i oso interest to noe actually, last time i use 8450x3, change to 6000+ without any prob(change chip)

thn oso tried change mobo, M3A78-EM > M3A79T-DELUXE (same series chipset/ same manufacture)
so, it dun come with any prob, but, since i ever kena virus during using M3A79T-DELUXE,
aft settle the virus thingy(w/o format) , it seem load in OS (winXP) vy vy vy slow...(*counting on the xp loading bar around 22 times oni go in OS )

this condition can ask bro ktek too, since i bring it to gathering, we do OC use my HDD, load in OS damn lama..

but aft come bec frm gathering, i change bec to M3A78-EM, dunoe y, it seem can load in faster(loading bar around 12 times) to OS compare to M3A79T-DELUXE (around 22 times)

i oso dunoe the exact prob, mayb is that i begin format this hdd on this M3A78-EM, so work better with it?

If format the hdd, have to format everything with the data or just the OS?

While my problem is load in OS is okay, but when in OS need to load very long just to wait for the comp to get smooth.
If not it will load very slow. Like I have to wait for around 3minutes in the OS for everything to get ready and okay to use.

OS part ok oledi..

hmmm.. mayb something start up obj too many?? u try to close all un-use startup obj..

and on the destop, dun put too much file o folder... shortcut is js nvm.. try that 1st.. see hv any improvement..

Even when I just format with a fresh OS it still take some time to load up. I'm guessing it's my HDD problem or not.

Ha Ha Ha...im newbies with memset...ekekeke...

now 3.8G in the making...he he he...

just wait and see and after that STOP !!!...

This post has been edited by verdict: Apr 9 2009, 03:13 PM

d loadin bar thingy can be optimized usin registry tweak, not necessarily mean if u need less bar u must own high end hardwares.

cdlim, i believe it related to hardware that attach to the mobo itself, i mean audio, sata, bla..bla.. so it required time to boot a little longer..

@zerohunter... try to look for similar problems in asus forum in their motherboard section...

I noticed something. Whenever I increase the voltage in AOD, it'll revert back to the default vcore.

try to disable every other things that u don't use also like the floppy, ide if u don't use it, raid, boot virus scan etc.. I find that disabling unused peripheral on the mobo does help a bit in booting.. Just my 2 cents ah..

that's why i mentioned aod aint really workin well w/ biostar 790gx series. version of aod & bios play some parts too.

not that i wanna promote, but so far fxb works 100% well w/ all d voltages. see my ss w/ aod u'll know what i mean.

very convenient for voltage tweak...

This post has been edited by ah_khoo: Apr 9 2009, 03:09 PM

so it seems the wall for 720be with 4th core unlocked is around 3.3ghz. Can anyone go higher than that? I tried with mine, but bsods even with cranking up the vcore.

This post has been edited by Kclee2002: Apr 9 2009, 03:07 PM

i also had mine 3306MHz only...

Maybe the previous version could help?

1 question I would like to ask. Since the 720BE is AM3 platform, then will it be able to run on an AM3 mobo with DDR3 RAM?

why not, it was meant to be that way, else they wouldn't call it am3 chip rite?

u can alway try but earlier versions are buggier iirc.


@ bro fuzore,

typo tu, ya clock was 3360MHZ wasn't it?

This post has been edited by ah_khoo: Apr 9 2009, 03:55 PM

Ehhh... haah la typo... he..he.. sory all hands still shaky when typing...

So it mean that it has DDR2 and DDR3 memory controller. Now I get it.

My room getting hot...aarrghh...

Full load for both deneb and NB is around 56c...