hey, mosabiro

thanks for inquiry,
just to inform that blue only left about 20+pcs, red 40+pcs, yellow 60+pcs

white no stock now,
all the shortages will be refill back by next week.
but dun hv blue stock to be refill, mayb late end of july will get the blue stock refill.

thanks in advance for your patient~

i look forward from you reply soon, as your feedback are always welcome~

noelogy

This post has been edited by noelogy2007: Jul 1 2009, 08:27 AM

dear all

white flux going to be refill soon,
please be patient~

thank you~

pm replied, please check

dear all, thank you for supporting,

White flux will be refilled by this week,

thank you for your patience.

hey doncity,

thanks for inquiry,
yes, can be mix & match

but the blue and white flux LED is out of stock for now
white flux LED will refill soon by this few days
blue color temporary no stock.

i look forward from your reply soon

thank you
noelogy

yes, if you can ensure your blowed LED specs is same with mine, then it can be apply.
it is just unsolder and resolder job (please ensure your resistor + circuit is function in good condition)

up to date 13/7/09

white- stock available now
yellow-stock available now
red- last 40+ pcs reserve for Brico
blue- stock is out for now

sorry, dont have UV for now

---

Added on July 14, 2009, 8:23 amPM replied~

This post has been edited by noelogy2007: Jul 14 2009, 08:23 AM

u mean downlight = car exterior under light?

if my understanding is car under light,
yes, you can mod it to car under light,
but u need to ensure the LED is seal in water proof condition to avoid rust/water/vaporize/short circuit.

note me if i was wrong.

look forward from your reply

noelogy

issit apply interior?

if you have the holder and frame as photo you attached,
yes you can mod to the design u wan.

for i say, many kind of battery also can be using.

you can use 2 x AA or AAA 1.5V alkaline battery, the LED will light up, the LED voltage is 3V (+/- due diff color diff spec)

you can use 12V~14V car battery also can light up them, but you need to add resistor in the circuit.

you can have your resistance calculator stated below,
http://led.linear1.org/led.wiz

hope this will help you

noelogy

This post has been edited by noelogy2007: Jul 14 2009, 11:26 AM

hey jason,

yes, u can put LED to your computer casing.

u need to ensure what is your power source voltage is,
then you use the input voltage data to key in to the calculator,
u will know whether you need any resistor / what value the resistor is.

beside, u also need to ensure the insulation is in a proper way

yes, we can COD at taman connaght McD after 5pm for weekday, and after 1pm by saturday.

glad to hear from you, anyway, i look forward for your reply soon, you feedback are always welcome~

noelogy

---

Added on July 15, 2009, 9:43 amhey mosa,

glad to hear from you~!!
look forward for your DIY photo, hahaha

noelogy~

This post has been edited by noelogy2007: Jul 15 2009, 09:43 AM

hey someone,

yes, i am ok to selling in 20 white if you want.

PM me your address, and i will give you all the necessary details for payment

thank you
noelogy

the custom PCB canot make into any shape, it is already custom made according to the design
the custom PCB is only for 3 flux + 1 resistor in series, not like those PCB with many hole.

how ever, the custom PCB has already sold out, which ordered by Cancirook

i look forward from your reply soon, as your feedback are always welcome~

thank you
noelogy

white stock available now, blue no stock
yes, by pos laju

PM replied.
pos laju only additional RM6

glad to hear that~

and PM reply ZIR~

---

Added on July 29, 2009, 8:26 ami will be out of desk for 3 days until friday, saturday i will be back

please leave msg and i will reply to you as soon as possible

This post has been edited by noelogy2007: Jul 29 2009, 08:26 AM

PM replied bro,
let me know if anything~

---

Added on July 30, 2009, 9:34 pmthank you slapdash~
nice dealing with you~

look forward from your next order~
hehe


This post has been edited by noelogy2007: Jul 30 2009, 09:34 PM

pm replied~

pm reply~ mystery

---

Added on August 3, 2009, 2:39 pmi have replied u with a clearer explanation
hope that u understand

i look forward from your reply soon~

This post has been edited by noelogy2007: Aug 3 2009, 02:39 PM