---

Added on May 11, 2009, 8:49 amyep, that's what my exhaust mech recommended too, 1.7" for 4G15 (stock)
anyway, i'm using "modified" open pod air intake

---

Added on May 11, 2009, 8:52 amhave your mech check your wheel bearings.
cheap fix.

This post has been edited by masao343: May 11 2009, 08:52 AM

drilled holes in stock airbox
but it works, albeit the extra sound if sudden press of the accelerator.
i'm gonna do CAI when i have the time (and patience)

eh u mean u totally removed filter too? like this, dust/insects will enter ur intake system? (anyway, dont mention Suzuki RG sport, mine got stolen few years back, still feeling sad about it) i drilled holes on the underside and fender side of the airbox, so hope it would reduce hot air intake. but i'm still planning my CAI to help blow in some cool air.

was thinking about this too, but i think distilled water itself will work for this.
i still havent confirmed WHICH hose to let the intake sukk water in so dont dare to do yet

---

Added on May 11, 2009, 3:55 pmguys, i'm looking for ways to make my engine bay COOLER.
my extractor is current naked, so the heat goes directly into the engine bay (no good). also my air intake box is drilled, so it draws air partially from the engine bay itself. i had been playing with the idea of installing CAI, but right now, i'm thinking i should make the entire engine bay cooler (its good for performance, no?) i'm thinking, if i add some sort of scoop, or fender to deflect air from under the car into the engine bay, is it a good idea? i'm not sure about when it rains though... wat is your thoughts?

This post has been edited by masao343: May 11 2009, 03:55 PM

is it legal? but still, for now i rather not change fenders/bonnet as it is costly stuff... unless you go tips to do it without changing them?

it is facing away from the extractor lor, hoping it would reduce the chances of getting hot air direct from engine block and extractor, but still, my entire engine bay is rather hot since my extractor is naked (no heat shield after modify). if i make the conventional CAI hose like most cars, it wont work very well for me, so i'm still thinking about going ahead with making reflectors to reflect/guide air from under the front lips to the engine bay, wat do you all think ah?

wira one i dunno, but should be cheap la.
i just changed mine for Kenari, only rm17 for the rear wheel. but expensive is the labour charges?

---

Added on May 12, 2009, 10:52 amanyone here wanna sell their exhaust tip/muffler?
i'm looking for either one, thanks

This post has been edited by masao343: May 12 2009, 10:52 AM

yep yep, it is said that the BEST fuel saving thing for any car is the way you press/depress the gas pedal.

---

Added on May 12, 2009, 2:01 pmguys, wat do u think of this muffler, can buy?
he's from my area so its easier, cash n carry deal possible.
http://www.mudah.my/vi/3054736.htm?ca=11_s



This post has been edited by masao343: May 12 2009, 02:01 PM

i found Hong Sheng's address di. Taman Merdeka, near my parent's house. have u sent your car there before?
how is their work?

which part of tmn merdeka? is it near the main road of jln merdeka, or hidden behind one?
coz i only familiar with main road.... aduh
so can share how much u spent on your exhaust system? actually for me, i'm looking for muffler only now. my extractor, mid, piping already changed.