it works
unless something stupid with ur bios file, or interruption during the flashing.. other than that should work fine

---

Added on July 9, 2009, 9:10 pmcheck first page about rebelhaven forum..
bios ami, u can learn there

This post has been edited by xixo_12: Jul 9 2009, 09:10 PM

wat if time flashing..blackout?
will the bios flashing corrupted?

quote back



it does include in that factor

and prepare to send for rma

Yap..BintangBio is able to revert to older Bios... In my less than 1 month ownership, I flashed back and forth oso dunno how many times....except for the latest one at that time which had some issues with the USB...

BARANG PANAS!!!

He He He...



This post has been edited by verdict: Jul 9 2009, 09:57 PM

advertisement

LAgi 1 oRg TaKut fLaSh bIOs pUlak
@amdhunter
uR MoBo VeRsiON iS ?? 5.0 or 5.1

ya lo

tak flash lagi ker??

tak

ok tapi kalu paka kat high end rig cam x padan je bro, isn't it????

nganjing yer...

not all but chances are big... that's a 3.9GHz prime stable batch...

u need special bios from china i think, or ask d japanse guy in xs...

can w/ special bios...

can, have a read here... in mandarin thou...



http://bbs.ocer.net/thread-290146-2-1.html

This post has been edited by ah_khoo: Jul 9 2009, 10:33 PM

kenapa takut ker?

set default sblm flash, karang tak boot plak..

cubalah dulu jangan takut...

baru running system ler bro
btw,i will try flash the bios once ready

Flash BIOS very normal and easy only. Won't have a problem if you follow instructions and also the motherboard must be good condition, not rosak la.

GX A3+ modded bios

http://www.xtremesystems.org/forums/showthread.php?t=228782

i'm not responsible

done moding..80mm fan blowing right to the ram...from above

and xixo..the m3 tape u mention just now, it that the grey color wan? since that is the most thin i found (and also the same few rolls of tape laying in my storeroom)

Bro nak senang pkai ezyflash ajer, masuk bios file dalam thumbdrive, cucuk thumbdrive, on pc, masuk bios, pastu tekan key utk ezyflash

---

Added on July 9, 2009, 11:07 pmBeli 3M thermal tape kat mana bro? Tau td mintak pesan beli lebey2..

This post has been edited by cloudwan: Jul 9 2009, 11:07 PM

tomolo will go again..i think i just bought a normal double sided tape..
since "mane ace hardware ni..xjmpe pown" and i end up at a DIY shop that selling no thermal tape..haish...

nvm..the tape i bought still usefull tho...for other sticking purpose

board aku tekan F12..hehehe
same kan? rekemen org pkai ezyflash nape? afudos?huhuhu

This post has been edited by kuntawakaw: Jul 9 2009, 11:12 PM

Yup tekan F12..
Untuk org yg xtau AFUDOS kira lagi mudah ah... takut nanti jadi kes AFUDOS /l/u/p/a/t/a/m/b/a/h/l/i/n/e/b/l/a/k/a/n/g/n/i

Tak jugak...

To me, a high end rig is either for showing off or got a lot of money dunno what to do...

However, the purpose of the rig is usually associated with computational power and that translates to a powerfull processor, high speed ram, quality chipset and X2 Graphics card...

Imagine this...a Blood Red F430 with carbon seats, no radio, no Bose speakers and no carpets...but what it does have is a remapped ECU from Koenigg, a set of titanium exhaust from J&E, uprated suspension by Eibach Ferdern and 600bhp worth of horses under its bonnet...

Or, do you prefer the same model without the goodies mentioned, but it does come with an Alpine F1 headunit+processors+amp+monoblock, Bose all around speakers n woofers...??

What say u??