun 20 2009, 01:25 PM) Early this morning, I managed to replace the GPU cooler for my old Zotac Geforce 8800GT. Thanks for the info Bro The old Zalman Fatality GPU Cooler (Now up for sale) The difference of the idle temperature between the Zalman cooler and Xigmatek cooler was around 6-8c (with both running at full speed). Xigmatek cooler @ full speed is a lot quieter than Zalman cooler @ full speed. Previously with Zalman cooler, it was around =56-60c Now with Xigmatek cooler = 50-52c Please not that this was tested in a room without air conditioning, will update results when the aircon is switch on later. I would not be able to test the load temperature as my old PC has no games in it at all. Pros: 1. Silent (even at fullspeed) 2. Fans can be replaced if needed be. 3. Quite easy to fit in 4. Wide compatibility 5. Good availability Cons: 1. Takes up more than 2 slots 2. Instructions not as clear as the Zalman counterpart I would recommend this to anyone who are quite annoyed with the heat and noise generated from their stock coolers.  So how bout ur GPU weight after you put on the BATTLE AXE?  Hopefully this can help for other who opt 3rd party cooler for GPU to decide which one they should go for This post has been edited by lingloong: Jun 20 2009, 05:20 PM |
|
|
Jun 20 2009, 05:23 PM
|
Senior Member
837 posts Joined: Oct 2007 From: Penang
|
6 x XLF-F1254 fan Top x2 Bottom x1 Rear x1 Front x1 DK x1 [ Another pc with 8 x XLF-F1254 fan - pictures coming soon ] This post has been edited by shawnlut: Jun 20 2009, 05:27 PM |
|
|
Jun 20 2009, 06:17 PM
|
Senior Member
3,809 posts Joined: Sep 2007 From: Jakarta
|
QUOTE(lingloong @ Jun 20 2009, 05:16 PM) Wah, 8pcs total! Kasi picta picta It is heavier by around 300g to 500g I think as I didn't weigh after....too excited to insert into the casing. Lai Lai show off ur 8x in COSMOS Added on June 20, 2009, 5:19 pm Thanks for the info Bro So how bout ur GPU weight after you put on the BATTLE AXE? Hopefully this can help for other who opt 3rd party cooler for GPU to decide which one they should go for Anyway, my dad's PC was as heavy as it could get. This is a good product and also a very affordable one for those who owns a Geforce 8800GT or GTX2xx (untested). I won't mind getting this for my next Geforce GTX285 (that is after I change the entire casing, the current one does not have enough clearing to support another Geforce GTX285 with Xigmatek BattleAxe. The Zalman Fatality GPU cooler sold. This post has been edited by kianweic: Jun 23 2009, 08:41 AM |
|
|
Jun 21 2009, 11:31 AM
|
 
Elite
5,434 posts Joined: Dec 2006 
|
I've 10 units of XLF-1253 and they look very nice
just the air flow a bit weak but no matter how, i can sacrifice some air just to get a stylist look inside my casing  |
|
|
Jun 21 2009, 11:46 AM
|
Junior Member
404 posts Joined: Jan 2009
|
i help my fren build a rig. using Thor's Hammer pair with E8400, i clocked it at 9x450=4050mhz 1.26vcore. when i use linx to test the system stability. cpu temperature went up to 87c (non-aircon room). i double checked the cooler , installed correctly. but when stress with linx , i touch the heat pipe of thor hammer, didnt feel hot at all,but when stop stressing ,after 30 second went back to 40c, is this consider normal?
|
|
|
|
|
|
Jun 22 2009, 12:23 AM
|
Senior Member
4,667 posts Joined: Jan 2005 From: UniVeRSiTy Of MaLaYa 
|
Mind if im join hohoo
   |
|
|
Jun 22 2009, 02:44 AM
|
Junior Member
334 posts Joined: Oct 2008 From: KL
|
QUOTE(bulibulizaimon @ Jun 22 2009, 12:23 AM) Mind if im join hohoo damm cool.. after dis will upload my archiles pic.. This post has been edited by nabilfareez: Jun 22 2009, 02:45 AM |
|
|
Jun 22 2009, 05:07 AM
|
|
Senior Member
9,436 posts Joined: Oct 2006 From: Oz 
|
QUOTE(AceCombat @ Jun 21 2009, 11:31 AM) I've 10 units of XLF-1253 and they look very nice 3 of 10 fans is it mine? just the air flow a bit weak but no matter how, i can sacrifice some air just to get a stylist look inside my casing  QUOTE(nncl @ Jun 21 2009, 11:46 AM) i help my fren build a rig. using Thor's Hammer pair with E8400, i clocked it at 9x450=4050mhz 1.26vcore. when i use linx to test the system stability. cpu temperature went up to 87c (non-aircon room). i double checked the cooler , installed correctly. but when stress with linx , i touch the heat pipe of thor hammer, didnt feel hot at all,but when stop stressing ,after 30 second went back to 40c, is this consider normal? You sure the heatsink got touches the proc? |
|
|
Jun 22 2009, 06:42 AM
|
|
Elite
5,434 posts Joined: Dec 2006
|
@Shawn koko
Wah,that day u mms me the pic not so clear,today i see liao going to sell all my orange blade one and change to 1254.@Xiukeong yup,three of them is urs one |
|
|
Jun 22 2009, 12:28 PM
|
Senior Member
1,143 posts Joined: Aug 2006 From: not everywhere..but somewhere..
|
3pcs and counting!
|
|
|
Jun 22 2009, 01:28 PM
|
|
Junior Member
404 posts Joined: Jan 2009
|
QUOTE(XiuKeong @ Jun 22 2009, 05:07 AM) You sure the heatsink got touches the proc? |
|
|
Jun 22 2009, 01:32 PM
|
|
Senior Member
3,809 posts Joined: Sep 2007 From: Jakarta
|
Tested Xigmatek BattleAxe when air-condition is on.
Idle: 46c |
|
|
|
|
|
Jun 22 2009, 07:40 PM
|
Senior Member
543 posts Joined: Jan 2003 From: Shah Alam
|
the default low temps of my 9150e and the achilles that i got from lingloong seem to keep my temps around 28-29 on idle
 one thing to note though, for anyone planning to get a Cooler Master casing with side window. the acrylic i just a little too thick to close the panel properly, and the fittings are a bit brittle, so need to be careful when taking it out  however, if you're buying an nvidia version casing, the acrylic thickness is just nice |
|
|
Jun 22 2009, 07:48 PM
|
Senior Member
1,413 posts Joined: Nov 2004 From: KL 
|
s1283 vanilla user here
|
|
|
Jun 22 2009, 09:01 PM
|
Senior Member
3,174 posts Joined: Oct 2008 From: Wonderland
|
any thor hammer user here beside me?
 Volt as user found. what is your idle and max load? This post has been edited by piumiu: Jun 22 2009, 09:03 PM |
|
|
 Jun 22 2009, 10:35 PM
|
|
Junior Member
404 posts Joined: Jan 2009
|
QUOTE(piumiu @ Jun 22 2009, 09:01 PM) any thor hammer user here beside me? hey, i got some question about thor's hammer, are u feel heat at your heat pipe when stressing pc?Volt as user found. what is your idle and max load? i hlp my fren build a rig , pair thor's hammer with e8400 clocked at 4050mhz 1.26v(bios set), idle temp 38c to 40c, OCCT 69c max, linx went up to 88c  can u please share your experience with me? thank youp/s:Thor's hammer with 2 cooler master "90cfm" 120mm fan This post has been edited by nncl: Jun 22 2009, 10:37 PM |
|
|
Jun 23 2009, 12:26 AM
|
All Stars
12,413 posts Joined: Jan 2008 From: KL - Cardiff - Subang - Sydney
|
LinX went up to 88c with thor hammer summore with 2 fans?
 my e8400 4.1ghz 1.35v LinX oni max 73c,archilles s1284 idle temp almost same,38 - 40c This post has been edited by ZeneticX: Jun 23 2009, 12:26 AM |
|
|
Jun 23 2009, 01:39 AM
|
Junior Member
235 posts Joined: Jun 2006 From: Puchong
|
QUOTE(Volt @ Jun 20 2009, 06:19 AM) Thor Hammer user reporting in Yo how did u tighten the fan on Thor Hammer? BTW have a look on my rig to tell me did I place it the correct way, thanks.   It's really a pain in the *** to fix that thing, me and my friend were kinda noob but luckily managed to fix it. Attached thumbnail(s) 
|
|
|
Jun 23 2009, 07:31 AM
|
Senior Member
671 posts Joined: Jul 2007
|
@piumiu
While running at 3.7ghz, my processor (intel Q9550) is idle at 43c and load at 70c. quite ok for a casing without a good airflow haha @nncl Bro, i think theres something wrong cos last time my e8400 (at 4ghz) only reach 35c at idle and 63c during load while using cm hyper 212. Better check ur cooler back, u might not setted the cooler properly @Gray Fox [X] Usually i just attach the cooler and the fan first onto the motherboard. after that i just screw the mobo with the cooler attach on it inside the casing. to much work if i attach the cooler /fan later Anyway, theres nothing wrong with the way u place ur cooler. the reason i place mine like that because my top fan can draw out the hot air better then my 8cm exhaust fan + i can cool down my graphic to This post has been edited by Volt: Jun 23 2009, 07:35 AM |
| Change to: |  0.0250sec
 0.33
 6 queries
 GZIP Disabled
Time is now: 5th December 2025 - 12:41 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.