I getting a HAF922 for my casing

Will be no issue for HAF922

Wats RS btw?

whats the difference between dark knight, Achilles and red scorpion??? '

Dark knight and achilles price same.

RS = Red Scorpion (short form)

---

Added on October 27, 2009, 6:45 pmBasically, RS & DK in term of performance will be quite same, using 3pcs Φ8mm high performance U type heat-pipes. DK is black nikel plated and come with LGA775/1366 crossbow, while RS is using push pin configuration. Different theme is the factor if user either go for RS or DK depend on their preference for cooler/casing theme

For Archilles, main different compare to RS/DK is that it contain more heatpipe for better cooling. Supported by 4pcs Φ8mm high performance U type heat-pipes, it should dispatch more heat and better cooling capability slightly better than RS/DK

Price wise, as DK got the included crossbow while Archilles only have push pin, should be around same price if you want to compare this 2 coolers. Of course crossbow can be purchase separately for RS & Archilles. FYI, for next batch stock, there will be a crossbow to support LGA775/1156/1366 all together along with horizontal bracket for AMD user as well

This post has been edited by lingloong: Oct 27 2009, 06:46 PM

so which one you suggest for overclocking PII X4 955?

huhu been bz.. forgot to upload the pictar

so here my DK and NRP 650w

My vote will go for Archilles + Tuniq TX-3 thermal paste to push ur X4 955 to the max

---

Added on October 27, 2009, 8:21 pmWah so "blue"

This post has been edited by lingloong: Oct 27 2009, 08:21 PM

U guys have any thought on removing the dk? Since two of the screws are blocked by the fan so that means tha fan must be removed first but the mounting rubber doesn't seems easy to be removed. Any of u have tried removed it before? Ask this just in case.

The cons about this xiggies, removing the mounting rubber is bit difficult plus you need to stretch it out first. During installing do not completely push the rubber into the fin's notch, it will hard to take it out later on. Or in other way we can squeeze the rubber out from the fan by using the long nose plier. Either way, I am still sacred as the rubber seems to putus when we stretching it. However the pros are, the rubbers can be purchase separately and easily available from xigmatek sellers here in lyn . No need to worry as some other products using the pin, which in case broken... the owner have to look hi and lo to find the replacement.

I'm 2nd to the bold letters The rubber for my RS also not completely push in to enable me to pull it out easily for cleaning. Just stick it "halfway" for all 4pcs, it should be fine anyway

huhu yeah.. now just want to wait blue xiggy fan to replace 2 for the rear and 1 for the DK

OMG! I've already insert it completely long before this! Guess I'll have to do it the hard way if I need it disassembled.

And TS seems like have change from xigmatek fan to roccat fan(not spinning fan but idolize).

i use tweezers to pull the rubber out...

its abit more tedious yes, but not much difference la...

sometimes i pull the rubber out of the fan first using needle nose pliers to squeeze it through but more tedious though.

Just want to know hor...if i get the xig's 500watt psu...will it be able to power either 8800gt or 9800gt or ATI4770 ? Was thinking to get one...

Xigmatek 500W should be decent enough for your 8800GT or 9800GT This PSU support till HD4850 & GTS250 for Nvidia

"FYI, for next batch stock, there will be a crossbow to support LGA775/1156/1366 all together along with horizontal bracket for AMD user as well"

@lingloong

when is next batch coming? u mean even RS will come with it?

Will be around end of November. I mean the new Crossbow will be compatible with all Intel socket, it's not included for RS as you need to purchase it separately

mine is H1283 red scorpion. Unfortunately the push-pin legs are f*cked up. so i must lay my CPU horizontally rather than vertically.

is there any push-pins replacement parts that i can buy at lowyat? coz i dont wanna buy a new heatsink

IMO:
pros: good performance at affordable price

cons: hard to attach the fan to the heatsink.... and hard to install the heatsink onto my Rampage Formula mobo

How to post pic anyway? coz i wanna share too

This post has been edited by Darksorrow3010: Oct 30 2009, 05:59 PM

u can get the crossbow kit from lingloong

more secure coz it uses a back plate and screws