i dont know which version of CS3 u have. but my version installed without prompt me for my resolution uncompatible. XP or 7 both have no issue installing it.

maybe ahem version problem?

i have no idea. but mine windows ori and cs3 ori. never give me problem

---

Added on June 10, 2009, 11:59 ami have no idea. but mine windows ori and cs3 ori. never give me problem

---

Added on June 10, 2009, 2:11 pmwe should have make an unofficial meetup to all the 2140's user so that we can help out those who faced problem with it.

kekekekek... at least tresca now can games with his 2140.

This post has been edited by fulat: Jun 10 2009, 02:11 PM

went and tried out the DV2. its really hot.

Please take note this is proven workable with Vista and 7. not applicable for XP or below.

Get the below ready.

1. Windows 7/Vista DVD(if you have ISO. u can unzip the ISO files with WINRAR to a specific folder)
2. USB 2.0 Thumb Drive (at least 4GB)
3. A functional Windows Vista or 7 OS ready desktop/notebook

Play-by-play guide to installing 7/Vista from a USB flash drive:

1. Format the USB Thumb drive to FAT32.(reason why FAT32 is because it run faster than NTFS)

2. Run CMD.EXE and type the following. WARNING: This set of commands assumes that the USB flash drive is addressed as “disk 1″. you should double check that by doing a list of the disks (type “list disk”) before cleaning it. If you have multiple hard drives, like an SDFlash drive or a Multibay drive, you could end up wiping your second drive using this command.

a) diskpart
b) select disk 1
c) clean
d) create partition primary
e) select partition 1
f) active
g) format fs=fat32
h) assign
i) exit

3. Copy Windows Vista’s/7's DVD ROM content to the Flash Drive

Once finish copying... take out ya thumb drive and u will have a bootable windows Vista/7 USB Thumb Drive.


cheers.....

This post has been edited by fulat: Jun 16 2009, 09:24 AM