maybe you can try put superglue on the inner ring...then try again?

the BD cannot read because it is whobbling inside the ps3. ps3 cannot read...so mayb superglue the inner ring can help? but try to avoid uneven superglue...one side very thick, one side thin.... slight difference shud be ok

maybe you can try put superglue on the inner ring...then try again?

the BD cannot read because it is whobbling inside the ps3. ps3 cannot read...so mayb superglue the inner ring can help? but try to avoid uneven superglue...one side very thick, one side thin.... slight difference shud be ok

superglue the inner side...so its stronger and not extend....

bd drive can read easier....

but must careful dun put the glue near the data area, superglue are corrossive. since the bd also no use edi, can try loh.

superglue the inner side...so its stronger and not extend....

bd drive can read easier....

but must careful dun put the glue near the data area, superglue are corrossive. since the bd also no use edi, can try loh.

ah damn, i found a tiny crack on my RE5..

Today, since is a holiday day, and nothing to do. So, i just wanna do a measurement on the crack line and check will my ps3 causing the crack line to extend.

I put the killzone2 disc in PS3, with roughly about 10-15 times to eject, insert, eject, insert, eject, insert, eject........and finally it load up the game.
Have an hour of Killzone2 online session, take the disc out.
And found that the crack line already silently extend into the data area for another 5mm.

I believe that if the disc already got crack sign, and we keep on playing it.
The crack line will keep on extend.

My killzone2 =.=, may u rest in peace.
And my others 2 disc, RE5, and SF4...will join the ceremony soon.

huyoo, cracking disc, i tot 3rrod and e74 is da onli probl3m