Forget DDR2 liao ...
i'm moving to DDR3 soon... LANPARTY DK 790FXB-M3H5 Yummie...

Haha..
This is my latest screenie..SPI 32M Stable..Prime i forgot to take SS..but mayb u guys can ignore it first..Dont have time to do prime for now..So SPI 32M first
I seems cant pass 260 HTT no matter what..Even i tried to set lower NB Frequency Via Bar Edit..
Any other way?The NB Frequency i increase via Bar Edit becos i cant get past 260 HTT..

Masa utk tukar mobo bro......xblur with nb feq

kalo tidak bleh campak tu proc kat i cheap cheap

Haha..
No change mobo no change proc untill Propus..So i stuck there for few months lor then

hello guys,
i need some help on Athlon X2 7750 BE temperatures.

ive got it cooled with Big Typhoon VX in a Stacker 832 casing, it reads 39C idle.

now i've got it transferred to a htpc casing (XQBOX) with stock hsf, it hoots up to 50C idle. is this a normal temp for 7750 running on stock hsf? thx

Wanna ask sifu here..about my oc there..is it safe for 24/7 for tat vcore ? plus the tempeture on stress testing is 57c while in gaming is 54c...


Attached thumbnail(s)

I'm no sifu la but I think should be okay because with CnQ enabled, idle vCore will be lowered. Besides, so long your temp below 60 and you should be doing fine.

This post has been edited by hezda: May 2 2009, 12:55 PM

I got 7750 with CM hyper tx2 hsf....idle 35% + load 48% with fully alum case....ur temp is normal on stock hsf

---

Added on May 2, 2009, 1:01 pmFor long term usage..is no good ..will kill ur proc a bit - a bit until it say bye bye to...

This post has been edited by digswell: May 2 2009, 01:01 PM

That setting is fine for 24 hours for me... I even use higher vcore and clock.. open 24 hours..

i no think if enabled CnQ is a good idea unless it run on stock vcore.....if u got linux os....u can see how the proc proceesing....alwys up and down...vcore also same....the best is try to using stock vcore + a bit oc + enabled CnQ...

This post has been edited by digswell: May 2 2009, 01:07 PM

oh..aw..maybe will try with vcore below 1.4v...dunno can stable or not...

btw,even i go get a decent cooler also at tat vcore still not safe?

It is just suggested to make sure dont above 1.5V for 24/7..Eventhough i did it last time with my F3..for a few months..
Try get as low VCore as possible...If cannot,try achieve a higher clock for that VCore..

Example,if at 1.35V the clock is 3.2Ghz and at 1.4V clock is 3.6Ghz..That is acceptable..It is better not to pump voltage just to achieve a minimal amount of clock speed..

but is still running right?
i put mine high..~1.47 mebbe... since my pc will be for gaming purpose only and ill keep i that way for 2-3month.is that safe?

Very boring without OC

build another 1 more rig...then can play 2 rig together ..like me

No money le...Got my gf rig to play but don't want to fry the pc Hot weather.

---

Added on May 2, 2009, 5:41 pmSo are you selling your mobo?

This post has been edited by XiuKeong: May 2 2009, 05:41 PM

Damn frustating man. My board couldnt remember it's cmos after power down. Changed my battery, Clear cmos, Flashed Bios.
Done mostly everything the internet says.

Anyone can suggest better methods than rma? sudah rma twice, dah letih ni.

ape idol2 ni bro... me dah pencen lah...

not that i anti khx, but so far their ddr2 don't really impress me... had a bad experience w/ a pair of 2gb ddr2800 khx, can't even run @ rated speed...

depend on how other connectors are colored, if majority white connectors + red board, not bad imo... i don't find ultra infity cheap lookin for sure...

if d gatherin is held after june, there'll be another one attendin... but why oh why it gotta be end of june...

this mei mei gettin married on next day, now tell me how on earth "she" can attend...

i "chope" 1 can ah bro, ask bro -pWs- to pos lambat to me...

gotta ask d permission of my "hubby" as d next day gonna be our big day...

how bout bro coolice's 3.9GHz x2 720B.E bro, he diam2 use for himself only meh... so selfish ah...

well, they can have all d elites from other manufacturers EXCEPT DFI, msi + some flavo from dfi aint gonna mix well...

nice rig there mate, any preliminary results...

ur playboy bro, damn flirty... change harwares like i change my panties...

why u need to increase d nb freq while it mite be d thing that limitin ya oc?

not a pro as well but i would settle for that kinda clock, further burn in mite brin down d volt by a 'lil... gud luck mate...

=.=...sanko post on monday

bro, ask bro sanko to past me d chip 1st... i wanna test...

joke aside, ur goin down under to study ah bro?