Define LED - History, Application (Click me)~!!
How LED works? (Click me)~!!
LED further explanation

1) white color flux----RM1/pcs only

Description MAX value
power dissipation ---------------100mW
peak forward current -----------100mA
continuous forward current ----- 35mA
reverse voltage -------------------- 5V
forward voltage ------------- (min)3.0v, (typical)3.3v, (max)3.6v


2) blue color flux----RM1/pcs only
Max 5v
Max 35mA
pls check below for further details


3) red color flux----RM0.80/pcs only
Max 3V
pls check below for further details


4) yellow color flux----RM0.80/pcs only
Max 3V
pls check below for further details


5) custom PCB----RM2.50/stick (no stock)


6) 150ohm resistor----RM1/10pcs

7) 200ohm resistor----RM1/10pcs



terms and condition

Minimum order quantity
40 pcs flux LED open for all color.

dealing method
1) bank in payment and i will send over stuff to you all via pos laju (anti press packing using)
RM 7 charges for all penisular malaysia, RM9 for east malaysia.

2) bank below are all accepted.
-CIMB bank,
-PUBLIC bank,
-Hong Leong bank,
-Maybank.

3) ATM transfer, cash deposit, online banking transfer are all welcome.

or

COD at
1) pandan indah steven corner shell petrol station
2) ampang carefour
3) cheras connaught

please PM for account number for payment.

This post has been edited by noelogy2007: Nov 6 2009, 09:01 AM

Resistance calculator (Click me~!!)

if you wanna put your DIY LED into car,
please use 14V to calculate for safe side,
1) white-25mA,3.6V
2) Blue-20mA,3.6V
3) Red-20mA,2.0V
4) Yellow-20mA,2.2V

This post has been edited by noelogy2007: Aug 21 2009, 03:08 PM

sample photo for display









This post has been edited by noelogy2007: Apr 1 2009, 08:15 AM

my successful trade list

1) slapdash41- 80 white, 20 blue- payment received by 26-4-09--item send out by 27-4-09--ETA by 28/29-4-09
2) nordingh - COD at carefour ampang
3) mosabiro - item send out
4) lamir loco - 100pcs white - COD ar carefour ampang by 11-7-09
5) brico - 40 pcs red - item send out 15-7-09 en197189415my
6) cancirook - 40 pcs white - 5 custom PCB - item plan to send out by 20-7-09
7) wei loon - 20 white
8) eng tat - 60 red
9) rui soon - 40 white, 5 red
10) david koh - 40 white, 20 red, 20 blue
11) mystery - 8 red, 8 blue, 4 white
12) ting - 21 white
13) 2uk3y - 20 red
14) ivan ho - 24 white, 22 blue, 10 red
15) after5 - 20 white
16) darkshining - 40 white
17)
18)

This post has been edited by noelogy2007: Aug 21 2009, 09:03 AM

see whether your application area,

just to clarify the casing just for display only,
and the main item is the PCB, that is y i purposely take 1 photo with only the PCB board.

u just only apply double tape at the soldered custom PCB
u can stick what ever place you wish t put inside the car.

This post has been edited by noelogy2007: Mar 31 2009, 05:58 PM

no interchangeable.
same type of color for each LED.

cruxs. i have already reply u in PM

nordingh, i look forward from your reply soon, thank you~!!

i have reply u in PM,
please clarify with me.

yes, per person 40pcs.
open for all color LED.

thank you everybody for supporting~
i will try my best to provide better service to you all.

not all,
but only white, blue, red , yellow
the chart just to show some technical specs.

if you wanna put in your bicycle,
u need to connect the LED to your 4.5V battery parallel.

the photo just show for display only.

---

Added on April 23, 2009, 8:03 amyes, u need the board to hold your LED firmly.
the board you can see in my thread, it is very easy to solder as the board is custom design for it, no need to cut board, no need to cut the line, u just onli put in the LED and solder ..then it will be done.

yes, u can put at your foot area, no problem, u can apply double side tape to stick what ever place u wish.

This post has been edited by noelogy2007: Apr 23 2009, 08:03 AM

one package content provided to you include LED, custom PCB, resistor, 2 wire
and you r the king that is going to solder, dun worry, the custom PCB has already printed circuit there,
no need any more cut and chop, the custom PCB has photo shown in the thread.
u just need to do is put in the LED, resistor, wire to solder onli....

and that is full of DIY fun during the process~

---

Added on April 23, 2009, 10:52 pmhmm, how should i say...
base on the sheet, yes...it should be pure white according to the chart.
but u can see in the thread showing the color is pure white.

hope this would help u



This post has been edited by noelogy2007: Apr 23 2009, 11:18 PM

yes,
in theory, 12v we count as 14V
u can put 3 white LED in series for a 150oh resistor.

dear all, i m back ~!!

just back from 1 week vacation~

sipout, i hv not received any you pm yet~
please re-send your PM to me~

thank you~

noel

yes, u can put as car signal light,
but not replace your existing original signal light,
just to add on,

if you replace your signal with LED, it will flash faster than normal

---

Added on May 21, 2009, 10:29 pmstock is limiting~
better hurry everyone~

This post has been edited by noelogy2007: May 21 2009, 10:29 PM

mr nordin,

it is my pleasure to dealing with you,
i just had my medicine, so kinda blur to calculate the total amount to you...hahaha

glad to see that you have your DIY~

do let me know if there is anything,
and nice dealing with you~

stock is limiting~

ya sure~bro
no problem

white LED stock is limiting~
last few pieces

---

Added on June 5, 2009, 7:54 amwhite flux, last 8 LED left~!!!

This post has been edited by noelogy2007: Jun 5 2009, 07:54 AM

sipout, pm replied