what dust filter do you all reckon? i think i want to fit dust filter also.

I don't have much choice here. So bcoz I bought some items from niclasteoh, I just bought from him to save postage cost.

Good new, I just received all the items. But still need to find suitable time to install everything.

---

Added on April 29, 2009, 2:40 pmHere are some picture:

Front panel, usb, 1394 and audio header. Credit to madman for the front panel idea.



This is my first time doing sleeving. I always wrongly measure the cable length and end up shorter than I expected. That why the shrinkable tube is too long .



The 3 SATA cables are very long and hard to bend. Actually, I want to hide behind the 24-pin power cable but they are too hard to bend. I also don't like the color, thinking of changing to orange or blue.



This side look cleaner with only a few wire.



I only used 4 cables, other I hide under DVD-RW drive.



Under UV light



UV CCFL is not in my first planning. But with 3 xqbox windows, I was tempted to add some blink-blink .

This post has been edited by qwerty79: Apr 29 2009, 02:40 PM

nice job, how come this tread suddenly so quite?

u need to redo the heatshrink for ur USB, firewire, and audio headers...

dont shrink the tube over the plugs itself...just over the cables only...otherwise itll tercabut like wat happened to urs....

also, give overall view from 3 sides please...closeups dont really tell the overall picture

My mistake. Will try to redo the heatshrink if got time. For the picture, will take some time. Need to borrow camera.

deman more more picture from both qwerty79 and engtat with his new dc

nice job there qwerty79

interesting setup.. i see that you like contrasting colors.. orange against blue(cables).. and the uv glow is mesmerizing to look at.. my box's similar to yours (dimension and layout wise) and you may reference it on how to hide your cables (but that defeats the uv effect huh?) refer to:

http://forum.lowyat.net/index.php?showtopi...&#entry24113330

i don't have that many cables as yours would.. but my psu wires are way too cumbersome.. it's all hidden inside the front bezel.. or rather said, just right behind the front bezel where the side vents are located.

This post has been edited by lwb: Apr 29 2009, 10:11 PM

The tread is not so active today Today i took alot of shot of my V351 but still havent assembled.
This is naked shot taken just now. Will update when got the time to transfer pics to the comp


Attached thumbnail(s)

wahaha.. .1st ever V351 in this thread loh ..

way to go bro, keep the thread interesting with ur full setup photo loh ..

Fast fast setup ur pc.... i wanna go ur house for LP hahaha than we take shoot with my Sugo haha

Lol, 2 more pics to racun, muahaha


Attached thumbnail(s)

not enough racun....sleeve ur cables~~~~~~

for time being not enuff moneh to sleeve ler, you want to sponsor sleeving kit or not?

any good hsf below 100mm to reckon, was thinking cm gemini2 s or sumthing better, if not i might end up using intel hsf

well..u can ask kuja regarding gemini2 (without S), he use it for his previous V350 setup

Hi

Any one seen Aopen S152 casing or chenbro itx (pictar below) around?
if there is any in ly then it must elude me last week...

cheers


chenbro link - DxWxH (mm) 260x140x260(mm)




This post has been edited by chamelion: May 1 2009, 05:50 PM

Very very nice itx casing
Can't help, nv see this case around

1 source i got is S$399 for chenbro that why i may ops for aopen s152.

aopen s150 can put 1x3.5" hdd where as s152 2x 3.5" hdd..

is that mini itx chassis? wou with 4 removable hdd...

yup. that's why is so adorable!!!



This post has been edited by chamelion: May 1 2009, 09:32 PM

I am planning to buy SFF casing, but dunno sg02 better or lianli v351 better?

can give me any suggestions? thx