i will post new OC later...
new version ady...
i miss lot of information from u guys coz i busy before this...

sure can

a 24 incher lcd + 4580 cf + dragon platform, done!

bro 4870 1G single gfx can also rite.... 24" is too big for me 22" is enuff...

i think gtx260 core 216 is better.

d reason why i picked 24' is d resolution bro. no point takin 22' while 20' havin d same resolution.

a 24' should be around RM1k plus, a pair of 4850 cost another RM1k plus, d rest go to dragon platform + a decent pair of 4GB... kautim...

This post has been edited by ah_khoo: Jan 29 2009, 01:27 PM

say ur not goin for ddr3 platform,

am2+ 940 = RM9xx
dfi 790fxb @ RM6xx
a decent pair of 4GB = RM2xx

ade baki lagi tu...

nolah, decent mean above average, tracer can do d job ledi. ddr1000 w/ reasonable voltage is not a problem. or go gskill ddr1000 oso not bad, or even team dark (they're sellin cheap here in sls).

forgot about asus, yeah, since u'll have some leftover $$$, can go for ah shuuuu as well. still, i'll recommend dfi for sure, ah shuuuu x rox...

This post has been edited by ah_khoo: Jan 29 2009, 01:56 PM

frankly speaking, i dunno bro,

@ah_khoo..
settle kan this question

vnb and vhtt i dun think it might help u a lot, coz u sound pretty sure it come from ram right?
how about the timing?

i advice to stay below 2.1v for passive.. and 2.2v active.. shud stay below it, n try to play a lot with timing, maybe u want to sacrifice a performance using timing and gain something from Mhz

All ppl go grab new toys .... only left me use older 770 and F2

yea it's my ram...
i push the ram higher bt v same clock speed...
it keep on lockup...
ram alr loosen all timings...
vdimm alr 2.15v, vhtt and vnb alr increase 1 notch...
so i cannot improve my SPI 1M anymore...
so bad my crucial are dead...

Bro a once in a lifetime offer is really hard to get bro.... so i'm this chance

u using kvr rite? mybe already reach the max freq. last time i use kvr from bro dblooi bulk. max out at 1000Mhz. not completely stable though.

ur d ram tweakin guru bro, i'm just so so only...

i always have better luck in ram if compared to chip, that's why most of my oc are limited by chip.

basically as u mentioned, vnb + vhtt doesn't help much in ram oc, timin + vdimm are more important. my experience w/ value ram:

- if they're d9 chipset, they still can take 2.2v w/ active coolin
- can't really do tight timin, tightest i went was 5-4-4-x @ ddr1000 w/ 2.2v (prime stable)
- dun expect too much as they are value ram unless ur bein lucky gettin a gud batch.

memset & aod (for voltage adjustment only!!!) are useful tools for ram fine tuning...

This post has been edited by ah_khoo: Jan 29 2009, 02:34 PM

Ya go go tracer Hehehehe

wah like that mind to tell me where u "tersepak" those bunch of $$$...

i dun mind gettin my leg lite injured w/ this kinda incident...

d only thing i'm worry about is d degradin of d ram... it's not a rare issue for crucial ram, heck, even my beloved el cheapo twinmos ram oso "kene"....

This post has been edited by ah_khoo: Jan 29 2009, 03:04 PM

Guys u are all welcome to post in my Dragon Need Help recommendation thread....tq

No one wants to post there only viewing only....

---

Added on January 29, 2009, 3:12 pmha..ha..ha... bro its just an expression only ....if really happened like that la kan i want a bag full of moolah around 20K also can in US Dollar...

This post has been edited by fuzore: Jan 29 2009, 03:12 PM

help! my TA770 cold boot because of me not to restore default setting before flash using winflash.

before this,i have succesfully flash using bios menu.but because the lazy of me to assemble floppy drive,suddenly try flash using winflash and it's unwork! even say "do your want to restart your computer?".

so for guys,anybody from mlk can help me same board to do some hot flash?

anybody here?